Age | Commit message (Collapse) | Author |
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
|
|
Avoid making users believe they need to initialize df_conflict_entry
to something (as happened with other output only fields before) with
a quick comment and a small sanity check.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/read-tree.c has some special functionality explicitly designed
for debugging unpack-trees.[ch]. Associated with that is two fields
that no other external caller would or should use. Mark these as
internal to unpack-trees, but allow builtin/read-tree to read or write
them for this special case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch made many lines a little longer, resulting in four
becoming a bit too long. They were left as-is for the previous patch
to facilitate reviewers verifying that we were just adding "internal."
in a bunch of places, but rewrap them now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continue the work from the previous patch by finding additional fields
which are only used internally but not yet explicitly marked as such,
and include them in the internal fields struct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This just splits the two fields already marked as internal-only into a
separate internal struct. Future commits will add more fields that
were meant to be internal-only but were not explicitly marked as such
to the same struct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 2f6b1eb794 ("cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index()", 2023-01-12) mistakenly added some initialization
of a member of unpack_trees_options that was intended to be
internal-only. This initialization should be done within
update_sparsity() instead.
Note that while o->result is mostly meant for unpack_trees() and
update_sparsity() mostly operates without o->result,
check_ok_to_remove() does consult it so we need to ensure it is properly
initialized.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
struct unpack_trees_options has the following field and comment:
struct pattern_list *pl; /* for internal use */
Despite the internal-use comment, commit e091228e17 ("sparse-checkout:
update working directory in-process", 2019-11-21) starting setting this
field from an external caller. At the time, the only way around that
would have been to modify unpack_trees() to take an extra pattern_list
argument, and there's a lot of callers of that function. However, when
we split update_sparsity() off as a separate function, with
sparse-checkout being the sole caller, the need to update other callers
went away. Fix this API problem by adding a pattern_list argument to
update_sparsity() and stop setting the internal o.pl field directly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The update_sparsity() function was introduced in commit 7af7a25853
("unpack-trees: add a new update_sparsity() function", 2020-03-27).
Prior to that, unpack_trees() was used, but that had a few bugs because
the needs of the caller were different, and different enough that
unpack_trees() could not easily be modified to handle both usecases.
The implementation detail that update_sparsity() was written by copying
unpack_trees() and then streamlining it, and then modifying it in the
needed ways still shows through in that there are leftover vestiges in
both functions that are no longer needed. Clean them up. In
particular:
* update_sparsity() allows a pattern list to be passed in, but
unpack_trees() never should use a different pattern list. Add a
check and a BUG() if this gets violated.
* update_sparsity() has a check early on that will BUG() if
o->skip_sparse_checkout is set; as such, there's no need to check
for that condition again later in the code. We can simply remove
the check and its corresponding goto label.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a directory exists but has only ignored files within it and we are
trying to switch to a branch that has a file where that directory is,
the behavior depends upon --[no]-overwrite-ignore. If the user wants to
--overwrite-ignore (the default), then we should delete the ignored file
and directory and switch to the new branch.
The code to handle this in verify_clean_subdirectory() in unpack-trees
tried to handle this via paying attention to the exclude_per_dir setting
of the internal dir field. This came from commit c81935348b ("Fix
switching to a branch with D/F when current branch has file D.",
2007-03-15), which pre-dated 039bc64e88 ("core.excludesfile clean-up",
2007-11-14), and thus did not pay attention to ignore patterns from
other relevant files. Change it to use setup_standard_excludes() so
that it is also aware of excludes specified in other locations.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "repo" member was added to "the_index" in [1] the
repo_read_index() was made to populate it, but the unpopulated
"the_index" variable didn't get the same treatment.
Let's do that in initialize_the_repository() when we set it up, and
likewise for all of the current callers initialized an empty "struct
index_state".
This simplifies code that needs to deal with "the_index" or a custom
"struct index_state", we no longer need to second-guess this part of
the "index_state" deep in the stack. A recent example of such
second-guessing is the "istate->repo ? istate->repo : the_repository"
code in [2]. We can now simply use "istate->repo".
We're doing this by making use of the INDEX_STATE_INIT() macro (and
corresponding function) added in [3], which now have mandatory "repo"
arguments.
Because we now call index_state_init() in repository.c's
initialize_the_repository() we don't need to handle the case where we
have a "repo->index" whose "repo" member doesn't match the "repo"
we're setting up, i.e. the "Complete the double-reference" code in
repo_read_index() being altered here. That logic was originally added
in [1], and was working around the lack of what we now have in
initialize_the_repository().
