| Age | Commit message (Collapse) | Author |
|---|
|
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bg/fix-t7003:
t7003: Use test_commit instead of custom function
|
|
* dr/maint-ls-tree-prefix-recursion-fix:
ls-tree $di $dir: do not mistakenly recurse into directories
|
|
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
|
|
* ch/filter-branch-deprecate-remap-to-ancestor:
filter-branch: retire --remap-to-ancestor
|
|
* ch/maint-cannot-create-bundle-error:
bundle: detect if bundle file cannot be created
|
|
* ks/recursive-rename-add-identical:
RE: [PATCH] Avoid rename/add conflict when contents are identical
|
|
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t3101: modernise style
compat/nedmalloc: don't force NDEBUG on the rest of git
Conflicts:
Makefile
|
|
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also add a few " &&" cascade that were missing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously (e3bf5e43), a test was added to test whether the builtin
xfuncname regular expressions could be compiled without error by regcomp.
Let's do the same for the word_regex patterns. This should help catch any
cross-platform incompatibilities that exist between the pattern creator's
system and the various platforms that the test suite is commonly run on.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 6106ce46 introduced a test to demonstrate fetch's failure to
retrieve any objects or update FETCH_HEAD when it was supplied a repository
URL and the current branch had a configured merge spec. This commit
expands the original test based on comments from Junio Hamano. In addition
to actually verifying that the fetch updates FETCH_HEAD correctly, and does
not update the current branch, two more tests are added to ensure that the
merge configuration is ignored even when the supplied URL matches the URL
of the remote configured for the branch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On IRIX 6.5, the printf utility in /usr/bin does not appear to handle the
\ddd notation according to POSIX. This printf appears to halt processing
of the string argument and ignore any additional characters in the string.
Work around this flaw by replacing the \000's with 'Q' and using the
q_to_nul helper function provided by test-lib.sh
This problem with printf is not apparent when using the Bash shell since
Bash implements a POSIX compatible printf function internally.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To achieve that, all cd commands which weren't inside a subshell had to
be put into a new one.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although the set_state command is not likely to fail, it is best to
stay in the habit of checking for failures.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test is from 2007, which is late enough for the style to be
recognizably modern but still a while ago. Freshen it up to
follow new best practices:
- guard setup commands with test_expect_setup, so errors at
that stage can be caught;
- use <<\EOF in preference to <<EOF, to save reviewers the
trouble of looking for variable interpolations;
- use test_cmp instead of test "$foo" = "$bar", for better
output with -v on failure;
- indent commands in subshells and let them span multiple lines;
- combine the two "gitdir required mode" tests that do not make
as much sense alone.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure early failures are not masked by later successes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsck test is generally careful to remove the corrupt objects
it inserts, but dangling objects are left behind due to some typos
and omissions. It is better to clean up more completely, to
simplify the addition of later tests. So:
- guard setup and cleanup with test_expect_success to catch
typos and errors;
- check both stdout and stderr when checking for empty fsck
output;
- use test_cmp empty file in place of test $(wc -l <file) = 0,
for better debugging output when running tests with -v;
- add a remove_object () helper and use it to replace broken
object removal code that forgot about the fanout in
.git/objects;
- disable gc.auto, to avoid tripping up object removal if the
number of objects ever reaches that threshold.
- use test_when_finished to ensure cleanup tasks are run and
succeed when tests fail;
- add a new final test that no breakage or dangling objects
was left behind.
While at it, add a brief description to test_description of the
history that is expected to persist between tests.
