| Age | Commit message (Collapse) | Author |
|---|
|
* commit '26ac22e5e7394346e9d59f800e7d4e91f4518d33':
movenc: Add a new flag for writing global sidx indexes for dash
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
|
|
The double meaning of the faststart flag (moving a moov atom
to the start of files, making them streamable, for non-fragmented
files, vs inserting a global sidx index at the start of files
for fragmented files) is confusing - see 40ed1cbf1 for
explanation of its origins.
Since the second meaning of the flag hasn't been part of any
libav release yet, just rename it to get rid of the confusion
without any extra deprecation (which wouldn't get rid of the
potential confusion, of users adding -movflags faststart
even for fragmented files, where it isn't needed for making
them "streamable").
This gets back the old behaviour, where -movflags faststart
doesn't have any effect for fragmented files.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '83f254e65f938657a4dbec711e4c94252a72daf9':
movenc: Rename reserved_moov_pos to reserved_header_pos
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
|
|
The same field is also used for writing the sidx index header,
for fragmented files, when the faststart flag is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
|
|
* commit '67a2912307c3c08f2725ccae162cfe3426b80184':
movenc: Don't assume that fragment durations in pts is equal to duration in dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit '2889c5e16711770437f380f1bead5f72c6a0b17a':
movenc: Heuristically set the duration of the last sample in a fragment if not set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
For strict CFR, they should be pretty much equal, but if the stream
is VFR, there can be a sometimes significant difference.
Calculate the pts duration separately, used in sidx atoms and for
tfrf/tfxd boxes in smooth streaming ismv files.
Also make sure to reduce the duration of sidx entries according to
edit lists.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
not set
Even if this is a guess, it is way better than writing a zero duration
of the last sample in a fragment (because if the duration is zero,
the first sample of the next fragment will have the same timestamp
as the last sample in the previous one).
Since we normally don't require libavformat muxer users to set
the duration field in AVPacket, we probably can't strictly require
it here either, so don't log this as a strict warning, only as info.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '2cb9c2fc59c9267ad2631c07c81c188058502259':
movenc: Allow interleaving samples when writing fragmented files
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
This is incompatible with the omit_tfhd_offset flag (writing
position independent fragments with interleaving requires the
default_base_moof flag).
This makes the moof atoms slightly bigger, but can be better for
playback (improving locality of sample data in the mdat).
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '448c8cfe4c53e9e806effd8505b46d57fa707061':
movenc: Support setting fragment_index before the moov atom is written
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit '0c5e380c2c266d2e8a13c000cc527529db837f10':
movenc: Don't rely on the fragment index for vc1 info gathering
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
This way, the caller doesn't need to coordinate setting the option
after the moov atom has been written. The downside is that it is
no longer possible to use the option for checking whether the moov
atom already has been written, but a caller is able to keep track
of that by other means anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
The previous use of the mov->fragments field, for determining whether
written packets were part of the first fragment or not, didn't
work as intended when using the empty_moov flag.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
As this is depricated it should not be on by default, it is only
supported for MOV containers, depends on avpriv_get_gamma_from_trc()
Enable by:
-movflags +write_gama
This will use the color_trc to supply a gamma value, if desired an
explicit value may be supplied using the -mov_gamma option supplying
a suitable floating point value, values <=1e-6 will not be written.
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
|
|
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit 'b3b0b35db2f3b61bf2f0f4fa85f5b6267d83c8fe':
movenc: Get rid of a hack for updating the dvc1 atom
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit '847bf5988fec1d3e65c1d8cf0cdb8caf0cfd0c1b':
movenc: Add an option for delaying writing the moov with empty_moov
Conflicts:
libavformat/movenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
Use the more generic approach with the delay_moov flag, instead of
having a update mechanism specific to this one single atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
This delays writing the moov until the first fragment is written,
or can be flushed by the caller explicitly when wanted. If the first
sample in all streams is available at this point, we can write
a proper editlist at this point, allowing streams to start at
something else than dts=0. For AC3 and DNXHD, a packet is
needed in order to write the moov header properly.
This isn't added to the normal behaviour for empty_moov, since
the behaviour that ftyp+moov is written during avformat_write_header
would be changed. Callers that split the output stream into header+segments
(either by flushing manually, with the custom_frag flag set, or by
just differentiating between data written during avformat_write_header
and the rest) will need to be adjusted to take this option into use.