For "fsmonitor-settings.c" we can remove the initialization of a NULL
"r" argument to "the_repository". This was added back in [4], and was
needed at the time for callers that would pass us the "r" from an
"istate->repo". Before this change such a change to
"fsmonitor-settings.c" would segfault all over the test suite (e.g. in
t0002-gitfile.sh).
This change has wider eventual implications for
"fsmonitor-settings.c". The reason the other lazy loading behavior in
it is required (starting with "if (!r->settings.fsmonitor) ..." is
because of the previously passed "r" being "NULL".
I have other local changes on top of this which move its configuration
reading to "prepare_repo_settings()" in "repo-settings.c", as we could
now start to rely on it being called for our "r". But let's leave all
of that for now, and narrowly remove this particular part of the
lazy-loading.
1. 1fd9ae517c4 (repository: add repo reference to index_state,
2021-01-23)
2. ee1f0c242ef (read-cache: add index.skipHash config option,
2023-01-06)
3. 2f6b1eb794e (cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index(), 2023-01-12)
4. 1e0ea5c4316 (fsmonitor: config settings are repository-specific,
2022-03-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hopefully in some not so distant future, we'll get advantages from always
initializing the "repo" member of the "struct index_state". To make
that easier let's introduce an initialization macro & function.
The various ad-hoc initialization of the structure can then be changed
over to it, and we can remove the various "0" assignments in
discard_index() in favor of calling index_state_init() at the end.
While not strictly necessary, let's also change the CALLOC_ARRAY() of
various "struct index_state *" to use an ALLOC_ARRAY() followed by
index_state_init() instead.
We're then adding the release_index() function and converting some
callers (including some of these allocations) over to it if they
either won't need to use their "struct index_state" again, or are just
about to call index_state_init().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the ensure_full_index() function stricter, and have it only
accept a non-NULL "struct index_state". This function (and this
behavior) was added in [1].
The only reason it needed to be this lax was due to interaction with
repo_index_has_changes(). See the addition of that code in [2].
The other reason for why this was needed dates back to interaction
with code added in [3]. In [4] we started calling ensure_full_index()
in unpack_trees(), but the caller added in 34110cd4e39 wants to pass
us a NULL "dst_index". Let's instead do the NULL check in
unpack_trees() itself.
1. 4300f8442a2 (sparse-index: implement ensure_full_index(), 2021-03-30)
2. 0c18c059a15 (read-cache: ensure full index, 2021-04-01)
3. 34110cd4e39 (Make 'unpack_trees()' have a separate source and
destination index, 2008-03-06)
4. 6863df35503 (unpack-trees: ensure full index, 2021-03-30)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
|
|
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d75793 (git: make super-prefix option, 2016-10-07)
2. e77aa336f11 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c86265576 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd9 (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7b (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131fa (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa0 (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These files are already included; we do not need to include them again
Signed-off-by: Seija Kijin <doremylover123@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add (disabled by default) option to skip the 'cache_tree_update()' at the
end of 'unpack_trees()'. In many cases, this cache tree update is redundant
because the caller of 'unpack_trees()' immediately follows it with
'prime_cache_tree()', rebuilding the entire cache tree from scratch. While
these operations aren't the most expensive part of operations like 'git
reset', the duplicate calls still create a minor unnecessary slowdown.
Introduce an option for callers to skip the 'cache_tree_update()' in
'unpack_trees()' if it is redundant (that is, if 'prime_cache_tree()' is
called afterwards). At the moment, no 'unpack_trees()' callers use the new
option; they will be updated in subsequent patches.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Segfault fix-up to an earlier fix to the topic to teach "git reset"
and "git checkout" work better in a sparse checkout.
* vd/sparse-reset-checkout-fixes:
unpack-trees: fix sparse directory recursion check
|
|
Ensure 'is_sparse_directory_entry()' receives a valid 'name_entry *' if one
exists in the list of tree(s) being unpacked in 'unpack_callback()'.
Currently, 'is_sparse_directory_entry()' is called with the first
'name_entry' in the 'names' list of entries on 'unpack_callback()'. However,
this entry may be empty even when other elements of 'names' are not (such as
when switching from an orphan branch back to a "normal" branch). As a
result, 'is_sparse_directory_entry()' could incorrectly indicate that a
sparse directory is *not* actually sparse because the name of the index
entry does not match the (empty) 'name_entry' path.
