| Age | Commit message (Collapse) | Author |
|---|
|
"git rebase -i" with a series of squash/fixup, when one of the
steps stopped in conflicts and ended up getting skipped, did not
handle the accumulated commit log messages, which has been
corrected.
* pw/rebase-skip-commit-message-fix:
rebase --skip: fix commit message clean up when skipping squash
|
|
Exclude "." from the set of characters to be removed from the
beginning and the end of the human-readable name.
* bc/ident-dot-is-no-longer-crud-letter:
ident: don't consider '.' a crud
|
|
Code clean-up.
* rs/bundle-parseopt-cleanup:
bundle: use OPT_PASSTHRU_ARGV
|
|
Test updates.
* tb/commit-graph-tests:
t/lib-commit-graph.sh: avoid sub-shell in `graph_git_behavior()`
t5328: avoid top-level directory changes
t5318: avoid top-level directory changes
t/lib-commit-graph.sh: avoid directory change in `graph_git_behavior()`
t/lib-commit-graph.sh: allow `graph_read_expect()` in sub-directories
|
|
"git branch -f X" to repoint the branch X said that X was "checked
out" in another worktree, even when branch X was not and instead
being bisected or rebased. The message was reworded to say the
branch was "in use".
* jc/branch-in-use-error-message:
branch: update the message to refuse touching a branch in-use
|
|
"git blame --contents=file" has been taught to work in a bare
repository.
* hy/blame-in-bare-with-contents:
blame: allow --contents to work with bare repo
|
|
Command line parser fix, and a small parse-options API update.
* jc/parse-options-short-help:
short help: allow a gap smaller than USAGE_GAP
remote: simplify "remote add --tags" help text
short help: allow multi-line opthelp
|
|
Fix tests with unportable regex patterns.
* ja/worktree-orphan-fix:
t2400: rewrite regex to avoid unintentional PCRE
builtin/worktree.c: convert tab in advice to space
t2400: drop no-op `--sq` from rev-parse call
|
|
During a series of "fixup" and/or "squash" commands, the interactive
rebase accumulates a commit message from all the commits that are being
squashed together. If one of the commits has conflicts when it is picked
and the user chooses to skip that commit then we need to remove that
commit's message from accumulated messages. To do this 15ef69314d5
(rebase --skip: clean up commit message after a failed fixup/squash,
2018-04-27) updated commit_staged_changes() to reset the accumulated
message to the commit message of HEAD (which does not contain the
message from the skipped commit) when the last command was "fixup" or
"squash" and there are no staged changes. Unfortunately the code to do
this contains two bugs.
(1) If parse_head() fails we pass an invalid pointer to
unuse_commit_buffer().
(2) The reconstructed message uses the entire commit buffer from HEAD
including the headers, rather than just the commit message.
The first issue is fixed by splitting up the "if" condition into several
statements each with its own error handling. The second issue is fixed
by finding the start of the commit message within the commit buffer
using find_commit_subject().
The existing test added by 15ef69314d5 is modified to show the effect of
this bug. The bug is triggered when skipping the first command in the
chain (as the test does before this commit) but the effect is hidden
because opts->current_fixup_count is set to zero which leads
update_squash_messages() to recreate the squash message file from
scratch overwriting the bad message created by
commit_staged_changes(). The test is also updated to explicitly check
the commit messages rather than relying on grep to ensure they do not
contain any stray commit headers.
To check the commit message the function test_commit_message() is moved
from t3437-rebase-fixup-options.sh to test-lib.sh. As the function is
now publicly available it is updated to provide better error detection
and avoid overwriting the commonly used files "actual" and "expect".
Support for reading the expected commit message from stdin is also
added.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we process a user's name (as in user.name), we strip all
leading and trailing crud from it. Right now, we consider a dot
a crud character, and strip it off.
However, this is unsuitable for many personal names because humans
frequently have abbreviated suffixes, such as "Jr." or "Sr." at the end
of their names, and this corrupts them. Some other users may wish to
use an abbreviated name or initial, which will pose a problem especially
in cultures that write the family name first, followed by the personal
name.
Since the current approach causes lots of practical problems, let's
avoid it by no longer considering a dot to be crud.