For handling streams that start at something else than dts=0, an
alternative would be to use different kinds of heuristics for
guessing the start dts (using AVCodecContext delay or has_b_frames
together with the frame rate), but this is not reliable and doesn't
necessarily work well with stream copy, and wouldn't work for getting
the right initialization data for AC3 or DNXHD either.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '59f0275dd0a42a7f90271a83a78e9ca5e69ff5b0':
movenc: Adjust the pts of new fragments similarly to what is done for dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
The pts and the corresponding duration is written in sidx
atoms, thus make sure these match up correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit 'ee37620b6ae4783cda637408422044b2d14a688c':
movenc: Add a flag for indicating a discontinuous fragment
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
This allows creating a later mp4 fragment without sequentially
writing the earlier ones before (when called from a segmenter).
Normally when writing a fragmented mp4 file sequentially, the
first timestamps of a fragment are adjusted to match the
end of the previous fragment, to make sure the timestamp is the
same, even if it is calculated as the sum of previous fragment
durations. (And for the first packet in a file, the offset of
the first packet is written using an edit list.)
When writing an individual mp4 fragment discontinuously like this
(with potentially writing the earlier fragments separately later),
there's a risk of getting a gap in the timeline if the duration
field of the last packet in the previous fragment doesn't match up
with the start time of the next fragment.
Using this requires setting -avoid_negative_ts make_non_negative
(or -avoid_negative_ts 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '40ed1cbf147d09fc0894bee160f0b6b6d9159fc5':
movenc: Allow writing a DASH sidx atom at the start of files
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit '2ded57371abead879bcee56da5131e5fac0d17ef':
movenc: Add support for writing sidx atoms for DASH segments
Conflicts:
Changelog
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit '2d9d6afb8d2f284f5e620ecc19f643d5cd3facb8':
movenc: Factorize adding fragment info into a separate function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '1d8a0c1b43e58332a3a15c67d4adc161713cade8':
movenc: Allow to request not to use edit lists
Conflicts:
libavformat/movenc.c
See: 537ef8bebf8a35aab448db6ec876e275a10f0f15
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
In this case, shift tracks to start from zero instead (potentially
stretching the first sample in tracks that start later than the
first one).
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. This results in AV sync errors when
edit lists are used to adjust AV sync.
Some players, such as QuickTime, don't respect the duration for
audio packets, so if an audio track starts later than the video
track and the first audio sample gets a duration longer than the
actual amount of data in it, the result will be out of sync.
Based on patches by Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit '2f221b6a9365aa400061e16266f2d1242f7169f8':
movenc: Define the flag bits using shifts instead of as decimal numbers
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit '573b1de2d7f1db71030f91ecdded7d0bc071f6b6':
movenc: Don't use track_id to decide which track is the first in a moof
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
If one track doesn't have any samples within a moof, no traf/trun
is written for it. When the omit_tfhd_offset flag is set, none
of the tfhd atoms have any base_data_offset set, and the implicit
offset (end of previous track fragment data, or start of the moof
for the first trun) is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
|
|
Support only one independent substream right now, and only syncframes
containing 6 blocks.
Fixes part of ticket #3074
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit 'da9cc22d5bd5f59756c2037b02966376da2cf323':
movenc: add track title to tracks
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
|
|
* commit '0897d2fdc7755849c3ae58d8b543ef734c200d3c':
movenc: Add option to disable nero chapters
Conflicts:
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
And add flag to muxer documentation.
Nero chapters break some taggers (mp3tag and iTunes).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
|
|
center channel
Fixes Ticket3727
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
|
|
* commit 'f90729699db9ede2bef2b28000f1795dab1b8996':
mov: Do not group tracks if more than one is enabled per type
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
The specification requires at most 1 track enabled per alternate group.
|
|
* commit '0ba5299a805e9ccaef1a757381fc2ada4d54b8a1':
movenc: use the "encoder" metadata tag to write stsd Compressorname
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
|
This mirrors the demuxer behaviour and avoids accessing
AVCodecContext.codec, which should not be done in muxers.
|
|
* commit '1e9db41e2a2166be5671b088ef4ad06a40af459f':
movenc: Allow override of major brand in ftyp atom
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
|