Fix the issue by using the existing 'name_entry *p' value in
'unpack_callback()', which points to the first non-empty entry in 'names'.
Because 'p' is 'const', also update 'is_sparse_directory_entry()'s
'name_entry *' argument to be 'const'.
Finally, add a regression test case.
Reported-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
* vd/sparse-reset-checkout-fixes:
unpack-trees: unpack new trees as sparse directories
cache.h: create 'index_name_pos_sparse()'
oneway_diff: handle removed sparse directories
checkout: fix nested sparse directory diff in sparse index
|
|
If 'unpack_single_entry()' is unpacking a new directory tree (that is, one
not already present in the index) into a sparse index, unpack the tree as a
sparse directory rather than traversing its contents and unpacking each file
individually. This helps keep the sparse index as collapsed as possible in
cases such as 'git reset --hard' restoring a outside-of-cone directory
removed with 'git rm -r --sparse'.
Without this patch, 'unpack_single_entry()' will only unpack a directory
into the index as a sparse directory (rather than traversing into it and
unpacking its files one-by-one) if an entry with the same name already
exists in the index. This patch allows sparse directory unpacking without a
matching index entry when the following conditions are met:
1. the directory's path is outside the sparse cone, and
2. there are no children of the directory in the index
If a directory meets these requirements (as determined by
'is_new_sparse_dir()'), 'unpack_single_entry()' unpacks the sparse directory
index entry and propagates the decision back up to 'unpack_callback()' to
prevent unnecessary tree traversal into the unpacked directory.
Reported-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
|
|
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
|
|
Initialize `o->result.fsmonitor_has_run_once` based upon value
in `o->src_index->fsmonitor_has_run_once` to prevent a second
fsmonitor query during the tree traversal and possibly getting
a skewed view of the working directory.
The checkout code has already talked to the fsmonitor and the
traversal is updating the index as it traverses, so there is
no need to query the fsmonitor.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When modifying the sparse-checkout definition, the sparse-checkout
builtin calls update_sparsity() to modify the SKIP_WORKTREE bits of all
cache entries in the index. Before, we needed the index to be fully
expanded in order to ensure we had the full list of files necessary that
match the new patterns.
Insert a call to reset_sparse_directories() that expands sparse
directories that are within the new pattern list, but only far enough
that every necessary file path now exists as a cache entry. The
remaining logic within update_sparsity() will modify the SKIP_WORKTREE
bits appropriately.
This allows us to disable command_requires_full_index within the
sparse-checkout builtin. Add tests that demonstrate that we are not
expanding to a full index unnecessarily.
We can see the improved performance in the p2000 test script:
Test HEAD~1 HEAD
------------------------------------------------------------------------
2000.24: git ... (sparse-v3) 2.14(1.55+0.58) 1.57(1.03+0.53) -26.6%
2000.25: git ... (sparse-v4) 2.20(1.62+0.57) 1.58(0.98+0.59) -28.2%
These reductions of 26-28% are small compared to most examples, but the
time is dominated by writing a new copy of the base repository to the
worktree and then deleting it again. The fact that the previous index
expansion was such a large portion of the time is telling how important
it is to complete this sparse index integration.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When unpacking trees, set the default sparsity of the resultant index based
on repo settings and 'is_sparse_index_allowed()'.
Normally, when executing 'unpack_trees', the output index is marked sparse
when (and only when) it unpacks a sparse directory. However, an index may be
"sparse" even if it contains no sparse directories - when all files fall
inside the sparse-checkout definition or otherwise have SKIP_WORKTREE
disabled. Therefore, the output index may be marked "full" even when it is
"sparse", resulting in unnecessary 'ensure_full_index' calls when writing to
disk. Avoid this by setting the "default" index sparsity to match what is
expected for the repository.
As a consequence of this fix, the (non-merge) 'read-tree' performed when
applying a stash with untracked files no longer expands the index. Update
the corresponding test in 't1092'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit f2a454e0a5 (unpack-trees: improve performance of
next_cache_entry, 2021-11-29).
The "hint" value was originally needed to improve performance in 'git reset
-- <pathspec>' caused by 'cache_bottom' lagging behind its correct value
when using a sparse index. The 'cache_bottom' tracking has since been
corrected, removing the need for an additional "pseudo-cache_bottom"
tracking variable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct tracking of the 'cache_bottom' for cases where sparse directories
are present in the index.
