| Age | Commit message (Collapse) | Author |
|---|
|
Perf-fix.
* ds/bitmap-lookup-remove-tracing:
pack-bitmap: remove trace2 region from hot path
|
|
The trace2 region around the call to lazy_bitmap_for_commit() in
bitmap_for_commit() was added in 28cd730680d (pack-bitmap: prepare to
read lookup table extension, 2022-08-14). While adding trace2 regions is
typically helpful for tracking performance, this method is called
possibly thousands of times as a commit walk explores commit history
looking for a matching bitmap. When trace2 output is enabled, this
region is emitted many times and performance is throttled by that
output.
For now, remove these regions entirely.
This is a critical path, and it would be valuable to measure that the
time spent in bitmap_for_commit() does not increase when using the
commit lookup table. The best way to do that would be to use a mechanism
that sums the time spent in a region and reports a single value at the
end of the process. This technique was introduced but not merged by [1]
so maybe this example presents some justification to revisit that
approach.
[1] https://lore.kernel.org/git/pull.1099.v2.git.1640720202.gitgitgadget@gmail.com/
To help with the 'git blame' output in this region, add a comment that
warns against adding a trace2 region. Delete a test from t5310 that used
that trace output to check that this lookup optimization was activated.
To create this kind of test again in the future, the stopwatch traces
mentioned earlier could be used as a signal that we activated this code
path.
Helpedy-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make clean" stopped cleaning the test results directory as a side
effect of a topic that has nothing to do with "make clean", which
has been corrected.
* sg/clean-test-results:
t/Makefile: remove 'test-results' on 'make clean'
|
|
Portability fix.
* vd/scalar-generalize-diagnose:
builtin/diagnose.c: don't translate the two mode values
diagnose.c: refactor to safely use 'd_type'
|
|
Typofix for topic already in -rc0.
* fz/help-doublofix:
help: fix doubled words in explanation for developer interfaces
|
|
The 't/test-results' directory and its contents are by-products of the
test process, so 'make clean' should remove them, but, alas, this has
been broken since fee65b194d (t/Makefile: don't remove test-results in
"clean-except-prove-cache", 2022-07-28).
The 'clean' target in 't/Makefile' was not directly responsible for
removing the 'test-results' directory, but relied on its dependency
'clean-except-prove-cache' to do that [1]. ee65b194d broke this,
because it only removed the 'rm -r test-results' command from the
'clean-except-prove-cache' target instead of moving it to the 'clean'
target, resulting in stray 't/test-results' directories.
Add that missing cleanup command to 't/Makefile', and to all
sub-Makefiles touched by that commit as well.
[1] 60f26f6348 (t/Makefile: retain cache t/.prove across prove runs,
2012-05-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* ad/t1800-cygwin:
t1800: correct test to handle Cygwin
|
|
Hoist the remainder of "scalar" out of contrib/ to the main part of
the codebase.
* vd/scalar-to-main:
Documentation/technical: include Scalar technical doc
t/perf: add 'GIT_PERF_USE_SCALAR' run option
t/perf: add Scalar performance tests
scalar-clone: add test coverage
scalar: add to 'git help -a' command list
scalar: implement the `help` subcommand
git help: special-case `scalar`
scalar: include in standard Git build & installation
scalar: fix command documentation section header
|
|
Revamp chainlint script for our tests.
* es/chainlint:
chainlint: colorize problem annotations and test delimiters
t: retire unused chainlint.sed
t/Makefile: teach `make test` and `make prove` to run chainlint.pl
test-lib: replace chainlint.sed with chainlint.pl
test-lib: retire "lint harder" optimization hack
t/chainlint: add more chainlint.pl self-tests
chainlint.pl: allow `|| echo` to signal failure upstream of a pipe
chainlint.pl: complain about loops lacking explicit failure handling
chainlint.pl: don't flag broken &&-chain if failure indicated explicitly
chainlint.pl: don't flag broken &&-chain if `$?` handled explicitly
chainlint.pl: don't require `&` background command to end with `&&`
t/Makefile: apply chainlint.pl to existing self-tests
chainlint.pl: don't require `return|exit|continue` to end with `&&`
chainlint.pl: validate test scripts in parallel
chainlint.pl: add parser to identify test definitions
chainlint.pl: add parser to validate tests
chainlint.pl: add POSIX shell parser
chainlint.pl: add POSIX shell lexical analyzer
t: add skeleton chainlint.pl
|
|
"git mv A B" in a sparsely populated working tree can be asked to
move a path from a directory that is "in cone" to another directory
that is "out of cone". Handling of such a case has been improved.
