| Age | Commit message (Collapse) | Author |
|---|
|
This allows different filter implementations to be specified in the
configuration file. Currently only "exec" is supported, but it may now
be specified either with or without the "exec:" prefix.
Signed-off-by: John Keeping <john@keeping.me.uk>
|
|
So that people wishing to use "enable-http-clone" don't have to find
out the correct settings on their own.
Signed-off-by: Přemysl Janouch <p.janouch@gmail.com>
|
|
"enable-git-clone" doesn't exist, replaced with "enable-http-clone".
Signed-off-by: Přemysl Janouch <p.janouch@gmail.com>
|
|
Signed-off-by: Přemysl Janouch <p.janouch@gmail.com>
|
|
|
|
|
|
We've long supported negative ttls, for infinite cache, except the
documentation incorrectly showed one of our defaults as being 5 and not
-1. As well, with a negative ttl, we were actually making the HTTP
expired header go backwards. This changes it to go ahead ten years
instead.
Further, we add an cache-about-ttl option to set a different ttl for
about pages, which are now increasingly being filtered through markdown
or just sent statically anyway.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Now this is possible in cgitrc -
readme=:README.md
readme=:readme.md
readme=:README.mkd
readme=:readme.mkd
readme=:README.rst
readme=:readme.rst
readme=:README.html
readme=:readme.html
readme=:README.htm
readme=:readme.htm
readme=:README.txt
readme=:readme.txt
readme=:README
readme=:readme
readme=:INSTALL.txt
readme=:install.txt
readme=:INSTALL
readme=:install
Suggested-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This gives the about-filter API the same semantics as source-filter,
where the filter receives the filename so it can decide what to do next
with it.
While we're at it, plug a memory leak.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
If the readme value begins with ":", and has no specified branch before
it, use the repository's default branch.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Several options must be specified prior to scan-path. This is consistant
source of user confusion. Document these facts.
Suggested-by: Lukas Fleischer <cgit@cryptocrack.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When set to "name", branches are sorted by name, which is the current
default. When set to "age", branches are sorted by the age of the
repository.
This feature was requested by Konstantin Ryabitsev for use on
kernel.org.
Proposed-by: Konstantin Ryabitsev <mricon@kernel.org>
|
|
This is not really needed for personal sites where all repos belong to
the same person. Since it is pretty useful for shared sites however, it
should be configurable.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
|
|
|
|
|
|
This makes it possible to use strict commit date ordering or strict
topological ordering by passing the corresponding flags to "git log".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Flag which, when set to "1", will sort the sections on the repository
listing by name. Set this flag to "0" if the order in the cgitrc file
should be preserved. Default value: "1".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
After some back and forth with Jamie and René, it looks like the git
config semantics are going to be like this:
- gitweb.category maps to the cgit repo config key "section"
- gitweb.description maps to the cgit repo config key "desc"
- gitweb.owner maps to the cgit repo config key "owner"
- cgit.* maps to all cgit repo config keys
This option can be enabled with "enable-git-config=1", and replaces
all previous "enable-gitweb-*" config keys.
The order of operations is as follows:
- git config settings are applied in the order that they exist in
the git config file
- if the owner is not set from git config, get the owner using the
usual getpwuid call
- if the description is not set from git config, look inside the
static $path/description file
- if section-from-path=1, override whatever previous settings were
inside of git config using the section-from-path logic
- parse $path/cgitrc for local repo.* settings, that override all
previous settings
|
|
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Add two options, one for doing the ordinary name sorts in a
case-insensitive manner, and another for choosing to sort repos in each
section by age instead of by name.
|
|
Use gitweb.category from git config to determine repo's section, if
option is enabled.
|
|
Use gitweb.description instead of description file to determine
description, if option is enabled.
|
|
|
|
|
|
|
|
Some setenv() implementations (e.g. the one in OpenBSD's stdlib)
segfault if we pass a NULL value. Only set environment variables if the
corresponding settings are defined to avoid this.