BACKGROUND
----------
The 'unpack_trees_options.cache_bottom' is a variable that tracks the
in-progress "bottom" of the cache as 'unpack_trees()' iterates through the
contents of the index. Most importantly, this value informs the sequential
return values of 'next_cache_entry()' which, in the "diff cache" usage of
'unpack_callback()', are either unpacked as-is or are passed into the diff
machinery.
The 'cache_bottom' is intended to track the position of the first entry in
the index that has not yet been diffed or unpacked. It is advanced in two
main ways: either it is incremented when an index entry is marked as "used"
(in 'mark_ce_used()'), indicating that it was unpacked or diffed, or when a
directory is unpacked, in which case it is increased by an amount equaling
the number of index entries inside that tree.
In 17a1bb570b (unpack-trees: preserve cache_bottom, 2021-07-14), it was
identified that sparse directories posed a problem to the above
'cache_bottom' advancement logic - because a sparse directory was both an
index entry that could be "used" and a directory that can be unpacked, the
'cache_bottom' would be incremented too many times. To solve this problem,
the 'mark_ce_used()' advancement of 'cache_bottom' was skipped for sparse
directories.
INCORRECT CACHE_BOTTOM TRACKING
-------------------------------
Skipping the 'cache_bottom' advancement for sparse directories in
'mark_ce_used()' breaks down in two cases:
1. When the 'unpack_trees()' operation is *not* a "cache diff" (because the
directory contents-based incrementing of 'cache_bottom' does not happen).
2. When a cache diff is performed with a pathspec (because
'unpack_index_entry()' will unpack a sparse directory not matched by the
pathspec without performing the directory contents-based increment).
The former luckily does not appear to affect 'git' behavior, likely because
'cache_bottom' is largely unused (non-"cache diff" 'unpack_trees()' uses
'find_index_entry()' - rather than 'next_cache_entry()' - to find the index
entries to unpack).
The latter, however, causes 'cache_bottom' to "lag behind" its intended
position by an amount equal to the number of sparse directories unpacked so
far with 'unpack_index_entry()'. If a repository is structured such that any
sparse directories are ordered lexicographically *after* any
pathspec-matching directories, though, this issue won't present any adverse
behavior.
This was the case with the 't1092-sparse-checkout-compatibility.sh' tests
before the addition of the 'before/' sparse directory (ordered *before* the
in-cone 'deep/' directory), therefore sidestepping the issue. Once the
'before/' directory was added, though, 'cache_bottom' began to lag behind
its intended position, causing 'next_cache_entry()' to return index entries
it had already processed and, ultimately, an incorrect diff.
CORRECTING CACHE_BOTTOM
-----------------------
The problems observed in 't1092' come from 'cache_bottom' lagging behind in
cases where the cache tree-based advancement doesn't occur. To solve this,
then, the fix in 17a1bb570b is "reversed"; rather than skipping
'cache_bottom' advancement in 'mark_ce_used()', we skip the directory
contents-based advancement for sparse directories. Now, every index entry
can be accounted for in 'cache_bottom':
* if you're working with a single index entry, 'cache_bottom' is incremented
in 'mark_ce_used()'
* if you're working with a directory that contains index entries (but is not
one itself), 'cache_bottom' is incremented by the number of entries in
that directory.
Finally, change the 'test_expect_failure' tests in 't1092' failing due to
this bug back to 'test_expect_success'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
|
|
Enable use of 'merged_sparse_dir' in 'threeway_merge'. As with two-way
merge, the contents of each conflicted sparse directory are merged without
referencing the index, avoiding sparse index expansion.
As with two-way merge, the 't/t1092-sparse-checkout-compatibility.sh' test
'read-tree --merge with edit/edit conflicts in sparse directories' confirms
that three-way merges with edit/edit changes (both with and without
conflicts) inside a sparse directory result in the correct index state or
error message. To ensure the index is not unnecessarily expanded, add
three-way merge cases to 'sparse index is not expanded: read-tree'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable two-way merge with 'git read-tree' without expanding the sparse
index. When in a sparse index, a two-way merge will trivially succeed as
long as there are not changes to the same sparse directory in multiple trees
(i.e., sparse directory-level "edit-edit" conflicts). If there are such
conflicts, the merge will fail despite the possibility that individual files
could merge cleanly.
