From 30eba7bf2caa327b4251d66bf7157dda97512e96 Mon Sep 17 00:00:00 2001 From: Christian Couder Date: Fri, 6 Jun 2008 09:07:28 +0200 Subject: documentation: convert "diffcore" and "repository-layout" to man pages This patch renames the following documents and at the same time converts them to the man format: diffcore.txt -> gitdiffcore.txt (man section 7) repository-layout.txt -> gitrepository-layout.txt (man section 5) Other documents that reference the above ones are changed accordingly. Signed-off-by: Christian Couder Signed-off-by: Junio C Hamano --- Documentation/gitdiffcore.txt | 292 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 Documentation/gitdiffcore.txt (limited to 'Documentation/gitdiffcore.txt') diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt new file mode 100644 index 0000000000..f68efed4c3 --- /dev/null +++ b/Documentation/gitdiffcore.txt @@ -0,0 +1,292 @@ +gitdiffcore(7) +============== + +NAME +---- +gitdiffcore - Tweaking diff output (June 2005) + +SYNOPSIS +-------- +git diff * + +DESCRIPTION +----------- + +The diff commands git-diff-index, git-diff-files, and git-diff-tree +can be told to manipulate differences they find in +unconventional ways before showing diff(1) output. The manipulation +is collectively called "diffcore transformation". This short note +describes what they are and how to use them to produce diff outputs +that are easier to understand than the conventional kind. + + +The chain of operation +---------------------- + +The git-diff-* family works by first comparing two sets of +files: + + - git-diff-index compares contents of a "tree" object and the + working directory (when '\--cached' flag is not used) or a + "tree" object and the index file (when '\--cached' flag is + used); + + - git-diff-files compares contents of the index file and the + working directory; + + - git-diff-tree compares contents of two "tree" objects; + +In all of these cases, the commands themselves compare +corresponding paths in the two sets of files. The result of +comparison is passed from these commands to what is internally +called "diffcore", in a format similar to what is output when +the -p option is not used. E.g. + +------------------------------------------------ +in-place edit :100644 100644 bcd1234... 0123456... M file0 +create :000000 100644 0000000... 1234567... A file4 +delete :100644 000000 1234567... 0000000... D file5 +unmerged :000000 000000 0000000... 0000000... U file6 +------------------------------------------------ + +The diffcore mechanism is fed a list of such comparison results +(each of which is called "filepair", although at this point each +of them talks about a single file), and transforms such a list +into another list. There are currently 6 such transformations: + +- diffcore-pathspec +- diffcore-break +- diffcore-rename +- diffcore-merge-broken +- diffcore-pickaxe +- diffcore-order + +These are applied in sequence. The set of filepairs git-diff-\* +commands find are used as the input to diffcore-pathspec, and +the output from diffcore-pathspec is used as the input to the +next transformation. The final result is then passed to the +output routine and generates either diff-raw format (see Output +format sections of the manual for git-diff-\* commands) or +diff-patch format. + + +diffcore-pathspec: For Ignoring Files Outside Our Consideration +--------------------------------------------------------------- + +The first transformation in the chain is diffcore-pathspec, and +is controlled by giving the pathname parameters to the +git-diff-* commands on the command line. The pathspec is used +to limit the world diff operates in. It removes the filepairs +outside the specified set of pathnames. E.g. If the input set +of filepairs included: + +------------------------------------------------ +:100644 100644 bcd1234... 0123456... M junkfile +------------------------------------------------ + +but the command invocation was "git-diff-files myfile", then the +junkfile entry would be removed from the list because only "myfile" +is under consideration. + +Implementation note. For performance reasons, git-diff-tree +uses the pathname parameters on the command line to cull set of +filepairs it feeds the diffcore mechanism itself, and does not +use diffcore-pathspec, but the end result is the same. + + +diffcore-break: For Splitting Up "Complete Rewrites" +---------------------------------------------------- + +The second transformation in the chain is diffcore-break, and is +controlled by the -B option to the git-diff-* commands. This is +used to detect a filepair that represents "complete rewrite" and +break such filepair into two filepairs that represent delete and +create. E.g. If the input contained this filepair: + +------------------------------------------------ +:100644 100644 bcd1234... 0123456... M file0 +------------------------------------------------ + +and if it detects that the file "file0" is completely rewritten, +it changes it to: + +------------------------------------------------ +:100644 000000 bcd1234... 0000000... D file0 +:000000 100644 0000000... 0123456... A file0 +------------------------------------------------ + +For the purpose of breaking a filepair, diffcore-break examines +the extent of changes between the contents of the files before +and after modification (i.e. the contents that have "bcd1234..." +and "0123456..." as their SHA1 content ID, in the above +example). The amount of deletion of original contents and +insertion of new material are added together, and if it exceeds +the "break score", the filepair is broken into two. The break +score defaults to 50% of the size of the smaller of the original +and the result (i.e. if the edit shrinks the file, the size of +the result is used; if the edit lengthens the file, the size of +the original is used), and can be customized by giving a number +after "-B" option (e.g. "-B75" to tell it to use 75%). + + +diffcore-rename: For Detection Renames and Copies +------------------------------------------------- + +This transformation is used to detect renames and copies, and is +controlled by the -M option (to detect renames) and the -C option +(to detect copies as well) to the git-diff-* commands. If the +input contained these filepairs: + +------------------------------------------------ +:100644 000000 0123456... 