* sy/mv-out-of-cone:
builtin/mv.c: fix possible segfault in add_slash()
mv: check overwrite for in-to-out move
advice.h: add advise_on_moving_dirty_path()
mv: cleanup empty WORKING_DIRECTORY
mv: from in-cone to out-of-cone
mv: remove BOTH from enum update_mode
mv: check if <destination> is a SKIP_WORKTREE_DIR
mv: free the with_slash in check_dir_in_index()
mv: rename check_dir_in_index() to empty_dir_has_sparse_contents()
t7002: add tests for moving from in-cone to out-of-cone
|
|
Refactor usage of the 'd_type' property of 'struct dirent' in 'diagnose.c'
to instead utilize the compatibility macro 'DTYPE()'. On systems where
'd_type' is not present in 'struct dirent', this macro will always return
'DT_UNKNOWN'. In that case, instead fall back on using the 'stat.st_mode' to
determine whether the dirent points to a dir, file, or link.
Additionally, add a test to 't0092-diagnose.sh' to verify that files (e.g.,
loose objects) are counted properly.
Note that the new function 'get_dtype()' is based on 'resolve_dtype()' in
'dir.c' (which itself was refactored from a prior 'get_dtype()' in
ad6f2157f9 (dir: restructure in a way to avoid passing around a struct
dirent, 2020-01-16)), but differs in that it is meant for use on arbitrary
files, such as those inside the '.git' dir. Because of this, it does not
search the index for a matching entry to derive the 'd_type'.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" over protocol v2 sent an incorrect ref prefix request
to the server and made "git pull" with configured fetch refspec
that does not cover the remote branch to merge with fail, which has
been corrected.
* jk/proto-v2-ref-prefix-fix:
fetch: add branch.*.merge to default ref-prefix extension
fetch: stop checking for NULL transport->remote in do_fetch()
|
|
Fix a few "git log --remerge-diff" bugs.
* en/remerge-diff-fixes:
diff: fix filtering of merge commits under --remerge-diff
diff: fix filtering of additional headers under --remerge-diff
diff: have submodule_format logic avoid additional diff headers
|
|
On Cygwin, when failing to spawn a process using start_command, Git
outputs the same error as on Linux systems, rather than using the
GIT_WINDOWS_NATIVE-specific error output. The WINDOWS test prerequisite
is set in both Cygwin and native Windows environments, which means it's
not appropriate to use to anticipate the error output from
start_command. Instead, use the MINGW test prerequisite, which is only
set for Git in native Windows environments, and not for Cygwin.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plugging leaks in submodule--helper.
* ab/submodule-helper-leakfix:
submodule--helper: fix a configure_added_submodule() leak
submodule--helper: free rest of "displaypath" in "struct update_data"
submodule--helper: free some "displaypath" in "struct update_data"
submodule--helper: fix a memory leak in print_status()
submodule--helper: fix a leak in module_add()
submodule--helper: fix obscure leak in module_add()
submodule--helper: fix "reference" leak
submodule--helper: fix a memory leak in get_default_remote_submodule()
submodule--helper: fix a leak with repo_clear()
submodule--helper: fix "sm_path" and other "module_cb_list" leaks
submodule--helper: fix "errmsg_str" memory leak
submodule--helper: add and use *_release() functions
submodule--helper: don't leak {run,capture}_command() cp.dir argument
submodule--helper: "struct pathspec" memory leak in module_update()
submodule--helper: fix most "struct pathspec" memory leaks
submodule--helper: fix trivial get_default_remote_submodule() leak
submodule--helper: fix a leak in "clone_submodule"
|
|
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
|
|
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
|
|
The parser in the script interface to parse-options in "git
rev-parse" has been updated to diagnose a bogus input correctly.