In order to resolve these "edit-edit" conflicts, "conflicted" sparse
directories are - rather than rejected - merged by traversing their
associated trees by OID. For each child of the sparse directory:
1. Files are merged as normal (see Documentation/git-read-tree.txt for
details).
2. Subdirectories are treated as sparse directories and merged in
'twoway_merge'. If there are no conflicts, they are merged according to
the rules in Documentation/git-read-tree.txt; otherwise, the subdirectory
is recursively traversed and merged.
This process allows sparse directories to be individually merged at the
necessary depth *without* expanding a full index.
The 't/t1092-sparse-checkout-compatibility.sh' test 'read-tree --merge with
edit/edit conflicts in sparse directories' tests two-way merges with 1)
changes inside sparse directories that do not conflict and 2) changes that
do conflict (with the correct file(s) reported in the error message).
Additionally, add two-way merge cases to 'sparse index is not expanded:
read-tree' to confirm that the index is not expanded regardless of whether
edit/edit conflicts are present in a sparse directory.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git read-tree' is provided with a prefix, expand the index only if the
prefix is equivalent to a sparse directory or contained within one. If the
index is not expanded in these cases, 'ce_in_traverse_path' will indicate
that the relevant sparse directory is not in the prefix/traverse path,
skipping past it and not unpacking the appropriate tree(s).
If the prefix is in-cone, its sparse subdirectories (if any) will be
traversed correctly without index expansion.
The behavior of 'git read-tree' with prefixes 1) inside of cone, 2) equal to
a sparse directory, and 3) inside a sparse directory are all tested as part
of the 't/t1092-sparse-checkout-compatibility.sh' test 'read-tree --prefix',
ensuring that the sparse index case works the way it did prior to this
change as well as matching non-sparse index sparse-checkout.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For sparse-checkouts, we don't want unpack-trees to error out on files
that are missing from the worktree, so there has traditionally been
logic to make it skip the verify_uptodate() check for these.
Unfortunately, it was skipping the verify_uptodate() check for files
that were expected to *become* SKIP_WORKTREE. For files that were not
already SKIP_WORKTREE, that can cause us to later delete the file in
apply_sparse_checkout(). Only skip the check for files that were
already SKIP_WORKTREE as well to avoid lightly discarding important
changes users may have made to files.
Note 1: unpack-trees.c is already a bit complex, and the logic around
CE_SKIP_WORKTREE and CE_NEW_SKIP_WORKTREE in that file are no exception.
I also tried just replacing CE_NEW_SKIP_WORKTREE with CE_SKIP_WORKTREE
in the verify_uptodate() check instead of checking for both flags, and
found that it also fixed this bug and passed all the tests. I also
attempted to devise a few testcases that might trip either variant of my
fix and was unable to find any problems. It may be that just checking
CE_SKIP_WORKTREE is a better fix, but I'm not sure. I thought it
was a bit safer to strictly reduce the number of cases where we skip the
up-to-date check rather than just toggling which kind of cases skip it,
and thus went with the current variant of the fix.
Note 2: I also wondered if verify_absent() might have a similar bug, but
despite my attempts to try to devise a testcase that would trigger such
a thing, I couldn't find any problematic testcases. Thus, this patch
makes no attempt to apply similar changes to verify_absent() and
verify_absent_if_directory().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
|
|
The sparse-index/sparse-checkout feature had a bug in its use of
the matching code to determine which path is in or outside the
sparse checkout patterns.
* ds/sparse-deep-pattern-checkout-fix:
unpack-trees: use traverse_path instead of name
t1092: add deeper changes during a checkout
|
|
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
|
|
When running commands such as `git reset --hard` from a subdirectory, if
that subdirectory is in the way of adding needed files, bail with an
error message.
Note that this change looks kind of like it duplicates the new lines of
code from the previous commit in verify_clean_subdirectory(). However,
when we are preserving untracked files, we would rather any error
messages about untracked files being in the way take precedence over
error messages about a subdirectory that happens to be the_original_cwd
being in the way. But in the UNPACK_RESET_OVERWRITE_UNTRACKED case,
there is no untracked checking to be done, so we simply add a special
case near the top of verify_absent_1.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the past, when a directory needs to be removed to make room for a
file, we have always errored out when that directory contains any
untracked (but not ignored) files. Add an extra condition on that: also
error out if the directory is the current working directory we inherited
from our parent process.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse_dir_matches_path() method compares a cache entry that is a
sparse directory entry against a 'struct traverse_info *info' and a
'struct name_entry *p' to see if the cache entry has exactly the right
name for those other inputs.
