| Age | Commit message (Collapse) | Author |
|---|
|
A test that unconditionally used "mktemp" learned that the command
is not necessarily available everywhere.
* ak/lazy-prereq-mktemp:
t7610: test for mktemp before test execution
|
|
"git grep -i" has been taught to fold case in non-ascii locales
correctly.
* nd/icase:
grep.c: reuse "icase" variable
diffcore-pickaxe: support case insensitive match on non-ascii
diffcore-pickaxe: Add regcomp_or_die()
grep/pcre: support utf-8
gettext: add is_utf8_locale()
grep/pcre: prepare locale-dependent tables for icase matching
grep: rewrite an if/else condition to avoid duplicate expression
grep/icase: avoid kwsset when -F is specified
grep/icase: avoid kwsset on literal non-ascii strings
test-regex: expose full regcomp() to the command line
test-regex: isolate the bug test code
grep: break down an "if" stmt in preparation for next changes
|
|
The test framework learned a new helper test_match_signal to
check an exit code from getting killed by an expected signal.
* jk/test-match-signal:
t/lib-git-daemon: use test_match_signal
test_must_fail: use test_match_signal
t0005: use test_match_signal as appropriate
tests: factor portable signal check out of t0005
|
|
Grammofix.
* js/t3404-grammo-fix:
t3404: fix a grammo (commands are ran -> commands are run)
|
|
"git rebase -i --autostash" did not restore the auto-stashed change
when the operation was aborted.
* ps/rebase-i-auto-unstash-upon-abort:
rebase -i: restore autostash on abort
|
|
Git does not know what the contents in the index should be for a
path added with "git add -N" yet, so "git grep --cached" should not
show hits (or show lack of hits, with -L) in such a path, but that
logic does not apply to "git grep", i.e. searching in the working
tree files. But we did so by mistake, which has been corrected.
* nd/ita-cleanup:
grep: fix grepping for "intent to add" files
t7810-grep.sh: fix a whitespace inconsistency
t7810-grep.sh: fix duplicated test name
|
|
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
|
|
Add a test to specify the desired behaviour that currently is not
available in "git rebase -Xsubtree=...".
* dg/subtree-rebase-test:
contrib/subtree: Add a test for subtree rebase that loses commits
|
|
Skip tests that are unrunnable on platforms without 64-bit long
to avoid unnecessary test failures.
* jk/tzoffset-fix:
t0006: skip "far in the future" test when unsigned long is not long enough
|
|
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough
to capture dates that are "absurdly far in the future".
While we can fix this issue properly by replacing unsigned long with
a larger type, we want to be a bit more conservative and just skip
those tests on the maint track.
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix for Windows.
* jc/t2300-setup:
t2300: "git --exec-path" is not usable in $PATH on Windows as-is
|
|
Test clean-up.
* cb/t7810-test-label-fix:
t7810: fix duplicated test title
|
|
Test clean-up.
* sb/t5614-modernize:
t5614: don't use subshells
|
|
t/perf needs /usr/bin/time with GNU extension; the invocation of it
is updated to "gtime" on Darwin.
* js/perf-on-apple:
perf: accommodate for MacOSX
|
|
One among four invocations of readlink(1) in our test suite has
been rewritten so that the test can run on systems without the
command (others are in valgrind test framework and t9802).
* ak/t7800-wo-readlink:
t7800: readlink may not be available
|
|
The internal code used to show local timezone offset is not
prepared to handle timestamps beyond year 2100, and gave a
bogus offset value to the caller. Use a more benign looking
+0000 instead and let "git log" going in such a case, instead
of aborting.
* jk/tzoffset-fix:
local_tzoffset: detect errors from tm_to_time_t
t0006: test various date formats
t0006: rename test-date's "show" to "relative"
|
|
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
|
|
"log --graph --format=" learned that "%>|(N)" specifies the width
relative to the terminal's left edge, not relative to the area to
draw text that is to the right of the ancestry-graph section. It
also now accepts negative N that means the column limit is relative
to the right border.
* nd/graph-width-padded:
pretty.c: support <direction>|(<negative number>) forms
pretty: pass graph width to pretty formatting for use in '%>|(N)'
|
|
"git update-index --add --chmod=+x file" may be usable as an escape
hatch, but not a friendly thing to force for people who do need to
use it regularly. "git add --chmod=+x file" can be used instead.
* et/add-chmod-x:
add: add --chmod=+x / --chmod=-x options
|
|
"git reflog" stopped upon seeing an entry that denotes a branch
creation event (aka "unborn"), which made it appear as if the
reflog was truncated.
* sg/reflog-past-root:
reflog: continue walking the reflog past root commits
|
|
mktemp is not available on all platforms, so the test
'temporary filenames are used with mergetool.writeToTemp'
fails there.
This patch does not replace mktemp but just disables
the test that otherwise would fail.
mergetool checks itself before executing mktemp and
reports an error.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-daemon exits, we expect it to be with the SIGTERM
we just sent it. If we see anything else, we'll complain.