* ow/rev-parse-parseopt-fix:
rev-parse --parseopt: detect missing opt-spec
|
|
More fixes to "add -p"
* js/builtin-add-p-portability-fix:
t6132(NO_PERL): do not run the scripted `add -p`
t3701: test the built-in `add -i` regardless of NO_PERL
add -p: avoid ambiguous signed/unsigned comparison
|
|
The codepath for the OPT_SUBCOMMAND facility has been cleaned up.
* sg/parse-options-subcommand:
notes, remote: show unknown subcommands between `'
notes: simplify default operation mode arguments check
test-parse-options.c: fix style of comparison with zero
test-parse-options.c: don't use for loop initial declaration
t0040-parse-options: remove leftover debugging
|
|
"git rev-list --verify-objects" ought to inspect the contents of
objects and notice corrupted ones, but it didn't when the commit
graph is in use, which has been corrected.
* jk/rev-list-verify-objects-fix:
rev-list: disable commit graph with --verify-objects
lookup_commit_in_graph(): use prepare_commit_graph() to check for graph
|
|
The server side that responds to "git fetch" and "git clone"
request has been optimized by allowing it to send objects in its
object store without recomputing and validating the object names.
* jk/upload-pack-skip-hash-check:
t1060: check partial clone of misnamed blob
parse_object(): check commit-graph when skip_hash set
upload-pack: skip parse-object re-hashing of "want" objects
parse_object(): allow skipping hash check
|
|
Code clean-up of "git submodule--helper".
* ab/submodule-helper-prep: (33 commits)
submodule--helper: fix bad config API usage
submodule--helper: libify even more "die" paths for module_update()
submodule--helper: libify more "die" paths for module_update()
submodule--helper: check repo{_submodule,}_init() return values
submodule--helper: libify "must_die_on_failure" code paths (for die)
submodule--helper update: don't override 'checkout' exit code
submodule--helper: libify "must_die_on_failure" code paths
submodule--helper: libify determine_submodule_update_strategy()
submodule--helper: don't exit() on failure, return
submodule--helper: use "code" in run_update_command()
submodule API: don't handle SM_..{UNSPECIFIED,COMMAND} in to_string()
submodule--helper: don't call submodule_strategy_to_string() in BUG()
submodule--helper: add missing braces to "else" arm
submodule--helper: return "ret", not "1" from update_submodule()
submodule--helper: rename "int res" to "int ret"
submodule--helper: don't redundantly check "else if (res)"
submodule--helper: refactor "errmsg_str" to be a "struct strbuf"
submodule--helper: add "const" to passed "struct update_data"
submodule--helper: add "const" to copy of "update_data"
submodule--helper: add "const" to passed "module_clone_data"
...
|
|
When `chainlint.pl` detects problems in a test definition, it emits the
test definition with "?!FOO?!" annotations highlighting the problems it
discovered. For instance, given this problematic test:
test_expect_success 'discombobulate frobnitz' '
git frob babble &&
(echo balderdash; echo gnabgib) >expect &&
for i in three two one
do
git nitfol $i
done >actual
test_cmp expect actual
'
chainlint.pl will output:
# chainlint: t1234-confusing.sh
# chainlint: discombobulate frobnitz
git frob babble &&
(echo balderdash ; ?!AMP?! echo gnabgib) >expect &&
for i in three two one
do
git nitfol $i ?!LOOP?!
done >actual ?!AMP?!
test_cmp expect actual
in which it may be difficult to spot the "?!FOO?!" annotations. The
problem is compounded when multiple tests, possibly in multiple
scripts, fail "linting", in which case it may be difficult to spot the
"# chainlint:" lines which delimit one problematic test from another.
To ameliorate this potential problem, colorize the "?!FOO?!" annotations
in order to quickly draw the test author's attention to the problem
spots, and colorize the "# chainlint:" lines to help the author identify
the name of each script and each problematic test.
Colorization is disabled automatically if output is not directed to a
terminal or if NO_COLOR environment variable is set. The implementation
is specific to Unix (it employs `tput` if available) but works equally
well in the Git for Windows development environment which emulates Unix
sufficiently.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Segfault fix-up to an earlier fix to the topic to teach "git reset"
and "git checkout" work better in a sparse checkout.
* vd/sparse-reset-checkout-fixes:
unpack-trees: fix sparse directory recursion check
|
|
"git format-patch --from=<ident>" can be told to add an in-body
"From:" line even for commits that are authored by the given
<ident> with "--force-in-body-from"option.