Note that "." in the name forces the entire name to be quoted to
please mailers, but stripping "." only at the beginning and the end
does not help a name with "." in the middle (like "brian m. carlson")
so this change will not make it much worse. A name like "Given
Family, Jr." that did not have to be quoted now would need to be, in
order to be placed on the e-mail headers, though.
This is based on a weather-balloon patch by Jeff King sent in Aug 2021
https://lore.kernel.org/git/YSKm8Q8nyTavQaox@coredump.intra.peff.net/
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch --list --format=<format>" and friends are taught
a new "%(describe)" placeholder.
* ks/ref-filter-describe:
ref-filter: add new "describe" atom
ref-filter: add multiple-option parsing functions
|
|
When the user edits "rebase -i" todo file so that it starts with a
"fixup", which would make it invalid, the command truncated the
rest of the file before giving an error and returning the control
back to the user. Stop truncating to make it easier to correct
such a malformed todo file.
* ah/sequencer-rewrite-todo-fix:
sequencer: finish parsing the todo list despite an invalid first line
|
|
Instead of inventing a custom counter variables for debugging,
use existing trace2 facility in the fsync customization codepath.
* bb/use-trace2-counters-for-fsync-stats:
wrapper: use trace2 counters to collect fsync stats
|
|
"git bundle" passes the progress control options to "git pack-objects"
by parsing and then recreating them explicitly. Simplify that process
by using OPT_PASSTHRU_ARGV instead.
This also fixes --no-quiet, which has been doing the same as --quiet
since its introduction by 79862b6b77 (bundle-create: progress output
control, 2019-11-10) because it had been defined using OPT_SET_INT with
a value of 0, which sets 0 when negated as well.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fix.
* rs/describe-parseopt-fix:
describe: fix --no-exact-match
|
|
Command line parser fix.
* jc/parse-options-reset:
reset: reject --no-(mixed|soft|hard|merge|keep) option
|
|
Command line parser fixes.
* jc/parse-options-show-branch:
show-branch: reject --[no-](topo|date)-order
show-branch: --no-sparse should give dense output
|
|
Command line parser fixes.
* jc/transport-parseopt-fix:
fetch: reject --no-ipv[46]
parse-options: introduce OPT_IPVERSION()
|
|
Replace all cases of `\s` with ` ` as it is not part of POSIX BRE or ERE
and therefore not all versions of grep handle it.
For the same reason all cases of `\S` are replaced with `[^ ]`. It is
not an exact replacement but it is close enough for this use case.
Also, do not write `\+` in BRE and expect it to mean 1 or more;
it is a GNU extension that may not work everywhere.
Remove `.*` from the end of a pattern that is not right-anchored.
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fixes.
* jc/branch-parseopt-fix:
branch: reject "--no-all" and "--no-remotes" early
|
|
Command line parser fix.
* rs/ls-tree-no-full-name-fix:
ls-tree: fix --no-full-name
|
|
"git tag --list --points-at X" showed tags that directly refers to
object X, but did not list a tag that points at such a tag, which
has been corrected.
* jk/nested-points-at:
ref-filter: simplify return type of match_points_at
ref-filter: avoid parsing non-tags in match_points_at()
ref-filter: avoid parsing tagged objects in match_points_at()
ref-filter: handle nested tags in --points-at option
|
|
Test fix.
* rs/ref-filter-signature-fix:
t6300: fix setup with GPGSSH but without GPG
|
|
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
|
|
Test fix.
* dk/t4002-syntaxo-fix:
t4002: fix "diff can read from stdin" syntax
|
|
Help newbies by suggesting that there are cases where force-pushing
is a valid and sensible thing to update a branch at a remote
repository, rather than reconciling with merge/rebase.
* ah/advise-force-pushing:
push: don't imply that integration is always required before pushing
remote: don't imply that integration is always required before pushing
wt-status: don't show divergence advice when committing
|
|
In a previous commit, we introduced a sub-shell in the implementation of
`graph_git_behavior()`, in order to allow us to pass `-C "$DIR"`
directly to the git processes spawned by `graph_git_two_modes()`.