0000000... D fileX +:000000 100644 0000000... 0123456... A file0 +------------------------------------------------ + +and the contents of the deleted file fileX is similar enough to +the contents of the created file file0, then rename detection +merges these filepairs and creates: + +------------------------------------------------ +:100644 100644 0123456... 0123456... R100 fileX file0 +------------------------------------------------ + +When the "-C" option is used, the original contents of modified files, +and deleted files (and also unmodified files, if the +"\--find-copies-harder" option is used) are considered as candidates +of the source files in rename/copy operation. If the input were like +these filepairs, that talk about a modified file fileY and a newly +created file file0: + +------------------------------------------------ +:100644 100644 0123456... 1234567... M fileY +:000000 100644 0000000... bcd3456... A file0 +------------------------------------------------ + +the original contents of fileY and the resulting contents of +file0 are compared, and if they are similar enough, they are +changed to: + +------------------------------------------------ +:100644 100644 0123456... 1234567... M fileY +:100644 100644 0123456... bcd3456... C100 fileY file0 +------------------------------------------------ + +In both rename and copy detection, the same "extent of changes" +algorithm used in diffcore-break is used to determine if two +files are "similar enough", and can be customized to use +a similarity score different from the default of 50% by giving a +number after the "-M" or "-C" option (e.g. "-M8" to tell it to use +8/10 = 80%). + +Note. When the "-C" option is used with `\--find-copies-harder` +option, git-diff-\* commands feed unmodified filepairs to +diffcore mechanism as well as modified ones. This lets the copy +detector consider unmodified files as copy source candidates at +the expense of making it slower. Without `\--find-copies-harder`, +git-diff-\* commands can detect copies only if the file that was +copied happened to have been modified in the same changeset. + + +diffcore-merge-broken: For Putting "Complete Rewrites" Back Together +-------------------------------------------------------------------- + +This transformation is used to merge filepairs broken by +diffcore-break, and not transformed into rename/copy by +diffcore-rename, back into a single modification. This always +runs when diffcore-break is used. + +For the purpose of merging broken filepairs back, it uses a +different "extent of changes" computation from the ones used by +diffcore-break and diffcore-rename. It counts only the deletion +from the original, and does not count insertion. If you removed +only 10 lines from a 100-line document, even if you added 910 +new lines to make a new 1000-line document, you did not do a +complete rewrite. diffcore-break breaks such a case in order to +help diffcore-rename to consider such filepairs as candidate of +rename/copy detection, but if filepairs broken that way were not +matched with other filepairs to create rename/copy, then this +transformation merges them back into the original +"modification". + +The "extent of changes" parameter can be tweaked from the +default 80% (that is, unless more than 80% of the original +material is deleted, the broken pairs are merged back into a +single modification) by giving a second number to -B option, +like these: + +* -B50/60 (give 50% "break score" to diffcore-break, use 60% + for diffcore-merge-broken). + +* -B/60 (the same as above, since diffcore-break defaults to 50%). + +Note that earlier implementation left a broken pair as a separate +creation and deletion patches. This was an unnecessary hack and +the latest implementation always merges all the broken pairs +back into modifications, but the resulting patch output is +formatted differently for easier review in case of such +a complete rewrite by showing the entire contents of old version +prefixed with '-', followed by the entire contents of new +version prefixed with '+'. + + +diffcore-pickaxe: For Detecting Addition/Deletion of Specified String +--------------------------------------------------------------------- + +This transformation is used to find filepairs that represent +changes that touch a specified string, and is controlled by the +-S option and the `\--pickaxe-all` option to the git-diff-* +commands. + +When diffcore-pickaxe is in use, it checks if there are +filepairs whose "original" side has the specified string and +whose "result" side does not. Such a filepair represents "the +string appeared in this changeset". It also checks for the +opposite case that loses the specified string. + +When `\--pickaxe-all` is not in effect, diffcore-pickaxe leaves +only such filepairs that touch the specified string in its +output. When `\--pickaxe-all` is used, diffcore-pickaxe leaves all +filepairs intact if there is such a filepair, or makes the +output empty otherwise. The latter behaviour is designed to +make reviewing of the changes in the context of the whole +changeset easier. + + +diffcore-order: For Sorting the Output Based on Filenames +--------------------------------------------------------- + +This is used to reorder the filepairs according to the user's +(or project's) taste, and is controlled by the -O option to the +git-diff-* commands. + +This takes a text file each of whose lines is a shell glob +pattern. Filepairs that match a glob pattern on an earlier line +in the file are output before ones that match a later line, and +filepairs that do not match any glob pattern are output last. + +As an example, a typical orderfile for the core git probably +would look like this: + +------------------------------------------------ +README +Makefile +Documentation +*.h +*.c +t +------------------------------------------------ + +SEE ALSO +-------- +linkgit:git-diff[1], +linkgit:git-diff-files[1], +linkgit:git-diff-index[1], +linkgit:git-diff-tree[1], +linkgit:git-format-patch[1], +linkgit:git-log[1], +linkgit:gitglossary[7], +link:user-manual.html[The Git User's Manual] + +GIT +--- +Part of the linkgit:git[7] suite. -- cgit v1.2.3