* jc/format-patch-force-in-body-from:
format-patch: learn format.forceInBodyFrom configuration variable
format-patch: allow forcing the use of in-body From: header
pretty: separate out the logic to decide the use of in-body from
|
|
Allow passing a pathspec to "git range-diff".
* js/range-diff-with-pathspec:
range-diff: optionally accept pathspecs
range-diff: consistently validate the arguments
range-diff: reorder argument handling
|
|
Those who use diff-so-fancy as the diff-filter noticed a regression
or two in the code that parses the diff output in the built-in
version of "add -p", which has been corrected.
* js/add-p-diff-parsing-fix:
add -p: ignore dirty submodules
add -p: gracefully handle unparseable hunk headers in colored diffs
add -p: detect more mismatches between plain vs colored diffs
|
|
After 2d893dff4c (rev-parse --parseopt: allow [*=?!] in argument hints,
2015-07-14) updated the parser, a line in parseopts's input can start
with one of the flag characters and be erroneously parsed as a opt-spec
where the short name of the option is the flag character itself and the
long name is after the end of the string. This makes Git want to
allocate SIZE_MAX bytes of memory at this line:
o->long_name = xmemdupz(sb.buf + 2, s - sb.buf - 2);
Since s and sb.buf are equal the second argument is -2 (except unsigned)
and xmemdupz allocates len + 1 bytes, ie. -1 meaning SIZE_MAX.
Avoid this by checking whether a flag character was found in the zeroth
position.
Reported-by: Ingy dot Net <ingy@ingy.net>
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "git pull" with no arguments, we'll do a default "git
fetch" and then try to merge the branch specified by the branch.*.merge
config. There's code in get_ref_map() to treat that "merge" branch as
something we want to fetch, even if it is not otherwise covered by the
default refspec.
This works fine with the v0 protocol, as the server tells us about all
of the refs, and get_ref_map() is the ultimate decider of what we fetch.
But in the v2 protocol, we send the ref-prefix extension to the server,
asking it to limit the ref advertisement. And we only tell it about the
default refspec for the remote; we don't mention the branch.*.merge
config at all.
This usually doesn't matter, because the default refspec matches
"refs/heads/*", which covers all branches. But if you explicitly use a
narrow refspec, then "git pull" on some branches may fail. The server
doesn't advertise the branch, so we don't fetch it, and "git pull"
thinks that it went away upstream.
We can fix this by including any branch.*.merge entries for the current
branch in the list of ref-prefixes we pass to the server. This only
needs to happen when using the default configured refspec (since
command-line refspecs are already added, and take precedence in deciding
what we fetch). We don't otherwise need to replicate any of the "what to
fetch" logic in get_ref_map(). These ref-prefixes are an optimization,
so it's OK if we tell the server to advertise the branch.*.merge ref,
even if we're not going to pull it. We'll just choose not to fetch it.
The test here is based on one constructed by Johannes. I modified the
branch names to trigger the ref-prefix issue (and be more descriptive),
and to confirm that "git pull" actually updated the local ref, which
should be more robust than just checking stderr.
Reported-by: Lana Deere <lana.deere@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent commit (upload-pack: skip parse-object re-hashing of "want"
objects, 2022-09-06) loosened the behavior of upload-pack so that it
does not verify the sha1 of objects it receives directly via "want"
requests. The existing corruption tests in t1060 aren't affected by
this: the corruptions are blobs reachable from commits, and the client
requests the commits.
The more interesting case here is a partial clone, where the client will
directly ask for the corrupted blob when it does an on-demand fetch of
the filtered object. And that is not covered at all, so let's add a
test.
