From 9aeeeb63f7e1ab7b0b7bb839a5f258667a2d2d78 Mon Sep 17 00:00:00 2001
From: Fabrice Bellard <fabrice@bellard.org>
Date: Wed, 20 Dec 2000 00:02:47 +0000
Subject: Initial revision

Originally committed as revision 2 to svn://svn.ffmpeg.org/ffmpeg/trunk
---
 doc/ffserver.conf | 214 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 214 insertions(+)
 create mode 100644 doc/ffserver.conf

(limited to 'doc/ffserver.conf')

diff --git a/doc/ffserver.conf b/doc/ffserver.conf
new file mode 100644
index 0000000000..8b5d926a12
--- /dev/null
+++ b/doc/ffserver.conf
@@ -0,0 +1,214 @@
+# Port on which the server is listening. You must select a different
+# port from your standard http web server if it is running on the same
+# computer.
+
+Port 8080
+
+# Address on which the server is bound. Only useful if you have
+# several network interfaces.
+
+BindAddress 0.0.0.0
+
+# Host and port of the master server if you which that this server
+# duplicates another existing server. Otherwise, the server does the
+# audio/video grab itself. See the following options for the grab parameters 
+
+#MasterServer http://localhost:80/index.html
+
+# Grab parameters
+
+#AudioDevice /dev/dsp
+#VideoDevice /dev/video
+
+# Number of simultaneous requests that can be handled. Since FFServer
+# is very fast, this limit is determined mainly by your Internet
+# connection speed.
+
+MaxClients 1000
+
+# Access Log file (uses standard Apache log file format)
+# '-' is the standard output
+
+CustomLog -
+
+##################################################################
+# Now you can define each stream which will be generated from the
+# original audio and video stream. Each format has a filename (here
+# 'test128.mpg'). FFServer will send this stream when answering a
+# request containing this filename.
+
+<Stream test1.mpg>
+
+# Format of the stream : you can choose among:
+# mpeg1      : MPEG1 multiplexed video and audio
+# mpeg1video : only MPEG1 video
+# mp2        : MPEG audio layer 2
+# mp3        : MPEG audio layer 3 (currently sent as layer 2)
+# rm         : Real Networks compatible stream. Multiplexed audio and video.
+# ra         : Real Networks compatible stream. Audio only.
+# mpjpeg     : Multipart JPEG (works with Netscape without any plugin)
+# jpeg       : Generate a single JPEG image.
+# asf        : ASF compatible stream (Windows Media Player format)
+# swf        : Macromedia flash(tm) compatible stream
+# master     : special ffmpeg stream used to duplicate a server
+
+Format mpeg1
+
+# Bitrate for the audio stream. Codecs usually support only a few different bitrates. 
+
+AudioBitRate 32
+
+# Number of audio channels : 1 = mono, 2 = stereo
+
+AudioChannels 1
+
+# Sampling frequency for audio. When using low bitrates, you should
+# lower this frequency to 22050 or 11025. The supported frequencies
+# depend on the selected audio codec.
+
+AudioSampleRate 44100
+
+# Bitrate for the video stream.
+VideoBitRate 64
+
+# Number of frames per second
+VideoFrameRate 3
+
+# Size of the video frame : WxH
+# W : width, H : height
+# The following abbreviation are defined : sqcif, qcif, cif, 4cif
+#VideoSize    352x240
+
+# transmit only intra frames (useful for low bitrates) 
+VideoIntraOnly
+
+# If non intra only, an intra frame is transmitted every VideoGopSize
+# frames Video synchronization can only begin at an I frames.
+#VideoGopSize 12
+
+</Stream>
+
+# second mpeg stream with high frame rate
+
+<Stream test2.mpg>
+Format mpeg1video
+VideoBitRate 128
+VideoFrameRate 25
+#VideoSize    352x240
+VideoGopSize 25
+</Stream>
+
+##################################################################
+# Another stream : used to download data to another server which
+# duplicates this one
+
+<Stream master>
+
+Format master
+
+</Stream>
+
+##################################################################
+# Another stream : Real with audio only at 32 kbits
+
+<Stream test.ra>
+
+Format ra
+AudioBitRate 32
+
+</Stream>
+
+##################################################################
+# Another stream : Real with audio and video at 64 kbits
+
+<Stream test.rm>
+
+Format rm
+
+AudioBitRate 32
+VideoBitRate 20
+VideoFrameRate 2
+VideoIntraOnly
+
+</Stream>
+
+##################################################################
+# Another stream : Mpeg audio layer 2 at 64 kbits.
+
+<Stream test.mp2>
+
+Format mp2
+AudioBitRate 64
+AudioSampleRate 44100
+
+</Stream>
+
+<Stream test1.mp2>
+
+Format mp2
+AudioBitRate 32
+AudioSampleRate 16000
+
+</Stream>
+
+##################################################################
+# Another stream : Multipart JPEG
+
+<Stream test.mjpg>
+
+Format mpjpeg
+
+VideoFrameRate 2
+VideoIntraOnly
+
+</Stream>
+
+##################################################################
+# Another stream : Multipart JPEG
+
+<Stream test.jpg>
+
+Format jpeg
+
+# the parameters are choose here to take the same output as the
+# Multipart JPEG one.
+VideoFrameRate 2 
+VideoIntraOnly
+
+</Stream>
+
+##################################################################
+# Another stream : Flash
+
+<Stream test.swf>
+
+Format swf
+
+VideoFrameRate 2
+VideoIntraOnly
+
+</Stream>
+
+
+##################################################################
+# Another stream : ASF compatible
+
+<Stream test.asf>
+
+Format asf
+
+AudioBitRate 64
+AudioSampleRate 44100
+VideoFrameRate 2
+VideoIntraOnly
+
+</Stream>
+
+##################################################################
+# Another stream : server status
+
+<Stream stat.html>
+
+Format status
+
+</Stream>
-- 
cgit v1.2.3