diff options
Diffstat (limited to 'lib/flipper_file/flipper_file.h')
-rw-r--r-- | lib/flipper_file/flipper_file.h | 465 |
1 files changed, 0 insertions, 465 deletions
diff --git a/lib/flipper_file/flipper_file.h b/lib/flipper_file/flipper_file.h deleted file mode 100644 index 0a8c3c9e..00000000 --- a/lib/flipper_file/flipper_file.h +++ /dev/null @@ -1,465 +0,0 @@ -/** - * @file flipper-file.h - * Flipper File Format helper library. - * - * Flipper File Format is a fairly simple format for storing data in a file. - * - * Flipper file structure: - * - * ~~~~~~~~~~~~~~~~~~~~~ - * # Commentary - * Field name: field value - * ~~~~~~~~~~~~~~~~~~~~~ - * - * Lines starting with the # character are ignored (considered as comments). The separator between the name of the value and the value itself is the string ": ". - * - * Currently supported types: - * - * ~~~~~~~~~~~~~~~~~~~~~ - * String: text - * Int32: 1 2 -3 4 - * Uint32: 1 2 3 4 - * Float: 1.0 1234.654 - * Hex: A4 B3 C2 D1 12 FF - * ~~~~~~~~~~~~~~~~~~~~~ - * - * End of line is LF when writing, but CR is supported when reading. - * - * The library is designed in such a way that comments and field values are completely ignored when searching for keys, that is, they do not consume memory. - * - * File example: - * - * ~~~~~~~~~~~~~~~~~~~~~ - * Filetype: Flipper Test File - * Version: 1 - * # Just test file - * String: String value - * UINT: 1234 - * Hex: 00 01 FF A3 - * ~~~~~~~~~~~~~~~~~~~~~ - * - * Writing: - * - * ~~~~~~~~~~~~~~~~~~~~~ - * FlipperFile file = flipper_file_alloc(storage); - * - * do { - * const uint32_t version = 1; - * const char* string_value = "String value"; - * const uint32_t uint32_value = 1234; - * const uint16_t array_size = 4; - * const uint8_t* array[array_size] = {0x00, 0x01, 0xFF, 0xA3}; - * - * if(!flipper_file_open_new(file, "/ext/flipper_file_test")) break; - * if(!flipper_file_write_header_cstr(file, "Flipper Test File", version)) break; - * if(!flipper_file_write_comment_cstr(file, "Just test file")) break; - * if(!flipper_file_write_string_cstr(file, "String", string_value)) break; - * if(!flipper_file_flipper_file_write_uint32(file, "UINT", &uint32_value, 1)) break; - * if(!flipper_file_write_hex(file, "Hex Array", array, array_size)) break; - * - * // signal that the file was written successfully - * } while(0); - * - * flipper_file_close(file); - * flipper_file_free(file); - * ~~~~~~~~~~~~~~~~~~~~~ - * - * Reading: - * - * ~~~~~~~~~~~~~~~~~~~~~ - * FlipperFile file = flipper_file_alloc(storage); - * - * do { - * uint32_t version = 1; - * string_t file_type; - * string_t string_value; - * uint32_t uint32_value = 1; - * uint16_t array_size = 4; - * uint8_t* array[array_size] = {0}; - * string_init(file_type); - * string_init(string_value); - * - * if(!flipper_file_open_existing(file, "/ext/flipper_file_test")) break; - * if(!flipper_file_read_header(file, file_type, &version)) break; - * if(!flipper_file_read_string(file, "String", string_value)) break; - * if(!flipper_file_read_uint32(file, "UINT", &uint32_value, 1)) break; - * if(!flipper_file_read_hex(file, "Hex Array", array, array_size)) break; - * - * // signal that the file was read successfully - * } while(0); - * - * flipper_file_close(file); - * flipper_file_free(file); - * ~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#pragma once -#include <stdint.h> -#include <mlib/m-string.h> -#include <storage/storage.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/** FlipperFile type anonymous structure. */ -typedef struct FlipperFile FlipperFile; - -/** - * Allocate FlipperFile. - * @param storage storage api - * @return FlipperFile* Pointer to a FlipperFile instance - */ -FlipperFile* flipper_file_alloc(Storage* storage); - -/** - * Free FlipperFile. - * @param flipper_file Pointer to a FlipperFile instance - */ -void flipper_file_free(FlipperFile* flipper_file); - -/** - * Free FlipperFile. - * @param flipper_file Pointer to a FlipperFile instance - * @param strict_mode True obligates not to skip valid fields. False by default. - */ -void flipper_file_set_strict_mode(FlipperFile* flipper_file, bool strict_mode); - -/** - * Open existing file. - * @param flipper_file Pointer to a FlipperFile instance - * @param filename File name and path - * @return True on success - */ -bool flipper_file_open_existing(FlipperFile* flipper_file, const char* filename); - -/** - * Open existing file for writing and add values to the end of file. - * @param flipper_file Pointer to a FlipperFile instance - * @param filename File name and path - * @return True on success - */ -bool flipper_file_open_append(FlipperFile* flipper_file, const char* filename); - -/** - * Open file. Creates a new file, or deletes the contents of the file if it already exists. - * @param flipper_file Pointer to a FlipperFile instance - * @param filename File name and path - * @return True on success - */ -bool flipper_file_open_always(FlipperFile* flipper_file, const char* filename); - -/** - * Open file. Creates a new file, fails if file already exists. - * @param flipper_file Pointer to a FlipperFile instance - * @param filename File name and path - * @return True on success - */ -bool flipper_file_open_new(FlipperFile* flipper_file, const char* filename); - -/** - * Close the file. - * @param flipper_file Pointer to a FlipperFile instance - * @return True on success - */ -bool flipper_file_close(FlipperFile* flipper_file); - -/** - * Rewind the file RW pointer. - * @param flipper_file Pointer to a FlipperFile instance - * @return True on success - */ -bool flipper_file_rewind(FlipperFile* flipper_file); - -/** - * Read the header (file type and version) from the file. - * @param flipper_file Pointer to a FlipperFile instance - * @param filetype File type string - * @param version Version Value - * @return True on success - */ -bool flipper_file_read_header(FlipperFile* flipper_file, string_t filetype, uint32_t* version); - -/** - * Write the header (file