It's important here that we use the "misnamed" corruption and not
"bit-error". The latter is sufficiently corrupted that upload-pack
cannot even figure out the type of the object, so it bails identically
both before and after the recent change. But with "misnamed", with the
hash-checks enabled it sees the problem (though the error messages are a
bit confusing because of the inability to create a "struct object" to
store the flags):
error: hash mismatch d95f3ad14dee633a758d2e331151e950dd13e4ed
fatal: git upload-pack: not our ref d95f3ad14dee633a758d2e331151e950dd13e4ed
fatal: remote error: upload-pack: not our ref d95f3ad14dee633a758d2e331151e950dd13e4ed
After the change to skip the hash check, the server side happily sends
the bogus object, but the client correctly realizes that it did not get
the necessary data:
remote: Enumerating objects: 1, done.
remote: Counting objects: 100% (1/1), done.
remote: Total 1 (delta 0), reused 0 (delta 0), pack-reused 0
Receiving objects: 100% (1/1), 49 bytes | 49.00 KiB/s, done.
fatal: bad revision 'd95f3ad14dee633a758d2e331151e950dd13e4ed'
error: [...]/misnamed did not send all necessary objects
which is exactly what we expect to happen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Imagine we have a history with commit C pointing to a large blob B.
If a client asks us for C, we can generally serve both objects to them
without accessing the uncompressed contents of B. In upload-pack, we
figure out which commits we have and what the client has, and feed those
tips to pack-objects. In pack-objects, we traverse the commits and trees
(or use bitmaps!) to find the set of objects needed, but we never open
up B. When we serve it to the client, we can often pass the compressed
bytes directly from the on-disk packfile over the wire.
But if a client asks us directly for B, perhaps because they are doing
an on-demand fetch to fill in the missing blob of a partial clone, we
end up much slower. Upload-pack calls parse_object() on the oid we
receive, which opens up the object and re-checks its hash (even though
if it were a commit, we might skip this parse entirely in favor of the
commit graph!). And then we feed the oid directly to pack-objects, which
again calls parse_object() and opens the object. And then finally, when
we write out the result, we may send bytes straight from disk, but only
after having unnecessarily uncompressed and computed the sha1 of the
object twice!
This patch teaches both code paths to use the new SKIP_HASH_CHECK flag
for parse_object(). You can see the speed-up in p5600, which does a
blob:none clone followed by a checkout. The savings for git.git are
modest:
Test HEAD^ HEAD
----------------------------------------------------------------------
5600.3: checkout of result 2.23(4.19+0.24) 1.72(3.79+0.18) -22.9%
But the savings scale with the number of bytes. So on a repository like
linux.git with more files, we see more improvement (in both absolute and
relative numbers):
Test HEAD^ HEAD
----------------------------------------------------------------------------
5600.3: checkout of result 51.62(77.26+2.76) 34.86(61.41+2.63) -32.5%
And here's an even more extreme case. This is the android gradle-plugin
repository, whose tip checkout has ~3.7GB of files:
Test HEAD^ HEAD
--------------------------------------------------------------------------
5600.3: checkout of result 79.51(90.84+5.55) 40.28(51.88+5.67) -49.3%
Keep in mind that these timings are of the whole checkout operation. So
they count the client indexing the pack and actually writing out the
files. If we want to see just the server's view, we can hack up the
GIT_TRACE_PACKET output from those operations and replay it via
upload-pack. For the gradle example, that gives me:
Benchmark 1: GIT_PROTOCOL=version=2 git.old upload-pack ../gradle-plugin <input
Time (mean ± σ): 50.884 s ± 0.239 s [User: 51.450 s, System: 1.726 s]
Range (min … max): 50.608 s … 51.025 s 3 runs
Benchmark 2: GIT_PROTOCOL=version=2 git.new upload-pack ../gradle-plugin <input
Time (mean ± σ): 9.728 s ± 0.112 s [User: 10.466 s, System: 1.535 s]
Range (min … max): 9.618 s … 9.842 s 3 runs
Summary
'GIT_PROTOCOL=version=2 git.new upload-pack ../gradle-plugin <input' ran
5.23 ± 0.07 times faster than 'GIT_PROTOCOL=version=2 git.old upload-pack ../gradle-plugin <input'
So a server would see an 80% reduction in CPU serving the initial
checkout of a partial clone for this repository. Or possibly even more
depending on the packing; most of the time spent in the faster one were
objects we had to open during the write phase.
In both cases skipping the extra hashing on the server should be pretty
safe. The client doesn't trust the server anyway, so it will re-hash all
of the objects via index-pack. There is one thing to note, though: the
change in get_reference() affects not just pack-objects, but rev-list,
git-log, etc. We could use a flag to limit to index-pack here, but we
may already skip hash checks in this instance. For commits, we'd skip
anything we load via the commit-graph. And while before this commit we
would check a blob fed directly to rev-list on the command-line, we'd
skip checking that same blob if we found it by traversing a tree.
