diff options
| author | David Crocker <dcrocker@eschertech.com> | 2017-11-18 12:36:06 +0300 |
|---|---|---|
| committer | David Crocker <dcrocker@eschertech.com> | 2017-11-18 12:36:26 +0300 |
| commit | e6b7c01e1f0afaac7a6478a6f3634b619f3bc734 (patch) | |
| tree | a7d0cf6a2444776910aca66da0c8e212e6e32cfc /.cproject | |
| parent | 377154d0eafd289ca2b4548002250c3be0341ab4 (diff) | |
Version 1.20beta8
New features:
T R1 activates the tool that was active at the last pause
M915 R2 and R3 actions are now implemented
Extruder heater PWM values are now compensated for supply voltage
Duet WiFi only: M587 and M589 without parameters now report the IP
addresses etc. as well as the SSID (needs DuetWiFiServer 1.20beta9)
When sensorless homing is used on a CoreXY printer, both X and Y motors
are monitored for stalling when homing X or Y. Similarly for CoreXYU
(both X and Y or U and V are monitored).
When using a segmented kinematics such as SCARA, or when long moves are
segmented due to mesh bed compensation, segmented moves can be paused
between segments
M562 with no parameters now clears all heater faults
New debugging module 14 added to report debugging message from the WiFi
module to USB. Use M111 S1 P14 to activate it.
Under voltage and over voltage events are now logged
Overheating drivers are now logged
M81 power off commands are now logged
Bug fixes:
Workaround for SX1509B chip problem: if an analog write was performed to
a pin on an SX1509B device, subsequent digital writes and pinMode calls
didn't work
When a print was resumed after power failure, the amount of extrusion
during the initial partial move was incorrect
Diffstat (limited to '.cproject')
| -rw-r--r-- | .cproject | 45 |
1 files changed, 30 insertions, 15 deletions
@@ -4,7 +4,10 @@ <cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850" moduleId="org.eclipse.cdt.core.settings" name="Duet085"> <macros> + <stringMacro name="LinkFlags2" type="VALUE_TEXT" value="-Wl,--end-group -lm -gcc"/> + <stringMacro name="LinkFlags1" type="VALUE_TEXT" value="-mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--start-group"/> <stringMacro name="CoreName" type="VALUE_TEXT" value="CoreNG"/> + <stringMacro name="GccPath" type="VALUE_TEXT" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update\bin"/> </macros> <externalSettings/> <extensions> @@ -20,8 +23,8 @@ <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850" name="Duet085" parent="cdt.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary file" postbuildStep="arm-none-eabi-objcopy -O binary ${workspace_loc:/${ProjName}/${ConfigName}}/${ProjName}.elf ${workspace_loc:/${ProjName}/${ConfigName}}/${ProjName}.bin"> <folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850." name="/" resourcePath=""> <toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.947353540" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release"> - <option id="cdt.managedbuild.option.gnu.cross.path.1742191832" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update" valueType="string"/> - <option id="cdt.managedbuild.option.gnu.cross.prefix.1660769040" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix" value="arm-none-eabi-" valueType="string"/> + <option id="cdt.managedbuild.option.gnu.cross.path.1742191832" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="${GccPath}" valueType="string"/> + <option id="cdt.managedbuild.option.gnu.cross.prefix.1660769040" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix" useByScannerDiscovery="false" value="arm-none-eabi-" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.223860525" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/RepRapFirmware}/Release" id="cdt.managedbuild.builder.gnu.cross.13059261" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/> <tool id="cdt.managedbuild.tool.gnu.cross.assembler.163742171" name="Cross GCC Assembler" superClass="cdt.managedbuild.tool.gnu.cross.assembler"> @@ -56,15 +59,15 @@ </tool> <tool id="cdt.managedbuild.tool.gnu.cross.c.linker.831729502" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker"/> <tool id="cdt.managedbuild.tool.gnu.cross.archiver.586905748" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/> - <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LINK_FLAGS_1} "${workspace_loc:/${CoreName}/SAM3X8E/cores/arduino/syscalls.o}" ${INPUTS} ${LINK_FLAGS_2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.77650722" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> - <option id="gnu.cpp.link.option.nostdlibs.296038599" name="No startup or default libs (-nostdlib)" superClass="gnu.cpp.link.option.nostdlibs" value="false" valueType="boolean"/> - <option id="gnu.cpp.link.option.paths.75045718" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" valueType="libPaths"> + <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LinkFlags1} "${workspace_loc:/${CoreName}/SAM3X8E/cores/arduino/syscalls.o}" ${INPUTS} ${LinkFlags2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.77650722" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> + <option id="gnu.cpp.link.option.nostdlibs.296038599" name="No