type and version) to the file. - * @param flipper_file Pointer to a FlipperFile instance - * @param filetype File type string - * @param version Version Value - * @return True on success - */ -bool flipper_file_write_header( - FlipperFile* flipper_file, - string_t filetype, - const uint32_t version); - -/** - * Write the header (file type and version) to the file. Plain C string version. - * @param flipper_file Pointer to a FlipperFile instance - * @param filetype File type string - * @param version Version Value - * @return True on success - */ -bool flipper_file_write_header_cstr( - FlipperFile* flipper_file, - const char* filetype, - const uint32_t version); - -/** - * Get the count of values by key - * @param flipper_file - * @param key - * @param count - * @return bool - */ -bool flipper_file_get_value_count(FlipperFile* flipper_file, const char* key, uint32_t* count); - -/** - * Read a string from a file by Key - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @return True on success - */ -bool flipper_file_read_string(FlipperFile* flipper_file, const char* key, string_t data); - -/** - * Write key and string to file. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @return True on success - */ -bool flipper_file_write_string(FlipperFile* flipper_file, const char* key, string_t data); - -/** - * Write key and string to file. Plain C string version. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @return True on success - */ -bool flipper_file_write_string_cstr(FlipperFile* flipper_file, const char* key, const char* data); - -/** - * Read array of uint32 from a file by Key - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_read_uint32( - FlipperFile* flipper_file, - const char* key, - uint32_t* data, - const uint16_t data_size); - -/** - * Write key and array of uint32 to file. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_write_uint32( - FlipperFile* flipper_file, - const char* key, - const uint32_t* data, - const uint16_t data_size); - -/** - * Read array of int32 from a file by Key - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_read_int32( - FlipperFile* flipper_file, - const char* key, - int32_t* data, - const uint16_t data_size); - -/** - * Write key and array of int32 to file. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_write_int32( - FlipperFile* flipper_file, - const char* key, - const int32_t* data, - const uint16_t data_size); - -/** - * Read array of float from a file by Key - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_read_float( - FlipperFile* flipper_file, - const char* key, - float* data, - const uint16_t data_size); - -/** - * Write key and array of float to file. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_write_float( - FlipperFile* flipper_file, - const char* key, - const float* data, - const uint16_t data_size); - -/** - * Read hex array from a file by Key - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Value size - * @return True on success - */ -bool flipper_file_read_hex( - FlipperFile* flipper_file, - const char* key, - uint8_t* data, - const uint16_t data_size); - -/** - * Write key and hex array to file. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_write_hex( - FlipperFile* flipper_file, - const char* key, - const uint8_t* data, - const uint16_t data_size); - -/** - * Write comment to file. - * @param flipper_file Pointer to a FlipperFile instance - * @param data Comment text - * @return True on success - */ -bool flipper_file_write_comment(FlipperFile* flipper_file, string_t data); - -/** - * Write comment to file. Plain C string version. - * @param flipper_file Pointer to a FlipperFile instance - * @param data Comment text - * @return True on success - */ -bool flipper_file_write_comment_cstr(FlipperFile* flipper_file, const char* data); - -/** - * Removes the first matching key and its value from the file. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @return True on success - */ -bool flipper_file_delete_key(FlipperFile* flipper_file, const char* key); - -/** - * Updates the value of the first matching key to a string value. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @return True on success - */ -bool flipper_file_update_string(FlipperFile* flipper_file, const char* key, string_t data); - -/** - * Updates the value of the first matching key to a string value. Plain C version. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @return True on success - */ -bool flipper_file_update_string_cstr(FlipperFile* flipper_file, const char* key, const char* data); - -/** - * Updates the value of the first matching key to a uint32 array value. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_update_uint32( - FlipperFile* flipper_file, - const char* key, - const uint32_t* data, - const uint16_t data_size); - -/** - * Updates the value of the first matching key to a int32 array value. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_update_int32( - FlipperFile* flipper_file, - const char* key, - const int32_t* data, - const uint16_t data_size); - -/** - * Updates the value of the first matching key to a float array value. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_update_float( - FlipperFile* flipper_file, - const char* key, - const float* data, - const uint16_t data_size); - -/** - * Updates the value of the first matching key to a hex array value. Changes the RW pointer to an undefined position. - * @param flipper_file Pointer to a FlipperFile instance - * @param key Key - * @param data Value - * @param data_size Values count - * @return True on success - */ -bool flipper_file_update_hex( - FlipperFile* flipper_file, - const char* key, - const uint8_t* data, - const uint16_t data_size); - -/** Get file descriptor. - * - * We higly don't recommend to use it. - * This instance is owned by FlipperFile. - * @param flipper_file - * @return File* - */ -File* flipper_file_get_file(FlipperFile* flipper_file); - -#ifdef __cplusplus -} -#endif |