Now that its callers are always operating from the "$TRASH_DIRECTORY"
instead of one of its sub-directories, we can drop the inner sub-shell,
as it is no longer required.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the last commit, avoid top-level directory
changes in the last remaining commit-graph related test, t5328.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid changing the current working directory from outside of a sub-shell
during the tests in t5318.
Each test has mostly straightforward changes, either:
- Removing the top-level `cd "$TRASH_DIRECTORY/full"`, which is
unnecessary after ensuring that other tests don't change their
working directory outside of a sub-shell.
- Changing any Git invocations which want to be in a sub-directory by
either (a) adding a "-C $DIR" argument, or (b) moving the whole test
into a sub-shell.
While we're here, remove any explicit "git config core.commitGraph true"
invocations which were designed to enable use of the commit-graph. These
are unnecessary following 31b1de6a09b (commit-graph: turn on
commit-graph by default, 2019-08-13).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `graph_git_behavior()` helper asserts that a number of common Git
operations (such as `git log --oneline`, `git log --topo-order`, etc.)
produce identical output regardless of whether or not a commit-graph is
in use.
This helper takes as its second argument the location (relative to the
`$TRASH_DIRECTORY`) of the Git repostiory under test. In order to run
each of its commands within that repository, it first changes into that
directory, without the use of a sub-shell.
This pollutes future tests which expect to be run in the top-level
`$TRASH_DIRECTORY` as usual. We could wrap `graph_git_behavior()` in a
sub-shell, like:
graph_git_behavior() {
# ...
(
cd "$TRASH_DIRECTORY/$DIR" &&
graph_git_two_modesl
)
}
, but since we're invoking git directly, we can pass along a "-C $DIR"
when "$DIR" is non-empty.
Note, however, that until the remaining callers are cleaned up to avoid
changing working directories outside of a sub-shell, that we need to
ensure that we are operating in the top-level $TRASH_DIRECTORY. The
inner-subshell will go away in a future commit once it is no longer
necessary.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `graph_read_expect()` function is used to ensure that the output of
the "read-graph" test helper matches certain parameters (e.g., how many
commits are in the graph, which chunks were written, etc.).
It expects the Git repository being tested to be at the current working
directory. However, a handful of t5318 tests use different repositories
stored in sub-directories. To work around this, several tests in t5318
change into the relevant repository outside of a sub-shell, altering the
context for the rest of the suite.
Prepare to remove these globally-scoped directory changes by teaching
`graph_read_expect()` to take an optional "-C dir" to specify where the
repository containing the commit-graph being tested is.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Duplicate the logic of %(describe) and friends from pretty to
ref-filter. In the future, this change helps in unifying both the
formats as ref-filter will be able to do everything that pretty is doing
and we can have a single interface.
The new atom "describe" and its friends are equivalent to the existing
pretty formats with the same name.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before the todo list is edited it is rewritten to shorten the OIDs of
the commits being picked and to append advice about editing the list.
The exact advice depends on whether the todo list is being edited for
the first time or not. After the todo list has been edited it is
rewritten to lengthen the OIDs of the commits being picked and to remove
the advice. If the edited list cannot be parsed then this last step is
skipped.
Prior to db81e50724 (rebase-interactive: use todo_list_write_to_file()
in edit_todo_list(), 2019-03-05) if the existing todo list could not be
parsed then the initial rewrite was skipped as well. This had the
unfortunate consequence that if the list could not be parsed after the
initial edit the advice given to the user was wrong when they re-edited
the list. This change relied on todo_list_parse_insn_buffer() returning
the whole todo list even when it cannot be parsed. Unfortunately if the
list starts with a "fixup" command then it will be truncated and the
remaining lines are lost. Fix this by continuing to parse after an
initial "fixup" commit as we do when we see any other invalid line.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[jc: removed an apparently unneeded subshell around the test body]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git branch -f" command can refuse to force-update a branch that
is used by another worktree. The original rationale for this
behaviour was that updating a branch that is checked out in another
worktree, without making a matching change to the index and the
working tree files in that worktree, will lead to a very confused
user. "git diff HEAD" will no longer give a useful patch, because
HEAD is a commit unrelated to what the index and the working tree in
the worktree were based on, for example.