But our check against exit code "143" is not portable. For
example:
$ ksh93 t5570-git-daemon.sh
[...]
error: git daemon exited with status: 271
We can fix this by using test_match_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8bf4bec (add "ok=sigpipe" to test_must_fail and use it to
fix flaky tests, 2015-11-27), test_must_fail learned to
recognize "141" as a sigpipe failure. However, testing for
a signal is more complicated than that; we should use
test_match_signal to implement more portable checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first test already uses this more portable construct
(that was where it was factored from initially), but the
later tests do a raw comparison against 141 to look for
SIGPIPE, which can fail on some shells and platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In POSIX shells, a program which exits due to a signal
generally has an exit code of 128 plus the signal number.
However, ksh uses 256 plus the signal number. We've
accounted for that in t0005, but not in other tests. Let's
pull out the logic so we can use it elsewhere.
It would be nice for debugging if this additionally printed
errors to stderr, like our other test_* helpers. But we're
going to need to use it in other places besides the innards
of a test_expect block. So let's leave it as generic as
possible.
Note that we also leave the magic "3" for Windows out of the
generic helper. This is an artifact of the way we use
raise() to kill ourselves in test-sigchain.c, and will not
necessarily apply to all programs. So it's better to keep it
out of the helper, to reduce the chance of confusing it with
a real call to exit(3).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 4d5520053 (grep: make it clear i-t-a entries are
ignored, 2015-12-27) and adds an alternative fix to maintain the -L
--cached behavior.
4d5520053 caused 'git grep' to no longer find matches in new files in
the working tree where the corresponding index entry had the "intent to
add" bit set, despite the fact that these files are tracked.
The content in the index of a file for which the "intent to add" bit is
set is considered indeterminate and not empty. For most grep queries we
want these to behave the same, however for -L --cached (files without a
match) we don't want to respond positively for "intent to add" files as
their contents are indeterminate. This is in contrast to files with
empty contents in the index (no lines implies no matches for any grep
query expression) which should be reported in the output of a grep -L
--cached invocation.
Add tests to cover this case and a few related cases which previously
lacked coverage.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the "grep -F -i" case, we can't use kws on icase search
outside ascii range, so we quote the string and pass it to regcomp as
a basic regexp and let regex engine deal with case sensitivity.
The new test is put in t7812 instead of t4209-log-pickaxe because
lib-gettext.sh might cause problems elsewhere, probably.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous change in this function, we add locale support for
single-byte encodings only. It looks like pcre only supports utf-* as
multibyte encodings, the others are left in the cold (which is
fine).
We need to enable PCRE_UTF8 so pcre can find character boundary
correctly. It's needed for case folding (when --ignore-case is used)
or '*', '+' or similar syntax is used.
The "has_non_ascii()" check is to be on the conservative side. If
there's non-ascii in the pattern, the searched content could still be
in utf-8, but we can treat it just like a byte stream and everything
should work. If we force utf-8 based on locale only and pcre validates
utf-8 and the file content is in non-utf8 encoding, things break.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default tables are usually built with C locale and only suitable
for LANG=C or similar. This should make case insensitive search work
correctly for all single-byte charsets.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the previous commit, we can't use kws on icase search
outside ascii range. But we can't simply pass the pattern to
regcomp/pcre like the previous commit because it may contain regex
special characters, so we need to quote the regex first.
To avoid misquote traps that could lead to undefined behavior, we
always stick to basic regex engine in this case. We don't need fancy
features for grepping a literal string anyway.
basic_regex_quote_buf() assumes that if the pattern is in a multibyte
encoding, ascii chars must be unambiguously encoded as single
bytes. This is true at least for UTF-8. For others, let's wait until
people yell up. Chances are nobody uses multibyte, non utf-8 charsets
anymore.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we abort an interactive rebase we do so by calling
`die_abort`, which cleans up after us by removing the rebase
state directory. If the user has requested to use the autostash
feature, though, the state directory may also contain a reference
to the autostash, which will now be deleted.
Fix the issue by trying to re-apply the autostash in `die_abort`.
This will also handle the case where the autostash does not apply
cleanly anymore by recording it in a user-visible stash.
Reported-by: Daniel Hahler <git@thequod.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test merges an external tree in as a subtree, makes some commits
on top of it and splits it back out. In the process the added commits
are lost or the rebase aborts with an internal error. The tests are
marked to expect failure so that we don't forget to fix it.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git show -W" (extend hunks to cover the entire function, delimited
by lines that match the "funcname" pattern) used to show the entire
file when a change added an entire function at the end of the file,
which has been fixed.
* rs/xdiff-hunk-with-func-line:
xdiff: fix merging of appended hunk with -W
grep: -W: don't extend context to trailing empty lines
t7810: add test for grep -W and trailing empty context lines
xdiff: don't trim common tail with -W
xdiff: -W: don't include common trailing empty lines in context
xdiff: ignore empty lines before added functions with -W
xdiff: handle appended chunks better with -W
xdiff: factor out match_func_rec()
t4051: rewrite, add more tests
|
|
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
|
|
The commands in `git log` family take %C(auto) in a custom format
string. This unconditionally turned the color on, ignoring
--no-color or with --color=auto when the output is not connected to
a tty; this was corrected to make the format truly behave as
"auto".