The exception for both is if --verify-objects is used. In that case,
we'll skip this optimization, and the new test makes sure we do this
correctly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The preferred style is '!argc' instead of 'argc == 0'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We would like to eventually use for loop initial declarations in our
codebase, but we are not there yet.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the point of --verify-objects is to actually load and checksum the
bytes of each object, optimizing out reads using the commit graph runs
contrary to our goal.
The most targeted way to implement this would be for the revision
traversal code to check revs->verify_objects and avoid using the commit
graph. But it's difficult to be sure we've hit all of the correct spots.
For instance, I started this patch by writing the first of the included
test cases, where the corrupted commit is directly on rev-list's command
line. And that is easy to fix by teaching get_reference() to check
revs->verify_objects before calling lookup_commit_in_graph().
But that doesn't cover the second test case: when we traverse to a
corrupted commit, we'd parse the parent in process_parents(). So we'd
need to check there, too. And it keeps going. In handle_commit() we
sometimes parses commits, too, though I couldn't figure out a way to
trigger it that did not already parse via get_reference() or tag
peeling. And try_to_simplify_commit() has its own parse call, and so on.
So it seems like the safest thing is to just disable the commit graph
for the whole process when we see the --verify-objects option. We can do
that either in builtin/rev-list.c, where we use the option, or in
revision.c, where we parse it. There are some subtleties:
- putting it in rev-list.c is less surprising in some ways, because
there we know we are just doing a single traversal. In a command
which does multiple traversals in a single process, it's rather
unexpected to globally disable the commit graph.
- putting it in revision.c is less surprising in some ways, because
the caller does not have to remember to disable the graph
themselves. But this is already tricky! The verify_objects flag in
rev_info doesn't do anything by itself. The caller has to provide an
object callback which does the right thing.
- for that reason, in practice nobody but rev-list uses this option in
the first place. So the distinction is probably not important either
way. Arguably it should just be an option of rev-list, and not the
general revision machinery; right now you can run "git log
--verify-objects", but it does not actually do anything useful.
- checking for a parsed revs.verify_objects flag in rev-list.c is too
late. By that time we've already passed the arguments to
setup_revisions(), which will have parsed the commits using the
graph.
So this commit disables the graph as soon as we see the option in
revision.c. That's a pretty broad hammer, but it does what we want, and
in practice nobody but rev-list is using this flag anyway.
The tests cover both the "tip" and "parent" cases. Obviously our hammer
hits them both in this case, but it's good to check both in case
somebody later tries the more focused approach.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test helper fix.
* jk/test-crontab-fixes:
test-crontab: minor memory and error handling fixes
|
|
Test clean-up.
* en/test-without-test-create-repo:
t64xx: convert 'test_create_repo' to 'git init'
|
|
FreeBSD portability fix for "git maintenance" that spawns "crontab"
to schedule tasks.
* bc/gc-crontab-fix:
gc: use temporary file for editing crontab
|
|
Test clean-up.
* es/t4301-sed-portability-fix:
t4301: emit blank line in more idiomatic fashion
t4301: fix broken &&-chains and add missing loop termination
t4301: account for behavior differences between sed implementations
|
|
Optimization of a test-helper command.
* rs/test-mergesort:
test-mergesort: use mem_pool for sort input
test-mergesort: read sort input all at once
|
|
The pack bitmap file gained a bitmap-lookup table to speed up
locating the necessary bitmap for a given commit.
* ac/bitmap-lookup-table:
pack-bitmap-write: drop unused pack_idx_entry parameters
bitmap-lookup-table: add performance tests for lookup table
pack-bitmap: prepare to read lookup table extension
pack-bitmap-write: learn pack.writeBitmapLookupTable and add tests
pack-bitmap-write.c: write lookup table extension
bitmap: move `get commit positions` code to `bitmap_writer_finish`
Documentation/technical: describe bitmap lookup table extension
|
|
Multi-pack index got corrupted when preferred pack changed from one
pack to another in a certain way, which has been corrected.