Note that this is a minor behaviour change as environment variables were
supposed to be set to an empty string if a setting was undefined. Given
that this feature isn't part of any official release yet, there's no
need to worry about backwards compatibility, really. Change the
documentation accordingly.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
|
|
For sites that do not want to configure mime types by hand but
still want the correct mime type for 'plain' blobs, configuring
a mime type file is made possible. This is handy since such a
file is normally already provided (at least on Linux systems).
Also, this reflects the gitweb option '$mimetypes_file'
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This is a saner alternative than hardcoding the default branch to be
"master". The add_repo() function will now check for a symbolic ref in
repo_path/HEAD. If there is a suitable one, overwrite repo->defbranch
with it. Note that you'll need to strip the newline from the file (->
len-17).
If HEAD is a symbolic link pointing directly to a branch below
refs/heads/, do a readlink() instead to find the ref name.
Signed-off-by: Julius Plenz <plenz@cis.fu-berlin.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The old default value was an abomination which never should have been
allowed to see the light of day.
This patch removes the default, which is a backwards incompatible change
with low probability of causing anyone any real trouble (a repo with
submodules, displayed by cgit using the default value of `module-link`,
is very unlikely to actually generate working links).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The current 'repo.module-link' option is sufficient when all gitlinks
in a repository can be converted to commit links in a uniform way, but
not when different submodules/paths needs different settings.
This patch adds support for 'repo.module-link.<path>', which will be
used for linking to submodules at paths matching one such entry.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
|
|
The global module-link option can be overridden per repo, but this has
never been documented.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
The current 'clone-prefix' setting has some known issues:
* All repos get the same 'clone-prefix' value since the setting is not
adopted during repo registration (in cgitrc, or during scan-path traversal),
but only when the setting is used.
* The generated clone-urls for a repo is a combination of 'clone-prefix', a
slash and the repo url. This doesn't work well with e.g. ssh-style urls
like 'git@example.org:repo.git', since the inserted slash will make the
repo relative to the filesystem root.
* If 'remove-suffix' is enabled, the generated clone-urls will not work for
cloning (except for http-urls to cgit itself) since they miss the '.git'
suffix.
The new 'clone-url' setting is designed to avoid the mentioned issues:
* Each repo adopts the default 'clone-url' when the repo is defined. This
allows different groups of repos to adopt different values.
* The clone-urls for a repo is generated by expanding environment variables
in a string template without inserting arbitrary characters, hence any
kind of clone-url can be generated.
* Macro expansion also eases the 'remove-suffix' pain since it's now
possible to define e.g. 'clone-url=git://foo.org/$CGIT_REPO_URL.git' for
a set of repos. A furter improvement would be to define e.g.
$CGIT_REPO_SUFFIX to '.git' for all repos which had their url prettified,
or to store the original $CGIT_REPO_URL in e.g. $CGIT_REPO_REAL_URL before
suffix removal.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
This patch makes the generated man-page for the filer api section more
similar to the other sections. Also, the bulleted list of environment
variables wasn't rendered correctly (with asciidoc 8.5.2), without an
empty line before the first item.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Conflicts:
cgitrc.5.txt
|
|
This is a new feature in cgit-0.9 which was formerly undocumented.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Conflicts:
cgit.c
|
|
|
|
Signed-off-by: Julius Plenz <plenz@cis.fu-berlin.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
When tar.xz support was added in 0642435fed (2009-12-08: Add
.tar.xz-snapshot support), cgitrc.5 was not updated to match. This
patch fixes the issue.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
If advertising other URLs to your users, you may not want to make this
available through cgit (e.g. if you have the smart HTTP transport set up
elsewhere). Allow disabling the three magic commands that simulate the
git server, but default it to enabled.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
* br/misc:
Use transparent background for the cgit logo
ssdiff: anchors for ssdiff
implement repo.logo and repo.logo-link
|
|
Allow for per repo logo and logo-link; Use global logo and logo-link per
default.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
|
|
* jh/scan-path:
scan_path(): Do not recurse into hidden directories by default
scan_path(): Improve handling of inaccessible directories
|
|
Paths that start with a period ('.') are considered hidden in the Unix world.
scan_path() should arguably not recurse into these directories by default.
This patch makes it so, and introduces the "scan-hidden-path" config variable
for overriding the new default and revert to the old behaviour (scanning _all_
directories, including hidden .directories).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
|