startup or default libs (-nostdlib)" superClass="gnu.cpp.link.option.nostdlibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> + <option id="gnu.cpp.link.option.paths.75045718" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" useByScannerDiscovery="false" valueType="libPaths"> <listOptionValue builtIn="false" value=""${workspace_loc:/${CoreName}/SAM3X8E/}""/> </option> - <option id="gnu.cpp.link.option.libs.1995000942" name="Libraries (-l)" superClass="gnu.cpp.link.option.libs" valueType="libs"> + <option id="gnu.cpp.link.option.libs.1995000942" name="Libraries (-l)" superClass="gnu.cpp.link.option.libs" useByScannerDiscovery="false" valueType="libs"> <listOptionValue builtIn="false" value="${CoreName}"/> </option> - <option id="gnu.cpp.link.option.flags.1670739910" name="Linker flags" superClass="gnu.cpp.link.option.flags" value="-Os -Wl,--gc-sections -Wl,--fatal-warnings -mcpu=cortex-m3 -T${workspace_loc:/${CoreName}/variants/duet/linker_scripts/gcc/flash.ld} -Wl,-Map,${workspace_loc:/${ProjName}/${ConfigName}}/${BuildArtifactFileBaseName}.map" valueType="string"/> + <option id="gnu.cpp.link.option.flags.1670739910" name="Linker flags" superClass="gnu.cpp.link.option.flags" useByScannerDiscovery="false" value="-Os -Wl,--gc-sections -Wl,--fatal-warnings -mcpu=cortex-m3 -T${workspace_loc:/${CoreName}/variants/duet/linker_scripts/gcc/flash.ld} -Wl,-Map,${workspace_loc:/${ProjName}/${ConfigName}}/${BuildArtifactFileBaseName}.map" valueType="string"/> <inputType id="cdt.managedbuild.tool.gnu.cpp.linker.input.1491196930" superClass="cdt.managedbuild.tool.gnu.cpp.linker.input"> <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> <additionalInput kind="additionalinput" paths="$(LIBS)"/> @@ -116,7 +119,10 @@ <cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451" moduleId="org.eclipse.cdt.core.settings" name="DuetWiFi"> <macros> + <stringMacro name="LinkFlags2" type="VALUE_TEXT" value="-Wl,--end-group -lm -gcc"/> + <stringMacro name="LinkFlags1" type="VALUE_TEXT" value="-mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--start-group"/> <stringMacro name="CoreName" type="VALUE_TEXT" value="CoreNG"/> + <stringMacro name="GccPath" type="VALUE_TEXT" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update\bin"/> </macros> <externalSettings/> <extensions> @@ -132,7 +138,7 @@ <configuration artifactExtension="elf" artifactName="DuetWiFiFirmware" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451" name="DuetWiFi" parent="cdt.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary file" postbuildStep="arm-none-eabi-objcopy -O binary ${workspace_loc:/${ProjName}/${ConfigName}}/DuetWiFiFirmware.elf ${workspace_loc:/${ProjName}/${ConfigName}}/DuetWiFiFirmware.bin"> <folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451." name="/" resourcePath=""> <toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.1362047835" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release"> - <option id="cdt.managedbuild.option.gnu.cross.path.1491883811" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update" valueType="string"/> + <option id="cdt.managedbuild.option.gnu.cross.path.1491883811" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="${GccPath}" valueType="string"/> <option id="cdt.managedbuild.option.gnu.cross.prefix.353555591" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix" useByScannerDiscovery="false" value="arm-none-eabi-" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.857793524" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/RepRapFirmware}/Release" id="cdt.managedbuild.builder.gnu.cross.1026937542" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/> @@ -167,7 +173,7 @@ </tool> <tool id="cdt.managedbuild.tool.gnu.cross.c.linker.1561858475" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker"/> <tool id="cdt.managedbuild.tool.gnu.cross.archiver.367299064" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/> - <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LINK_FLAGS_1} "${workspace_loc:/${CoreName}/SAM4E8E/cores/arduino/syscalls.o}" ${INPUTS} ${LINK_FLAGS_2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.2096521800" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> + <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LinkFlags1} "${workspace_loc:/${CoreName}/SAM4E8E/cores/arduino/syscalls.o}" ${INPUTS} ${LinkFlags2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.2096521800" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> <option id="gnu.cpp.link.option.nostdlibs.111689408" name="No startup or default libs (-nostdlib)" superClass="gnu.cpp.link.option.nostdlibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <option id="gnu.cpp.link.option.paths.314107745" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" useByScannerDiscovery="false" valueType="libPaths"> <listOptionValue builtIn="false" value=""${workspace_loc:/${CoreName}/SAM4E8E/}""/> @@ -230,7 +236,10 @@ <cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1027429289"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1027429289" moduleId="org.eclipse.cdt.core.settings" name="RADDS"> <macros> + <stringMacro name="LinkFlags2" type="VALUE_TEXT" value="-Wl,--end-group -lm -gcc"/> + <stringMacro name="LinkFlags1" type="VALUE_TEXT" value="-mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--start-group"/> <stringMacro name="CoreName" type="VALUE_TEXT" value="CoreNG"/> + <stringMacro name="GccPath" type="VALUE_TEXT" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update\bin"/> </macros> <externalSettings/> <extensions> @@ -246,7 +255,7 @@ <configuration artifactExtension="elf" artifactName="${ProjName}-RADDS" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1027429289" name="RADDS" parent="cdt.