| Age | Commit message (Collapse) | Author |
|---|
|
Add a --long-tests option to test-lib.sh, which enables tests to
selectively run more exhaustive (longer running, potentially
brute-force) tests. Such exhaustive tests would only be useful if one
works on the specific module that is being tested -- for a general "cd
t/; make" to check whether everything is OK, such exhaustive tests
shouldn't be run by default since the longer it takes to run the
tests, the less often they are actually run.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
...also in comments.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/attr:
Ignore .gitattributes in bare repositories
|
|
Improve the git-svn-author test to check that extra newlines aren't inserted
into commit messages as they take a round trip from git to svn and back.
We test both with and without the --add-author-from option to git-svn.
git-svn: test that svn repo doesn't have extra newlines.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test did "reset --hard" (where the HEAD commit has an empty
blob at path "empty") followed by "> empty", expecting that
the index does not notice the file _changed_ since git wrote
it out upon "reset" if the redirection is done quickly enough.
There was no need to do the emptying, and it gave a wrong result
if "reset --hard" happened on time T and then ">empty" happened on
the next second T+1. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* om/remote-fix:
"remote prune": be quiet when there is nothing to prune
remote show: list tracked remote branches with -n
remote prune: print the list of pruned branches
builtin-remote: split show_or_prune() in two separate functions
remote show: fix the -n option
|
|
Only ignore whitespace errors in t/tNNNN-*.sh and the t/tNNNN
subdirectories. Other files (like test libraries) should still be
checked.
Also fix a whitespace error in t/test-lib.sh.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/merge-recursive:
merge-recursive: respect core.autocrlf when writing out the result
Add testcase for merging in a CRLF repo
|
|
The code forgot to convert the blob contents into work tree
representation before writing it out. Also fixes leaks -- earlier
the updated blobs were never freed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you work on a repo with core.autocrlf == true, you would expect
every text file to have CRLF EOLs. However, if you by some operation,
get a conflict, then the conflicted file has LF EOLs.
Now, of course you'd go about resolving the files conflict, and then 'git
add <file>'. When you do that, you'll get the warning saying that LF will
be replaced by CRLF. Then you commit. The end result is that you have a
workingdir with a mix of LF and CRLF files, which after some more
operations may trigger a "whole file changed" diff, due to the workingdir
file now having LF EOLs.
An LF only conflict file results in the resolved file being in LF,
the commit is in LF and a warning saying that LF will be replaced
by CRLF, and the working dir ends up with a mix of CRLF and LF files.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, cat-file --batch / --batch-check would silently exit if it
was passed a non-existent SHA1 on stdin. Now it prints "<SHA1>
missing" as in all other cases (and as advertised in the
documentation).
Note that cat-file --batch-check (but not --batch) will still output
"error: unable to find <SHA1>" on stderr if a non-existent SHA1 is
passed, but this does not affect parsing its stdout.
Also, type <= 0 was previously using the potentially uninitialized
type variable (relying on it being 0); it is now being initialized.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously timestamps were removed unconditionally (though this didn't
seem to break this test). Now they are only removed if $no_ts is
non-empty.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
describe: match pattern for lightweight tags too
|
|
The <pattern> given "git describe --match" was used only to filter tag
objects, and not to filter lightweight tags. This fixes it.
[jc: made the log to clarify this is a bugfix, not an enhancement, with
additional test]
Signed-off-by: Michael Dressel <MichaelTiloDressel@t-online.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The double slashes "//" result from url./$TRASH/. expansion and the
current directory, which even in cygwin contains "/" as first
character. In cygwin such strings have special meaning: UNC path.
Accessing an UNC path built for test purpose usually fails.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We would like to catch breakage at any step in the sequence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One particular test wants to check the behaviour of the command
when these variables are not set, but the later tests should have
the reliable committer identity for repeatable tests.
Move the "unset" of the variables inside a subshell in the test
that wants to unset them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted version of git-commit internally used git-commit-tree which
omitted duplicated parents given from the command line. This prevented a
nonsensical octopus merge from getting created even when you said "git
merge A B" while you are already on branch A.
However, when git-commit was rewritten in C, this sanity check was lost.
