| Age | Commit message (Collapse) | Author |
|---|
|
We currently have one test for %(trailers). In preparation
for more, let's refactor a few bits:
- move the commit creation to its own setup step so it can
be reused by multiple tests
- add a trailer with whitespace continuation (to confirm
that it is left untouched)
- fix the sample text which claims the placeholder is %bT.
This was switched long ago to %(trailers)
- replace one "cat" with an "echo" when generating the
expected output. This saves a process (and sets a better
pattern for future tests to follow).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of "--only-trailers" is to give a caller an output
that's easy for them to parse. Getting rid of the
non-trailer material helps, but we still may see more
complicated syntax like whitespace continuation. Let's add
an option to unfold any continuation, giving the output as a
single "key: value" line per trailer.
As a bonus, this could be used even without --only-trailers
to clean up unusual formatting in the incoming data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be useful to invoke interpret-trailers for the
primary purpose of parsing existing trailers. But in that
case, we don't want to apply existing ifMissing or ifExists
rules from the config. Let's add a special mode where we
avoid applying those rules. Coupled with --only-trailers,
this gives us a reasonable parsing tool.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In theory it's easy for any reader who wants to parse
trailers to do so. But there are a lot of subtle corner
cases around what counts as a trailer, when the trailer
block begins and ends, etc. Since interpret-trailers already
has our parsing logic, let's let callers ask it to just
output the trailers.
They still have to parse the "key: value" lines, but at
least they can ignore all of the other corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A test fix.
* jk/test-copy-bytes-fix:
t: handle EOF in test_copy_bytes()
|
|
Code refactoring.
* pw/unquote-path-in-git-pm:
t9700: add tests for Git::unquote_path()
Git::unquote_path(): throw an exception on bad path
Git::unquote_path(): handle '\a'
add -i: move unquote_path() to Git.pm
|
|
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
|
|
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
|
|
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
|
|
The test_copy_bytes() function claims to read up to N bytes,
or until it gets EOF. But we never handle EOF in our loop,
and a short input will cause perl to go into an infinite
loop of read() getting zero bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Therefore, we must compare the alias name insensitively to the config
keys.
This fixes a regression introduced by a9bcf6586d1 (alias: use
the early config machinery to expand aliases, 2017-06-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Except that now it does: the alias name is expected to be all
lower-case. This is a regression introduced by a9bcf6586d1 (alias: use
the early config machinery to expand aliases, 2017-06-14).
Noticed by Alejandro Pauly, diagnosed by Kevin Willford.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rewrite of "git branch --list" using for-each-ref's internals
that happened in v2.13 regressed its handling of color.branch.local;
this has been fixed.
* kn/ref-filter-branch-list:
ref-filter.c: drop return from void function
branch: set remote color in ref-filter branch immediately
branch: use BRANCH_COLOR_LOCAL in ref-filter format
branch: only perform HEAD check for local branches
|
|
After "git branch --move" of the currently checked out branch, the
code to walk the reflog of HEAD via "log -g" and friends
incorrectly stopped at the reflog entry that records the renaming
of the branch.
* jk/reflog-walk-maint:
reflog-walk: include all fields when freeing complete_reflogs
reflog-walk: don't free reflogs added to cache
reflog-walk: duplicate strings in complete_reflogs list
reflog-walk: skip over double-null oid due to HEAD rename
|
|
We normally try to avoid having two auto-gc operations run
at the same time, because it wastes resources. This was done
long ago in 64a99eb47 (gc: reject if another gc is running,
unless --force is given, 2013-08-08).
When we do a detached auto-gc, we run the ref-related
commands _before_ detaching, to avoid confusing lock
contention. This was done by 62aad1849 (gc --auto: do not
lock refs in the background, 2014-05-25).
These two features do not interact well. The pre-detach
operations are run before we check the gc.pid lock, meaning
that on a busy repository we may run many of them
concurrently. Ideally we'd take the lock before spawning any
operations, and hold it for the duration of the program.
This is tricky, though, with the way the pid-file interacts
with the daemonize() process. Other processes will check
that the pid recorded in the pid-file still exists. But
detaching causes us to fork and continue running under a
new pid. So if we take the lock before detaching, the
pid-file will have a bogus pid in it. We'd have to go back
and update it with the new pid after detaching. We'd also
have to play some tricks with the tempfile subsystem to
tweak the "owner" field, so that the parent process does not
clean it up on exit, but the child process does.
Instead, we can do something a bit simpler: take the lock
only for the duration of the pre-detach work, then detach,
then take it again for the post-detach work. Technically,
this means that the post-detach lock could lose to another
process doing pre-detach work. But in the long run this
works out.
That second process would then follow-up by doing
post-detach work. Unless it was in turn blocked by a third
process doing pre-detach work, and so on. This could in
theory go on indefinitely, as the pre-detach work does not
repack, and so need_to_gc() will continue to trigger. But
in each round we are racing between the pre- and post-detach
locks. Eventually, one of the post-detach locks will win the
race and complete the full gc. So in the worst case, we may
racily repeat the pre-detach work, but we would never do so
simultaneously (it would happen via a sequence of serialized
race-wins).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* js/fsck-name-object:
t1450: use egrep for regexp "alternation"
|
|
A few tests that tried to verify the contents of push certificates
did not use 'git rev-parse' to formulate the line to look for in
the certificate correctly.