* et/pretty-format-c-auto:
format_commit_message: honor `color=auto` for `%C(auto)`
|
|
When we detect the pattern is just a literal string, we avoid heavy
regex engine and use fast substring search implemented in kwsset.c.
But kws uses git-ctype which is locale-independent so it does not know
how to fold case properly outside ascii range. Let regcomp or pcre
take care of this case instead. Slower, but accurate.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is in preparation to turn test-regex into some generic regex
testing command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git" command prepends the exec-path to the PATH environment
variable for processes it spawns. That is how ". git-sh-setup" in
our scripted Porcelains can find the dot-sourced file in the
exec-path location that is not usually on user's PATH.
When t2300 runs, because it is not spawned by the "git" command, the
scriptlet being tested did not run with a realistic setting of PATH
environment. It lacked the exec-path on the PATH, and failed to
find the dot-sourced file. A recent update to t2300 attempted to
fix this, with "PATH=$(git --exec-path):$PATH", which has been the
recommended way around v1.6.0 days (a script whose original was
written before that release that survives to this day is likely to
have such a line).
However, the "git --exec-path" command outputs C:\path\to\exec\dir
(not /c/path/to/exec/dir) on Windows; the recent update failed to
consider the problem that comes from it.
Even though Git itself, when doing the equivalent internally, does
so in a platform native way (i.e. on Windows, C:\path\to\exec\dir is
prepended to the existing value of %PATH% using ';' as a component
separator), the result is further massaged by bash and gets turned
into $PATH that uses /c/path/to/exec/dir with ':' separating the
components, which is the form understood by bash, so scripted
Porcelains find commands from PATH correctly.
An end user script written in shell, however, cannot prepend
"C:\path\to\exec\dir:" to the existing value of $PATH and expect
bash to magically turn it into the form it understands. In other
words, "PATH=$(git --exec-path):$PATH" does not work as an emulation
of what "Git" internally does to the PATH on Windows.
To correctly emulate how exec-path is prepended to the PATH
environment internally on Windows, we'd need to convert
C:\git-sdk-64\usr\src\git to at least /c\git-sdk-64\usr\src\git
ourselves before prepending it to PATH.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like the pretty printing machinery, we should simply ignore
blank lines at the beginning of the commit messages.
This discrepancy was noticed when an early version of the
rebase--helper produced commit objects with more than one empty line
between the header and the commit message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using a subshell for just one git command is both a waste in compute
overhead (create a new process) as well as in line count.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The readlink(1) command is not available on all platforms (notably
not on AIX and HP-UX) and can be replaced in this test with the
"workaround"
ls -ld <name> | sed -e 's/.* -> //'
This is no universal readlink replacement but works in the
controlled test environment well enough.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As this developer has no access to MacOSX developer setups anymore,
Travis becomes the best bet to run performance tests on that OS.
However, on MacOSX /usr/bin/time is that good old BSD executable that
no Linux user cares about, as demonstrated by the perf-lib.sh's use
of GNU-ish extensions. And by the hard-coded path.
Let's just work around this issue by using gtime on MacOSX, the
Homebrew-provided GNU implementation onto which pretty much every
MacOSX power user falls back anyway.
To help other developers use Travis to run performance tests on
MacOSX, the .travis.yml file now sports a commented-out line that
installs GNU time via Homebrew.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to know the local timezone offset at a given
timestamp, we compute it by asking for localtime() at the
given time, and comparing the offset to GMT at that time.
However, there's some juggling between time_t and "struct
tm" which happens, which involves calling our own
tm_to_time_t().
If that function returns an error (e.g., because it only
handles dates up to the year 2099), it returns "-1", which
we treat as a time_t, and is clearly bogus, leading to
bizarre timestamps (that seem to always adjust the time back
to (time_t)(uint32_t)-1, in the year 2106).
It's not a good idea for local_tzoffset() to simply die
here; it would make it hard to run "git log" on a repository
with funny timestamps. Instead, let's just treat such cases
as "zero offset".
Reported-by: Norbert Kiesel <nkiesel@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We ended up testing some of these date formats throughout
the rest of the suite (e.g., via for-each-ref's
"$(authordate:...)" format), but we never did so
systematically. t0006 is the right place for unit-testing of
our date-handling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "show" tests are really only checking relative formats;
we should make that more clear.
This also frees up the "show" name to later check other
formats. We could later fold "relative" into a more generic
"show" command, but it's not worth it. Relative times are a
special case already because we have to munge the concept of
"now" in our tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In v2.9.0, we prematurely flipped the default to force cloning
submodules shallowly, when the superproject is getting cloned
shallowly. This is likely to fail when the upstream repositories
submodules are cloned from a repository that is not prepared to
serve histories that ends at a commit that is not at the tip of a
branch, and we know the world is not yet ready.
Use a safer default to clone the submodules fully, unless the user
tells us that she knows that the upstream repository of the
submodules are willing to cooperate with "--shallow-submodules"
option.
Noticed-by: Vadim Eisenberg <VADIME@il.ibm.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