This resurrects it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/am-tests:
Merge t4150-am-subdir.sh and t4151-am.sh into t4150-am.sh
Add test cases for git-am
|
|
* lw/test-fix:
t/test-lib.sh: resolve symlinks in working directory, for pathname comparisons
|
|
* sp/remote:
Make "git-remote rm" delete refs acccording to fetch specs
Make "git-remote prune" delete refs according to fetch specs
Remove unused remote_prefix member in builtin-remote
|
|
* lr/init-bare:
git-init: accept --bare option
|
|
A remote may be configured to fetch into tracking branches that
do not match the remote name. For example a user may have created
extra remotes that will fetch to the same tracking branch namespace,
but from different URLs:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/*:refs/remotes/origin/*
[remote "alt"]
url = git://repo.or.cz/alt-git.git
fetch = refs/heads/*:refs/remotes/origin/*
When running `git remote prune alt` we expect stale branches to
be removed from "refs/remotes/origin/*" and not from the unused
namespace of "refs/remotes/alt/*".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this, some tests will fail because they compare command output
of subprocesses (such as git) with $PWD -- but subprocesses have the
physical path as their working directory, whereas $PWD contains the
symlinked path. This fixes it.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch moves the am test cases in t4150-am.sh and the
am subdirectory test cases from t/t4150-am-subdir.sh into
t/4151-am.sh.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add t/t4151-am.sh that does basic testing of git-am functionality,
including:
* am applies patch correctly
* am changes committer and keeps author
* am --signoff adds Signed-off-by: line
* am stays in branch
* am --signoff does not add Signed-off-by: line if already there
* am without --keep removes Re: and [PATCH] stuff
* am --keep really keeps the subject
* am -3 falls back to 3-way merge
* am pauses on conflict
* am --skip works
* am --resolved works
* am takes patches from a Pine mailbox
* am fails on mail without patch
* am fails on empty patch
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Other signals are also common, for example SIGTERM and SIGHUP.
This patch modifies the lock file mechanism to catch more signals.
It also modifies http-push.c which was missing SIGTERM.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is unfortunate that "git init --bare" does not work and the only reason
why "init" did not learn its own "--bare" option is because "git --bare
init" already does the job (and as an option to the git 'potty', it is
more generic solution).
This teaches "git init" its own "--bare" option, so that both "git --bare init"
and "git init --bare" works mostly the same way.
[jc: rewrote the log message and added test]
Signed-off-by: Luciano Rocha <strange@nsk.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sync with builtin-fetch--tool.c where append_fetch_head()
honors update_local_ref() return value.
This fixes non fast forward fetch exit status,
http://bugzilla.altlinux.org/show_bug.cgi?id=15037
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are broken filesystems that cannot have a file whose name is "nul"
anywhere on it. Rename the test file to make ourselves more portable.
Noticed by Mark Levedahl.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
This reverts commit cfabd6eee1745cfec58cfcb794ce8847e43b888a. I had
implemented it without understanding what --full-history does. Consider
this history:
C--M--N
/ / /
A--B /
\ /
D-/
where B and C modify a path, X, in the same way so that the result is
identical, and D does not modify it at all. With the path limiter X and
without --full-history this is simplified to
A--B
i.e. only one of the paths via B or C is chosen. I had assumed that
--full-history would keep both paths like this
C--M
/ /
A--B
removing the path via D; but in fact it keeps the entire history.
Currently, git does not have the capability to simplify to this
intermediary case. However, the other extreme to keep the entire history
is not wanted either in usual cases. I think we can expect that histories
like the above are rare, and in the usual cases we want a simplified
history. So let's remove --full-history again.
(Concerning t7003, subsequent tests depend on what the test case sets up,
so we can't just back out the entire test case.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "trash directory" bites again.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
|
|
* gp/bisect-fix:
bisect: print an error message when "git rev-list --bisect-vars" fails
git-bisect.sh: don't accidentally override existing branch "bisect"
|
|
* js/mailinfo:
mailsplit: minor clean-up in read_line_with_nul()
mailinfo: apply the same fix not to lose NULs in BASE64 and QP codepaths
mailsplit and mailinfo: gracefully handle NUL characters
|
|
* jc/add-n-u:
Make git add -n and git -u -n output consistent
"git-add -n -u" should not add but just report
Conflicts:
builtin-add.c
builtin-mv.c
cache.h
read-cache.c
|
|
* ar/t6031:
Fix t6031 on filesystems without working exec bit
|
|
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
|
|
* jc/apply-whitespace:
builtin-apply: do not declare patch is creation when we do not know it
builtin-apply: accept patch to an empty file
builtin-apply: typofix
|
|
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
|
|
* cc/bisect:
bisect: use a detached HEAD to bisect
bisect: trap critical errors in "bisect_start"
bisect: fix left over "BISECT_START" file when starting with junk rev
bisect: add test cases to check that "git bisect start" is atomic
|