These days, the same mechanism also protects branches that are being
rebased or bisected, and the same machanism is expected to be the
right place to add more checks, when we decide to protect branches
undergoing other kinds of operations. We however forgot to rethink
the messaging, which originally said that we are refusing to touch
the branch because it is "checked out" elsewhere, when d2ba271a
(branch: check for bisects and rebases, 2022-06-14) started to
protect branches that are being rebased or bisected.
The spirit of the check has always been that we do not want to
disrupt the use of the same branch in other worktrees. Let's reword
the message slightly to say that the branch is "used by" another
worktree, instead of "checked out".
We could teach the branch.c:prepare_checked_out_branches() function
to remember why it decided that a particular branch needs protecting
(i.e. was it because it was checked out? being bisected? something
else?) in addition to which worktree the branch was in use, and use
that in the error message to say "you cannot force update this
branch because it is being bisected in the worktree X", etc., but it
is dubious that such extra complexity is worth it. The message
already tells which directory the worktree in question is, and it
should be just a "chdir" away for the user to find out what state it
is in, if the user felt curious enough. So let's not go there yet.
Helped-by: Josh Sref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
|
|
Since 2c33f75754 (Teach git-describe --exact-match to avoid expensive
tag searches, 2008-02-24) git describe accepts --no-exact-match, but it
does the same as --exact-match, an alias for --candidates=0. That's
because it's defined using OPT_SET_INT with a value of 0, which sets 0
when negated as well.
Let --no-exact-match set the number of candidates to the default value
instead. Users that need a more specific lack of exactitude can specify
their preferred value using --candidates, as before.
The "--no-exact-match" option was not covered in the tests, so let's
add a few. Also add a case where --exact-match option is used on a
commit that cannot be described without distance from tags and make
sure the command fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
[jc: added trivial tests]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --contents option can be used with git blame to blame the file
as if it had the contents from the specified file. Since 1a3119ed
(blame: allow --contents to work with non-HEAD commit, 2023-03-24),
the --contents option can work with non-HEAD commit. However, if you
try to use --contents in a bare repository, you get the following
error:
fatal: this operation must be run in a work tree
This is because before trying to generate a fake working tree
commit, we always call setup_work_tree(). But in a bare repo,
working tree is not available. The call to setup_work_tree is used
to prepare the reading of the blamed file in the working tree, which
isn't necessary if we are reading the contents from the specific
file instead of the file in the working tree.
Add a check in setup_scoreboard to skip setup_work_tree if we are
reading from the file specified in --contents.
This enables us to use --contents in a bare repo. This is a nice
addition on top of 1a3119ed, having a working tree to use --contents
is optional.
Add test for the --contents option with bare repo to the
annotate-tests.sh test script.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As mentioned in the thread starting at [1], trace2 counters should be
used to count events instead of ad-hoc static variables.
Convert the two fsync static variables to trace2 counters, reducing the
coupling between wrapper.c and the trace2 subsystem. Adjust t/t5351 to
match the trace2 counter output format.
The counters are not per-thread because the ones being replaced also
were not.
[1] https://lore.kernel.org/git/20230627195251.1973421-2-calvinwan@google.com/
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git reset --no-mixed" behaved exactly like "git reset --mixed",
which was nonsense.
If there were only two kinds, e.g. "mixed" vs "separate", it might
have made sense to make "git reset --no-mixed" behave identically to
"git reset --separate" and vice-versa, but because we have many
types of reset, let's just forbid "--no-mixed" and negated form of
other types.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git show-branch --no-topo-order" behaved exactly the same way as
"git show-branch --topo-order" did, which was nonsense. This was
because we choose between topo- and date- by setting a variable to
either REV_SORT_IN_GRAPH_ORDER or REV_SORT_BY_COMMIT_DATE with
OPT_SET_INT() and REV_SORT_IN_GRAPH_ORDER happens to be 0. The
OPT_SET_INT() macro assigns 0 to the target variable in respose to
the negated form of its option.
"--no-date-order" by luck behaves identically to "--topo-order"
exactly for the same reason, and it sort-of makes sense right now,
but the "sort-of makes sense" will quickly break down once we add a
third way to sort. Not-A may be B when there are only two choices
between A and B, but once your choices become among A, B, and C,
not-A does not mean B.