* js/t5534-rev-parse-gives-multi-line-output-fix:
t5534: fix misleading grep invocation
|
|
The split index code did not honor core.sharedrepository setting
correctly.
* cc/shared-index-permfix:
t1700: make sure split-index respects core.sharedrepository
t1301: move modebits() to test-lib-functions.sh
read-cache: use shared perms when writing shared index
|
|
Cosmetic update to a test.
* ks/t7508-indent-fix:
t7508: fix a broken indentation
|
|
Test clean-up.
* sb/t4005-modernize:
t4005: modernize style and drop hard coded sha1
|
|
Tighten error checks for invalid "git apply" input.
* rs/apply-validate-input:
apply: check git diffs for mutually exclusive header lines
apply: check git diffs for invalid file modes
apply: check git diffs for missing old filenames
|
|
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
|
|
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
* jk/add-p-commentchar-fix:
add--interactive: quote commentChar regex
add--interactive: handle EOF in prompt_yesno
|
|
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
|
|
Since 949af0684 (branch: use ref-filter printing APIs,
2017-01-10), git-branch's output is generated by passing a
custom format to the ref-filter code. This format forgot to
pass BRANCH_COLOR_LOCAL, meaning that local branches
(besides the current one) were never colored at all.
We can add it in the %(if) block where we decide whether the
branch is "current" or merely "local". Note that this means
the current/local coloring is either/or. You can't set:
[color "branch"]
local = blue
current = bold
and expect the current branch to be "bold blue". This
matches the pre-949af0684 behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_reflog_for_walk() function keeps a cache mapping
refnames to their reflog contents. We use a cached reflog
entry if available, and otherwise allocate and store a new
one.
Since 5026b47175 (add_reflog_for_walk: avoid memory leak,
2017-05-04), when we hit an error parsing a date-based
reflog spec, we free the reflog memory but leave the cache
entry pointing to the now-freed memory.
We can fix this by just leaving the memory intact once it
has made it into the cache. This may leave an unused entry
in the cache, but that's OK. And it means we also catch a
similar situation: we may not have allocated at all in this
invocation, but simply be pointing to a cached entry from a
previous invocation (which is relying on that entry being
present).
The new test in t1411 exercises this case and fails when run
with --valgrind or ASan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of the add_reflog_to_walk() function, we keep a
string_list mapping refnames to their reflog contents. This
serves as a cache so that accessing the same reflog twice
requires only a single copy of the log in memory.
The string_list is initialized via xcalloc, meaning its
strdup_strings field is set to 0. But after inserting a
string into the list, we unconditionally call free() on the
string, leaving the list pointing to freed memory. If
another reflog is added (e.g., "git log -g HEAD HEAD"), then
the second one may have unpredictable results.
The extra free was added by 5026b47175 (add_reflog_for_walk:
avoid memory leak, 2017-05-04). Though if you look
carefully, you can see that the code was buggy even before
then. If we tried to read the reflogs by time but came up
with no entries, we exited with an error, freeing the string
in that code path. So the bug was harder to trigger, but
still there.
We can fix it by just asking the string list to make a copy
of the string. Technically we could fix the problem by not
calling free() on our string (and just handing over
ownership to the string list), but there are enough
conditionals that it's quite hard to figure out which code
paths need the free and which do not. Simpler is better
here.
The new test reliably shows the problem when run with
--valgrind or ASAN.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cygwin can use an UNC path like //server/share/repo
$ cd //server/share/dir
$ mkdir test
$ cd test
$ git init --bare
However, when we try to push from a local Git repository to this repo,
there is a problem: Git converts the leading "//" into a single "/".
As cygwin handles an UNC path so well, Git can support them better:
- Introduce cygwin_offset_1st_component() which keeps the leading "//",
similar to what Git for Windows does.
- Move CYGWIN out of the POSIX in the tests for path normalization in t0060
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 39ee4c6c2f (branch: record creation of renamed branch
in HEAD's log, 2017-02-20), a rename on the currently
checked out branch will create two entries in the HEAD
reflog: one where the branch goes away (switching to the
null oid), and one where it comes back (switching away from
the null oid).
This confuses the reflog-walk code. When walking backwards,
it first sees the null oid in the "old" field of the second
entry. Thanks to the "root commit" logic added by 71abeb753f
(reflog: continue walking the reflog past root commits,
2016-06-03), we keep looking for the next entry by scanning
the "new" field from the previous entry. But that field is
also null! We need to go just a tiny bit further, and look
at its "old" field. But with the current code, we decide the
reflog has nothing else to show and just give up. To the
user this looks like the reflog was truncated by the rename
operation, when in fact those entries are still there.
This patch does the absolute minimal fix, which is to look
back that one extra level and keep traversing.
