Version 1.19beta7

New features:
- M291 command is provided to display a message box with options for
timeout, acknowledgement and Z jog buttons
- M292 command is provided to acknowledge M291 messages
- Manual delta calibration and bed compensation is supported (use P0 in
the M558 command to indicate that there is no Z probe)
- Minimum value for S parameter (maximum heater PWM) in M307 command is
reduced from 20% to 1%
- Core XYU kinematics are now supported (thanks Lars)
- RADDS build now supports 9 motors (thanks Tom)
- If a homing move uses parameter S3 instead of S1 then the axis minimum
or maximum value is set to the current position instead of vice versa
- M589 with no parameters now reports the Duet's own SSID
- M589 S"*" now deletes the Duet WiFi's own access point details

Bug fixes:
- Tool X offsets are now applied on the next move even if it has no Z
parameter
- The tool change restore point coordinates now take account of X axis
mapping
- M588 P"*" command (forget all access points) now works
- On the Duet WiFi, after using M589 to set up access point parameters,
when M552 S2 was sent to start the WiFi module in AP mode it reported
"WiFi reported error: invalid access point configuration". The fix also
needs DuetWiFiServer version 1.19beta7.
- On a delta printer the effector height is limited to reachable values

Areas of code refactored (so watch out for new bugs):
- G30 bed probing
- Baby stepping
- Tool offset implementation

Upgrade notes:
- SSIDs and passwords in M587, M588 and M589 commands must now be
enclosed in double quotes
- Height map filenames in G29, M374 and M375 commands must now be
enclosed in double quotes
- On a Duet WiFi you should also upgrade DuetWiFiServer.bin to version
1.19beta7. You do not need to perform a simultaneous upgrade, but M587
and M589 reporting functionality won't work correctly if your
DuetWiFiFirmware and DuetWiFiServer versions are out of step.

1 files changed, 27 insertions, 0 deletions

diff --git a/src/GCodes/RestorePoint.cpp b/src/GCodes/RestorePoint.cpp
new file mode 100644
index 00000000..04a71fc6
--- /dev/null
+++ b/src/GCodes/RestorePoint.cpp
@@ -0,0 +1,27 @@
+/*
+ * RestorePoint.cpp
+ *
+ *  Created on: 14 Jun 2017
+ *      Author: David
+ */
+
+#include "RestorePoint.h"
+
+RestorePoint::RestorePoint()
+{
+	Init();
+}
+
+void RestorePoint::Init()
+{
+	for (size_t i = 0; i < DRIVES; ++i)
+	{
+		moveCoords[i] = 0.0;
+	}
+	feedRate = DefaultFeedrate * SecondsToMinutes;
+#if SUPPORT_IOBITS
+	ioBits = 0;
+#endif
+}
+
+// End