This method was introduced in 523506d (unpack-trees: unpack sparse
directory entries, 2021-07-14), but included a significant mistake. The
path comparisons used 'info->name' instead of 'info->traverse_path'.
Since 'info->name' only stores a single tree entry name while
'info->traverse_path' stores the full path from root, this method does
not work when 'info' is in a subdirectory of a directory. Replacing the
right strings and their corresponding lengths make the method work
properly.
The previous change included a failing test that exposes this issue.
That test now passes. The critical detail is that as we go deep into
unpack_trees(), the logic for merging a sparse directory entry with a
tree entry during 'git checkout' relies on this
sparse_dir_matches_path() in order to avoid calling
traverse_trees_recursive() during unpack_callback() in this hunk:
if (!is_sparse_directory_entry(src[0], names, info) &&
traverse_trees_recursive(n, dirmask, mask & ~dirmask,
names, info) < 0) {
return -1;
}
For deep paths, the short-circuit never occurred and
traverse_trees_recursive() was being called incorrectly and that was
causing other strange issues. Specifically, the error message from the
now-passing test previously included this:
error: Your local changes to the following files would be overwritten by checkout:
deep/deeper1/deepest2/a
deep/deeper1/deepest3/a
Please commit your changes or stash them before you switch branches.
Aborting
These messages occurred because the 'current' cache entry in
twoway_merge() was showing as NULL because the index did not contain
entries for the paths contained within the sparse directory entries. We
instead had 'oldtree' given as the entry at HEAD and 'newtree' as the
entry in the target tree. This led to reject_merge() listing these
paths.
Now that sparse_dir_matches_path() works the same for deep paths as it
does for shallow depths, the rest of the logic kicks in to properly
handle modifying the sparse directory entries as designed.
Reported-by: Gustave Granroth <gus.gran@gmail.com>
Reported-by: Mike Marcelais <michmarc@exchange.microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To find the first non-unpacked cache entry, `next_cache_entry` iterates
through index, starting at `cache_bottom`. The performance of this in full
indexes is helped by `cache_bottom` advancing with each invocation of
`mark_ce_used` (called by `unpack_index_entry`). However, the presence of
sparse directories can prevent the `cache_bottom` from advancing in a sparse
index case, effectively forcing `next_cache_entry` to search from the
beginning of the index each time it is called.
The `cache_bottom` must be preserved for the sparse index (see 17a1bb570b
(unpack-trees: preserve cache_bottom, 2021-07-14)). Therefore, to retain the
benefit `cache_bottom` provides in non-sparse index cases, a separate `hint`
position indicates the first position `next_cache_entry` should search,
updated each execution with a new position.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* ab/unpack-trees-leakfix:
sequencer: fix a memory leak in do_reset()
sequencer: add a "goto cleanup" to do_reset()
unpack-trees: don't leak memory in verify_clean_subdirectory()
|
|
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
|
|
Fix two different but related memory leaks in
verify_clean_subdirectory(). We leaked both the "pathbuf" if
read_directory() returned non-zero, and we never cleaned up our own
"struct dir_struct" either.
* "pathbuf": When the read_directory() call followed by the
free(pathbuf) was added in c81935348be (Fix switching to a branch
with D/F when current branch has file D., 2007-03-15) we didn't
bother to free() before we called die().
But when this code was later libified in 203a2fe1170 (Allow callers
of unpack_trees() to handle failure, 2008-02-07) we started to leak
as we returned data to the caller. This fixes that memory leak,
which can be observed under SANITIZE=leak with e.g. the
"t1001-read-tree-m-2way.sh" test.
* "struct dir_struct": We've leaked the dir_struct ever since this
code was added back in c81935348be.
When that commit was written there wasn't an equivalent of
dir_clear(). Since it was added in 270be816049 (dir.c: provide
clear_directory() for reclaiming dir_struct memory, 2013-01-06)
we've omitted freeing the memory allocated here.
This memory leak could also be observed under SANITIZE=leak and the
"t1001-read-tree-m-2way.sh" test.
This makes all the test in "t1001-read-tree-m-2way.sh" pass under
"GIT_TEST_PASSING_SANITIZE_LEAK=true", we'd previously die in tests
25, 26 & 28.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid accidental misuse or confusion over ownership by clearly making
unpack_trees_options.dir an internal-only variable.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|