Just mark these two ordering options to reject negation, and add a
test, which was missing. "git show-branch --no-reflog" is also
unnegatable, so throw in a test for that while we are at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parse-options API responds to "git cmd -h" by listing the option
flag (padded to the USAGE_OPTS_WIDTH column), followed by USAGE_GAP
(set to 2) whitespaces, followed by the help text. If the flags
part does not fit within the USAGE_OPTS_WIDTH, the help text is given
on its own line. Imagine that "@" below depicts the USAGE_OPTS_WIDTH'th
column, and "#" are for the usage help text, the output may look
like this:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--very-long-option=<number>
description of the flag '--very-long-option'
This is all good and nice in principle, but it becomes awkward when
the flags part is just one column over the limit and forces a line
break. See the description of the "--almost" option below:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--almost=<num>
description of the flag '--almost'
--very-long-option=<number>
description of the flag '--very-long-option'
If we allow shrinking the gap to a single whitespace only in such a
case, we would instead get:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--almost=<num> description of the flag '--almost'
--very-long-option=<number>
description of the flag '--very-long-option'
and the boundary between the flags and their descriptions does not
become any harder to see, while saving precious vertical screen real
estate.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "-h" triggers the short-help in a command that implements its
option parsing using the parse-options API, the option help text is
shown with a single fprintf() as a long line. When the text is
multi-line, the second and subsequent lines are not left padded,
that breaks the alignment across options.
Borrowing the idea from the advice API where its hint strings are
shown with (localized) "hint:" prefix, let's internally split the
(localized) help text into lines, and showing the first line, pad
the remaining lines to align.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git show-branch --no-sparse" behaved exactly the same way as "git
show-branch --sparse", which did not make any sense. This was
because it used a variable "dense" initialized to 1 by default to
give "non sparse" behaviour, and OPT_SET_INT() to set the varilable
to 0 in response to the "--sparse" option. Unfortunately,
OPT_SET_INT() sets 0 to the given variable when the option is
negated.
Flip the polarity of the variable "dense" by renaming it to "sparse"
and initializing it to 0, and have OPT_SET_INT() set the variable to
1 when "--sparse" is given. This way, "--no-sparse" would set 0 to
the variable and would give us the "dense" behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now we have introduced OPT_IPVERSION(), tweak its implementation so
that "git clone", "git fetch", and "git push" reject the negated
form of "Use only IP version N" options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the command line parser for "git branch --all" forgets to use
PARSE_OPT_NONEG, it accepted "git branch --no-all", and then passed
a nonsense value to the underlying machinery, leading to a fatal
error "filter_refs: invalid type". The "--remotes" option had
exactly the same issue.
Catch the unsupported options early in the option parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 61fdbcf98b (ls-tree: migrate to parse-options, 2009-11-13) git
ls-tree has accepted the option --no-full-name, but it does the same
as --full-name, contrary to convention. That's because it's defined
using OPT_SET_INT with a value of 0, where the negative variant sets
0 as well.
Turn --no-full-name into the opposite of --full-name by using OPT_BOOL
instead and storing the option's status directly in a variable named
"full_name" instead of in negated form in "chomp_prefix".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck --no-progress" still spewed noise from the commit-graph
subsystem, which has been corrected.
* tb/fsck-no-progress:
commit-graph.c: avoid duplicated progress output during `verify`
commit-graph.c: pass progress to `verify_one_commit_graph()`
commit-graph.c: iteratively verify commit-graph chains
commit-graph.c: extract `verify_one_commit_graph()`
fsck: suppress MIDX output with `--no-progress`
fsck: suppress commit-graph output with `--no-progress`
|
|
The recent change to "git repack" made it react less nicely when a
leftover .idx file that no longer has the corresponding .pack file
in the repository, which has been corrected.
* tb/repack-cleanup:
builtin/repack.c: avoid dir traversal in `collect_pack_filenames()`
builtin/repack.c: only repack `.pack`s that exist
|
|
Tags are dereferenced until reaching a different object type to handle
nested tags, e.g. on checkout. In contrast, "git tag --points-at=..."
fails to list such nested tags because only one level of indirection is
obtained in filter_refs(). Implement the recursive dereferencing for the
"--points-at" option when filtering refs to unify the behaviour.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