Part of a campaign to clean up subshell usage in tests.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/test-must-fail-missing:
tests: make test_might_fail fail on missing commands
tests: make test_might_fail more verbose
tests: make test_must_fail fail on missing commands
tests: make test_must_fail more verbose
|
|
* jh/error-removing-missing-note:
notes: Don't create (empty) commit when removing non-existing notes
|
|
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
|
|
* jk/maint-pass-c-config-in-env:
do not pass "git -c foo=bar" params to transport helpers
pass "git -c foo=bar" params through environment
|
|
* jl/maint-fix-test:
Several tests: cd inside subshell instead of around
Conflicts:
t/t9600-cvsimport.sh
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
tag.c: whitespace breakages fix
Fix whitespace issue in object.c
t5505: add missing &&
|
|
* xx/trivial:
tag.c: whitespace breakages fix
Fix whitespace issue in object.c
t5505: add missing &&
|
|
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
|
|
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
|
|
* js/detached-stash:
t3903: fix broken test_must_fail calls
detached-stash: update Documentation
detached-stash: tests of git stash with stash-like arguments
detached-stash: simplify git stash show
detached-stash: simplify git stash branch
detached-stash: refactor git stash pop implementation
detached-stash: simplify stash_drop
detached-stash: simplify stash_apply
detached-stash: work around git rev-parse failure to detect bad log refs
detached-stash: introduce parse_flags_and_revs function
|
|
* js/maint-reflog-beyond-horizon:
t1503: fix broken test_must_fail calls
rev-parse: tests git rev-parse --verify master@{n}, for various n
sha1_name.c: use warning in preference to fprintf(stderr
rev-parse: exit with non-zero status if ref@{n} is not valid.
|
|
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
|
|
* nd/maint-fix-replace:
parse_object: pass on the original sha1, not the replaced one
|
|
Commit 0e87c36 (object: call "check_sha1_signature" with the
replacement sha1) changed the first argument passed to
parse_object_buffer() from "sha1" to "repl". With that change,
the returned obj pointer has the replacement SHA1 in obj->sha1,
not the original one.
But when using lookup_commit() and then parse_commit() on a
commit, we get an object pointer with the original sha1, but
the commit content comes from the replacement commit.
So the result we get from using parse_object() is different
from the we get from using lookup_commit() followed by
parse_commit().
It looks much simpler and safer to fix this inconsistency by
passing "sha1" to parse_object_bufer() instead of "repl".
The commit comment should be used to tell the the replacement
commit is replacing another commit and why. So it should be
easy to see that we have a replacement commit instead of an
original one.
And it is not a problem if the content of the commit is not
consistent with the sha1 as cat-file piped to hash-object can
be used to see the difference.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
>Due to this this (and maybe all the tests) need to depend on the
>SYMLINKS prereq.
Here's a third attempt with no use of symlinks in the test:
Skip the entire rename/add conflict case if the file added on the
other branch has the same contents as the file being renamed. This
avoids giving the user an extra copy of the same file and presenting a
conflict that is confusing and pointless.
A simple test of this case has been added in
t/t3030-merge-recursive.sh.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/compat-regex:
Fix compat/regex ANSIfication on MinGW
autoconf: regex library detection typofix
autoconf: don't use platform regex if it lacks REG_STARTEND
t/t7008-grep-binary.sh: un-TODO a test that needs REG_STARTEND
compat/regex: get rid of old-style definition
compat/regex: define out variables only used under RE_ENABLE_I18N
Change regerror() declaration from K&R style to ANSI C (C89)
compat/regex: get the gawk regex engine to compile within git
compat/regex: use the regex engine from gawk for compat
Conflicts:
compat/regex/regex.c
|
|
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
|
|
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
|
|
* jn/update-contrib-example-merge: (24 commits)
merge script: learn --[no-]rerere-autoupdate
merge script: notice @{-1} shorthand
merge script: handle --no-ff --no-commit correctly
merge script: --ff-only to disallow true merge
merge script: handle many-way octopus
merge script: handle -m --log correctly
merge script: forbid merge -s index
merge script: allow custom strategies
merge script: merge -X<option>
merge script: improve log message subject
merge script: refuse to merge during merge
merge script: tweak unmerged files message to match builtin
merge script: --squash, --ff from unborn branch are errors
fmt-merge-msg -m to override merge title
merge-base --independent to print reduced parent list in a merge
merge-base --octopus to mimic show-branch --merge-base
Documentation: add a SEE ALSO section for merge-base
t6200 (fmt-merge-msg): style nitpicks
t6010 (merge-base): modernize style
t7600 (merge): test merge from branch yet to be born
...
|
|
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
|
|
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if there
is an error in the subshell.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