* tb/midx-with-changing-preferred-pack-fix:
midx.c: avoid adding preferred objects twice
midx.c: include preferred pack correctly with existing MIDX
midx.c: extract `midx_fanout_add_pack_fanout()`
midx.c: extract `midx_fanout_add_midx_fanout()`
midx.c: extract `struct midx_fanout`
t/lib-bitmap.sh: avoid silencing stderr
t5326: demonstrate potential bitmap corruption
|
|
Add a 'GIT_PERF_USE_SCALAR' environment variable (and corresponding perf
config 'useScalar') to register a repository created with any of:
* test_perf_fresh_repo
* test_perf_default_repo
* test_perf_large_repo
as a Scalar enlistment. This is intended to allow a developer to test the
impact of Scalar on already-defined performance scenarios.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create 'p9210-scalar.sh' for testing Scalar performance and comparing
performance of Git operations in Scalar registrations and standard
repositories. Example results:
Test this tree
------------------------------------------------------------------------
9210.2: scalar clone 14.82(18.00+3.63)
9210.3: git clone 26.15(36.67+6.90)
9210.4: git status (scalar) 0.04(0.01+0.01)
9210.5: git status (non-scalar) 0.10(0.02+0.11)
9210.6: test_commit --append --no-tag A (scalar) 0.08(0.02+0.03)
9210.7: test_commit --append --no-tag A (non-scalar) 0.13(0.03+0.11)
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new test file ('t9211-scalar-clone.sh') to exercise the options and
behavior of the 'scalar clone' command. Each test clones to a unique target
location and cleans up the cloned repo only when the test passes. This
ensures that failed tests' artifacts are captured in CI artifacts for
further debugging.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move 'scalar' out of 'contrib/' and into the root of the Git tree. The goal
of this change is to build 'scalar' as part of the standard Git build &
install processes.
This patch includes both the physical move of Scalar's files out of
'contrib/' ('scalar.c', 'scalar.txt', and 't9xxx-scalar.sh'), and the
changes to the build definitions in 'Makefile' and 'CMakelists.txt' to
accommodate the new program.
At a high level, Scalar is built so that:
- there is a 'scalar-objs' target (similar to those created in 029bac01a8
(Makefile: add {program,xdiff,test,git,fuzz}-objs & objects targets,
2021-02-23)) for debugging purposes.
- it appears in the root of the install directory (rather than the
gitexecdir).
- it is included in the 'bin-wrappers/' directory for use in tests.
- it receives a platform-specific executable suffix (e.g., '.exe'), if
applicable.
- 'scalar.txt' is installed as 'man1' documentation.
- the 'clean' target removes the 'scalar' executable.
Additionally, update the root level '.gitignore' file to ignore the Scalar
executable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ensure 'is_sparse_directory_entry()' receives a valid 'name_entry *' if one
exists in the list of tree(s) being unpacked in 'unpack_callback()'.
Currently, 'is_sparse_directory_entry()' is called with the first
'name_entry' in the 'names' list of entries on 'unpack_callback()'. However,
this entry may be empty even when other elements of 'names' are not (such as
when switching from an orphan branch back to a "normal" branch). As a
result, 'is_sparse_directory_entry()' could incorrectly indicate that a
sparse directory is *not* actually sparse because the name of the index
entry does not match the (empty) 'name_entry' path.
Fix the issue by using the existing 'name_entry *p' value in
'unpack_callback()', which points to the first non-empty entry in 'names'.
Because 'p' is 'const', also update 'is_sparse_directory_entry()'s
'name_entry *' argument to be 'const'.
Finally, add a regression test case.
Reported-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 95433eeed9 ("diff: add ability to insert additional headers for
paths", 2022-02-02) introduced the possibility of additional headers.
Because there could be conflicts with no content differences (e.g. a
modify/delete conflict resolved in favor of taking the modified file
as-is), that commit also modified the diff_queue_is_empty() and
diff_flush_patch() logic to ensure these headers were included even if
there was no associated content diff.
However, the added logic was a bit inconsistent between these two
functions. diff_queue_is_empty() overlooked the fact that the
additional headers strmap could be non-NULL and empty, which would cause
it to display commits that should have been filtered out.
Fix the diff_queue_is_empty() logic to also account for
additional_path_headers being empty.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