The resulting behavior may not be the _best_ thing to do in
the long run (for example, we show both reflog entries each
with the same commit id), but it's a simple way to fix the
problem without risking further regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems to be a little-known feature of `grep` (and it certainly came
as a surprise to this here developer who believed to know the Unix tools
pretty well) that multiple patterns can be passed in the same
command-line argument simply by separating them by newlines. Watch, and
learn:
$ printf '1\n2\n3\n' | grep "$(printf '1\n3\n')"
1
3
That behavior also extends to patterns passed via `-e`, and it is not
modified by passing the option `-E` (but trying this with -P issues the
error "grep: the -P option only supports a single pattern").
It seems that there are more old Unix hands who are surprised by this
behavior, as grep invocations of the form
grep "$(git rev-parse A B) C" file
were introduced in a85b377d041 (push: the beginning of "git push
--signed", 2014-09-12), and later faithfully copy-edited in b9459019bbb
(push: heed user.signingkey for signed pushes, 2014-10-22).
Please note that the output of `git rev-parse A B` separates the object
IDs via *newlines*, not via spaces, and those newlines are preserved
because the interpolation is enclosed in double quotes.
As a consequence, these tests try to validate that the file contains
either A's object ID, or B's object ID followed by C, or both. Clearly,
however, what the test wanted to see is that there is a line that
contains all of them.
This is clearly unintended, and the grep invocations in question really
match too many lines.
Fix the test by avoiding the newlines in the patterns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check that unquote_path() handles spaces and escape sequences
properly.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GNU grep allows "\(A\|B\)" as alternation in BRE, but this is an
extension not understood by some other implementations of grep
(Michael Kebe reported an breakage on Solaris).
Rewrite the offending test to ERE and use egrep instead.
Noticed-by: Michael Kebe <michael.kebe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A file can either be added, removed, copied, or renamed, but no two of
these actions can be done by the same patch. Some of these combinations
provoke error messages due to missing file names, and some are only
caught by an assertion. Check git patches already as they are parsed
and report conflicting lines on sight.
Found by Vegard Nossum using AFL.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An empty string as mode specification is accepted silently by git apply,
as Vegard Nossum found out using AFL. It's interpreted as zero. Reject
such bogus file modes, and only accept ones consisting exclusively of
octal digits.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
2c93286a (fix "git apply --index ..." not to deref NULL) added a check
for git patches missing a +++ line, preventing a segfault. Check for
missing --- lines as well, and add a test for each case.
Found by Vegard Nossum using AFL.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a few tests to check that both the split-index file and the
shared-index file are created using the right permissions when
core.sharedrepository is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the modebits() function can be useful outside t1301,
let's move it into test-lib-functions.sh, and while at
it let's rename it test_modebits().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New test.
* sd/t3200-branch-m-test:
t3200: add test for single parameter passed to -m option
|
|
New tests.
* km/test-mailinfo-b-failure:
t5100: add some more mailinfo tests
|
|
"git stash push <pathspec>" did not work from a subdirectory at all.
Bugfix for a topic in v2.13
* ps/stash-push-pathspec-fix:
git-stash: fix pushing stash with pathspec from subdir
|
|
A flaky test has been corrected.
* jk/pack-idx-corruption-safety:
t5313: make extended-table test more deterministic
|
|
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
|
|
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
|
|
Newly added tests to t3420 in this series prepare expected
human-readable output from "git rebase -i" and then compare the
actual output with it. As the output from the command is designed
to go through i18n/l10n, we need to use test_i18ncmp to tell
GETTEXT_POISON build that it is OK the output does not match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since c9d961647 (i18n: add--interactive: mark
edit_hunk_manually message for translation, 2016-12-14),
when the user asks to edit a hunk manually, we respect
core.commentChar in generating the edit instructions.
However, when we then strip out comment lines, we use a
simple regex like:
/^$commentChar/
If your chosen comment character is a regex metacharacter,
then that will behave in a confusing manner ("$", for
instance, would only eliminate blank lines, not actual
comment lines).
We can fix that by telling perl not to respect
metacharacters.
Reported-by: Christian Rösch <christian@croesch.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the indentation from "\t " to "\t". This indenting issue was
introduced when the test was added in commit 1d2f393ac9
("status/commit: show staged submodules regardless of ignore
config", 2014-04-05).
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check the console output when using --autostash and the stash does not
apply is what we expect. The test is quite strict but should catch any
changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check the console output when using --autostash and the stash applies
cleanly is what we expect. The test is quite strict but should catch
any changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check that the reflog message written to the branch reflog when the
rebase is completed is correct
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of discovering the .git/ directory, reading the config and then
trying to painstakingly reset all the global state if we did not find a
matching alias, let's use the early config machinery instead.
It may look like unnecessary work to discover the .git/ directory in the
early config machinery and then call setup_git_directory_gently() in the
case of a shell alias, repeating the very same discovery *again*.
However, we have to do this as the early config machinery takes pains
*not* to touch any global state, while shell aliases expect a possibly
changed working directory and at least the GIT_PREFIX and GIT_DIR
variables to be set.
This change also fixes a known issue where Git tried to read the pager
config from an incorrect path in a subdirectory of a Git worktree if an
alias expanded to a shell command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