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary file" postbuildStep="arm-none-eabi-objcopy -O binary ${workspace_loc:/${ProjName}/${ConfigName}}/${ProjName}-RADDS.elf ${workspace_loc:/${ProjName}/${ConfigName}}/${ProjName}-RADDS.bin"> <folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1027429289." name="/" resourcePath=""> <toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.1973208555" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release"> - <option id="cdt.managedbuild.option.gnu.cross.path.2092504710" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update" valueType="string"/> + <option id="cdt.managedbuild.option.gnu.cross.path.2092504710" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="${GccPath}" valueType="string"/> <option id="cdt.managedbuild.option.gnu.cross.prefix.1606498191" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix" useByScannerDiscovery="false" value="arm-none-eabi-" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.342355349" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/RepRapFirmware}/Release" id="cdt.managedbuild.builder.gnu.cross.1336978387" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/> @@ -279,7 +288,7 @@ </tool> <tool id="cdt.managedbuild.tool.gnu.cross.c.linker.1692168928" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker"/> <tool id="cdt.managedbuild.tool.gnu.cross.archiver.1755453550" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/> - <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LINK_FLAGS_1} "${workspace_loc:/${CoreName}/RADDS/cores/arduino/syscalls.o}" ${INPUTS} ${LINK_FLAGS_2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1176271302" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> + <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LinkFlags1} "${workspace_loc:/${CoreName}/RADDS/cores/arduino/syscalls.o}" ${INPUTS} ${LinkFlags2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1176271302" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> <option id="gnu.cpp.link.option.nostdlibs.706270025" name="No startup or default libs (-nostdlib)" superClass="gnu.cpp.link.option.nostdlibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <option id="gnu.cpp.link.option.paths.1160723414" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" useByScannerDiscovery="false" valueType="libPaths"> <listOptionValue builtIn="false" value=""${workspace_loc:/${CoreName}/RADDS/}""/> @@ -337,7 +346,10 @@ <cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451.1275216290"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451.1275216290" moduleId="org.eclipse.cdt.core.settings" name="DuetEthernet"> <macros> + <stringMacro name="LinkFlags2" type="VALUE_TEXT" value="-Wl,--end-group -lm -gcc"/> + <stringMacro name="LinkFlags1" type="VALUE_TEXT" value="-mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--start-group"/> <stringMacro name="CoreName" type="VALUE_TEXT" value="CoreNG"/> + <stringMacro name="GccPath" type="VALUE_TEXT" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update\bin"/> </macros> <externalSettings/> <extensions> @@ -353,7 +365,7 @@ <configuration artifactExtension="elf" artifactName="DuetEthernetFirmware" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451.1275216290" name="DuetEthernet" parent="cdt.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary file" postbuildStep="arm-none-eabi-objcopy -O binary ${workspace_loc:/${ProjName}/${ConfigName}}/DuetEthernetFirmware.elf ${workspace_loc:/${ProjName}/${ConfigName}}/DuetEthernetFirmware.bin"> <folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.241502451.1275216290." name="/" resourcePath=""> <toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.311889538" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release"> - <option id="cdt.managedbuild.option.gnu.cross.path.1965306885" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update" valueType="string"/> + <option id="cdt.managedbuild.option.gnu.cross.path.1965306885" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="${GccPath}" valueType="string"/> <option id="cdt.managedbuild.option.gnu.cross.prefix.444696517" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix" useByScannerDiscovery="false" value="arm-none-eabi-" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.252007317" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/RepRapFirmware}/Release" id="cdt.managedbuild.builder.gnu.cross.310136248" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/> @@ -392,7 +404,7 @@ </tool> <tool id="cdt.managedbuild.tool.gnu.cross.c.linker.212863977" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker"/> <tool id="cdt.managedbuild.tool.gnu.cross.archiver.136873036" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/> - <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LINK_FLAGS_1} "${workspace_loc:/${CoreName}/SAM4E8E/cores/arduino/syscalls.o}" ${INPUTS} ${LINK_FLAGS_2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.394147701" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> + <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LinkFlags1} "${workspace_loc:/${CoreName}/SAM4E8E/cores/arduino/syscalls.o}" ${INPUTS} ${LinkFlags2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.394147701" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> <option id="gnu.cpp.link.option.nostdlibs.278980629" name="No startup or default libs (-nostdlib)" superClass="gnu.cpp.link.option.nostdlibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <option id="gnu.cpp.link.option.paths.1667456082" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" useByScannerDiscovery="false" valueType="libPaths"> <listOptionValue builtIn="false" value=""${workspace_loc:/${CoreName}/SAM4E8E/}""/> @@ -474,7 +486,10 @@ <cconfiguration id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1745168887"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1745168887" moduleId="org.eclipse.cdt.core.settings" name="Alligator"> <macros> + <stringMacro name="LinkFlags2" type="VALUE_TEXT" value="-Wl,--end-group -lm -gcc"/> + <stringMacro name="LinkFlags1" type="VALUE_TEXT" value="-mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--start-group"/> <stringMacro name="CoreName" type="VALUE_TEXT" value="CoreNG"/> + <stringMacro name="GccPath" type="VALUE_TEXT" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update\bin"/> </macros> <externalSettings/> <extensions> @@ -490,7 +505,7 @@ <configuration artifactExtension="elf" artifactName="${ProjName}-Alligator" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1745168887" name="Alligator" parent="cdt.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary file" postbuildStep="arm-none-eabi-objcopy -O binary ${workspace_loc:/${ProjName}/${ConfigName}}/${ProjName}-Alligator.elf ${workspace_loc:/${ProjName}/${ConfigName}}/${ProjName}-Alligator.bin"> <folderInfo id="cdt.managedbuild.config.gnu.cross.exe.release.516195201.976458850.1745168887." name="/" resourcePath=""> <toolChain id="cdt.managedbuild.toolchain.gnu.cross.exe.release.623324432" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.exe.release"> - <option id="cdt.managedbuild.option.gnu.cross.path.645044151" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="C:\Program Files (x86)\GNU Tools ARM Embedded\6 2017-q2-update" valueType="string"/> + <option id="cdt.managedbuild.option.gnu.cross.path.645044151" name="Path" superClass="cdt.managedbuild.option.gnu.cross.path" useByScannerDiscovery="false" value="${GccPath}" valueType="string"/> <option id="cdt.managedbuild.option.gnu.cross.prefix.629438941" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix" useByScannerDiscovery="false" value="arm-none-eabi-" valueType="string"/> <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="cdt.managedbuild.targetPlatform.gnu.cross.878309876" isAbstract="false" osList="all" superClass="cdt.managedbuild.targetPlatform.gnu.cross"/> <builder buildPath="${workspace_loc:/RepRapFirmware}/Release" id="cdt.managedbuild.builder.gnu.cross.56178753" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="cdt.managedbuild.builder.gnu.cross"/> @@ -528,7 +543,7 @@ </tool> <tool id="cdt.managedbuild.tool.gnu.cross.c.linker.1510685625" name="Cross GCC Linker" superClass="cdt.managedbuild.tool.gnu.cross.c.linker"/> <tool id="cdt.managedbuild.tool.gnu.cross.archiver.2031955379" name="Cross GCC Archiver" superClass="cdt.managedbuild.tool.gnu.cross.archiver"/> - <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LINK_FLAGS_1} "${workspace_loc:/${CoreName}/Alligator/cores/arduino/syscalls.o}" ${INPUTS} ${LINK_FLAGS_2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1616069436" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> + <tool command="gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${LinkFlags1} "${workspace_loc:/${CoreName}/Alligator/cores/arduino/syscalls.o}" ${INPUTS} ${LinkFlags2}" id="cdt.managedbuild.tool.gnu.cross.cpp.linker.1616069436" name="Cross G++ Linker" superClass="cdt.managedbuild.tool.gnu.cross.cpp.linker"> <option id="gnu.cpp.link.option.nostdlibs.760089516" name="No startup or default libs (-nostdlib)" superClass="gnu.cpp.link.option.nostdlibs" useByScannerDiscovery="false" value="false" valueType="boolean"/> <option id="gnu.cpp.link.option.paths.1593340130" name="Library search path (-L)" superClass="gnu.cpp.link.option.paths" useByScannerDiscovery="false" valueType="libPaths"> <listOptionValue builtIn="false" value=""${workspace_loc:/${CoreName}/Alligator/}""/> |