diff options
author | David Crocker <dcrocker@eschertech.com> | 2017-06-11 00:19:50 +0300 |
---|---|---|
committer | David Crocker <dcrocker@eschertech.com> | 2017-06-11 00:23:47 +0300 |
commit | 310b7c0e1ae92d65421276c3779efeddfb6977ff (patch) | |
tree | 56afba8162017646c4f1a47b8da0512482c7f336 /src/Heating/Sensors/RtdSensor31865.cpp | |
parent | d026b0e4d2a7d5fda771e843cfca12e0370440d7 (diff) |
Version 1.19beta6
Refactored temperatyure sensor code
Refactored fan control code
Support invisible axes (M584 P parameter)
Supprt user-defined virtual heaters
Support heater names
Support proportional thermostatic fan control
Fix G10 retraction command
Removed delta probe code
Diffstat (limited to 'src/Heating/Sensors/RtdSensor31865.cpp')
-rw-r--r-- | src/Heating/Sensors/RtdSensor31865.cpp | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/src/Heating/Sensors/RtdSensor31865.cpp b/src/Heating/Sensors/RtdSensor31865.cpp new file mode 100644 index 00000000..35c4d2f7 --- /dev/null +++ b/src/Heating/Sensors/RtdSensor31865.cpp @@ -0,0 +1,207 @@ +/* + * RtdSensor31865.cpp + * + * Created on: 8 Jun 2017 + * Author: David + */ + +#include "RtdSensor31865.h" +#include "RepRap.h" +#include "Platform.h" +#include "Core.h" + +const uint32_t MAX31865_Frequency = 4000000; // maximum for MAX31865 is also 5MHz + +// SPI modes: +// If the inactive state of SCL is LOW (CPOL = 0) (in the case of the MAX31865, this is sampled on the falling edge of CS): +// The MAX31865 changes data after the rising edge of CLK, and samples input data on the falling edge. +// This requires NCPHA = 0. +const uint8_t MAX31865_SpiMode = SPI_MODE_1; + +// Define the minimum interval between readings. The MAX31865 needs 62.5ms in 50Hz filter mode. +const uint32_t MinimumReadInterval = 100; // minimum interval between reads, in milliseconds + +// Table of temperature vs. MAX31865 result for PT100 thermistor, from the MAX31865 datasheet +struct TempTableEntry +{ + int16_t temperature; + uint16_t adcReading; +}; + +static const TempTableEntry tempTable[] = +{ + {-30, 7227}, + {-20, 7550}, + {-10, 7871}, + {0, 8192}, + {10, 8512}, + {20, 8830}, + {30, 9148}, + {40, 9465}, + {50, 9781}, + {60, 10096}, + {70, 10410}, + {80, 10723}, + {90, 11035}, + {100, 11346}, + {110, 11657}, + {120, 11966}, + {130, 12274}, + {140, 12582}, + {150, 12888}, + {160, 13194}, + {170, 13498}, + {180, 13802}, + {190, 14104}, + {200, 14406}, + {225, 15156}, + {250, 15901}, + {275, 16639}, + {300, 17371}, + {325, 18098}, + {350, 18818}, + {375, 19533}, + {400, 20242}, + {425, 20945}, + {450, 21642}, + {475, 22333}, + {500, 23018}, + {525, 23697}, + {550, 24370} +}; + +const size_t NumTempTableEntries = sizeof(tempTable)/sizeof(tempTable[0]); + +RtdSensor31865::RtdSensor31865(unsigned int channel) + : SpiTemperatureSensor(channel, "PT100 (MAX31865)", channel - FirstRtdChannel, MAX31865_SpiMode, MAX31865_Frequency) +{ +} + +// Perform the actual hardware initialization for attaching and using this device on the SPI hardware bus. +void RtdSensor31865::Init() +{ + InitSpi(); + + TemperatureError rslt; + for (unsigned int i = 0; i < 3; ++i) // try 3 times + { + rslt = TryInitRtd(); + if (rslt == TemperatureError::success) + { + break; + } + delay(MinimumReadInterval); + } + + lastReadingTime = millis(); + lastResult = rslt; + lastTemperature = 0.0; + + if (rslt != TemperatureError::success) + { + reprap.GetPlatform().MessageF(GENERIC_MESSAGE, "Error: failed to initialise RTD: %s\n", TemperatureErrorString(rslt)); + } +} + +// Try to initialise the RTD +TemperatureError RtdSensor31865::TryInitRtd() const +{ + // Note that to get the MAX31865 to do continuous conversions, we need to set the bias bit as well as the continuous-conversion bit + static const uint8_t modeData[2] = { 0x80, 0xC3 }; // write register 0, bias on, auto conversion, clear errors, 50Hz + uint32_t rawVal; + TemperatureError sts = DoSpiTransaction(modeData, 2, rawVal); + + if (sts == TemperatureError::success) + { + static const uint8_t readData[2] = { 0x00, 0x00 }; // read register 0 + sts = DoSpiTransaction(readData, 2, rawVal); + } + + //debugPrintf("Status %d data %04x\n", (int)sts, rawVal); + return (sts == TemperatureError::success && (uint8_t)rawVal != 0xC1) + ? TemperatureError::badResponse + : sts; +} + +TemperatureError RtdSensor31865::GetTemperature(float& t) +{ + if (inInterrupt() || millis() - lastReadingTime < MinimumReadInterval) + { + t = lastTemperature; + } + else + { + static const uint8_t dataOut[4] = {0, 55, 55, 55}; // read registers 0 (control), 1 (MSB) and 2 (LSB) + uint32_t rawVal; + TemperatureError sts = DoSpiTransaction(dataOut, 4, rawVal); + + if (sts != TemperatureError::success) + { + lastResult = sts; + } + else + { + lastReadingTime = millis(); + if (((rawVal & 0x00C10000) != 0xC10000) +#if 0 + // We no longer check the error status bit, because it seems to be impossible to clear it once it has been set. + // Perhaps we would need to exit continuous reading mode to do so, and then re-enable it afterwards. But this would + // take to long. +#else + || (rawVal & 1) != 0 +#endif + ) + { + // Either the continuous conversion bit has got cleared, or the fault bit has been set + TryInitRtd(); + lastResult = TemperatureError::hardwareError; + } + else + { + uint16_t adcVal = (rawVal >> 1) & 0x7FFF; + + // Formally-verified binary search routine, adapted from one of the eCv examples + size_t low = 0u, high = NumTempTableEntries; + while (high > low) + keep(low <= high; high <= NumTempTableEntries) + keep(low == 0u || tempTable[low - 1u].adcReading < adcVal) + keep(high == NumTempTableEntries || adcVal <= tempTable[high].adcReading) + decrease(high - low) + { + size_t mid = (high - low)/2u + low; // get the mid point, avoiding arithmetic overflow + if (adcVal <= tempTable[mid].adcReading) + { + high = mid; + } + else + { + low = mid + 1u; + } + } + assert(low <= NumTempTableEntries); + assert(low == 0 || tempTable[low - 1] < adcVal); + assert(low == NumTempTableEntries || adcVal <= tempTable[low]); + + if (low == 0) // if off the bottom of the table + { + lastResult = TemperatureError::shortCircuit; + } + else if (low >= NumTempTableEntries) // if off the top of the table + { + lastResult = TemperatureError::openCircuit; + } + else + { + const float interpolationFraction = (float)(adcVal - tempTable[low - 1].adcReading)/(float)(tempTable[low].adcReading - tempTable[low - 1].adcReading); + t = lastTemperature = ((float)(tempTable[low].temperature - tempTable[low - 1].temperature) * interpolationFraction) + + (float)tempTable[low - 1].temperature; + //debugPrintf("raw %u low %u interp %f temp %f\n", adcVal, low, interpolationFraction, *t); + lastResult = TemperatureError::success; + } + } + } + } + return lastResult; +} + +// End |