diff options
author | dc42 <dcrocker@eschertech.com> | 2018-06-23 14:17:40 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2018-06-23 14:17:40 +0300 |
commit | 6b835cb3c8e9aa10113ae750151d9f9065116cd4 (patch) | |
tree | 9bdb0367f4c09c76503c261c76ce43962f11167f | |
parent | 097b204eccadeb1ed9bffaa56a9dafa2ca3db0ca (diff) |
Update WHATS_NEW.md
-rw-r--r-- | WHATS_NEW.md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/WHATS_NEW.md b/WHATS_NEW.md index 3e980ae7..3265c199 100644 --- a/WHATS_NEW.md +++ b/WHATS_NEW.md @@ -16,7 +16,7 @@ Bug fixes: - M206 with no parameters didn't report the current axis offsets - During heating, the firmware returned M408 S0 responses to the PanelDue port even if the last request was M408 S2 - Fixed VBUS detection (thanks chrishamm) -- If the resume threshold in the M911 command was set higher than the supply voltage then the save-on-power-off mechanism never got primed. It will now prime at thwe auto-save threshold plus 0.5V or the resume threshold, whichever is lower. +- If the resume threshold in the M911 command was set higher than the supply voltage then the save-on-power-off mechanism never got primed. It will now prime at the auto-save threshold plus 0.5V or the resume threshold, whichever is lower. - Fixed "2dtstc2diva=u" in debug printout - Where a G- or M-code command parameter was supposed to accept unsigned values only, if a negative value was supplied then it was accepted and converted to a large unsigned value |