From 22339d873defdc317b988dc3a536143bd4443325 Mon Sep 17 00:00:00 2001
From: Martin Falatic <martin@falatic.com>
Date: Tue, 3 Sep 2019 00:51:03 -0700
Subject: Make examples consistent and document the likely non-RGB types

Resolves #878, #877, #928
---
 examples/Blink/Blink.ino               | 71 +++++++++++++++++++------------
 examples/FirstLight/FirstLight.ino     | 78 ++++++++++++++++++++--------------
 examples/RGBCalibrate/RGBCalibrate.ino | 63 ++++++++++++++++++---------
 3 files changed, 132 insertions(+), 80 deletions(-)

diff --git a/examples/Blink/Blink.ino b/examples/Blink/Blink.ino
index 33648694..443896ec 100644
--- a/examples/Blink/Blink.ino
+++ b/examples/Blink/Blink.ino
@@ -3,9 +3,10 @@
 // How many leds in your strip?
 #define NUM_LEDS 1
 
-// For led chips like Neopixels, which have a data line, ground, and power, you just
+// For led chips like WS2812, which have a data line, ground, and power, you just
 // need to define DATA_PIN.  For led chipsets that are SPI based (four wires - data, clock,
 // ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
+// Clock pin only needed for SPI based chipsets when not using hardware SPI
 #define DATA_PIN 3
 #define CLOCK_PIN 13
 
@@ -13,33 +14,47 @@
 CRGB leds[NUM_LEDS];
 
 void setup() { 
-      // Uncomment/edit one of the following lines for your leds arrangement.
-      // FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<TM1809, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<WS2812B, DATA_PIN, RGB>(leds, NUM_LEDS);
-  	  FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS);
-      // FastLED.addLeds<APA104, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<GW6205, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<GW6205_400, DATA_PIN, RGB>(leds, NUM_LEDS);
-      
-      // FastLED.addLeds<WS2801, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<SM16716, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<LPD8806, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<P9813, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<APA102, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<DOTSTAR, RGB>(leds, NUM_LEDS);
-
-      // FastLED.addLeds<WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // Uncomment/edit one of the following lines for your leds arrangement.
+    // ## Clockless types ##
+    FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS);  // GRB ordering is assumed
+    // FastLED.addLeds<SM16703, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1829, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1812, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1809, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1904, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS2903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2852, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2812B, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<GS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SK6812, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<APA106, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<PL9823, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2813, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<APA104, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2811_400, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GE8822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GW6205, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GW6205_400, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<LPD1886, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<LPD1886_8BIT, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // ## Clocked (SPI) types ##
+    // FastLED.addLeds<LPD6803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<SK9822, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
 }
 
 void loop() { 
diff --git a/examples/FirstLight/FirstLight.ino b/examples/FirstLight/FirstLight.ino
index 9f561b08..8eaf4e23 100644
--- a/examples/FirstLight/FirstLight.ino
+++ b/examples/FirstLight/FirstLight.ino
@@ -14,11 +14,12 @@
 // How many leds are in the strip?
 #define NUM_LEDS 60
 
-// Data pin that led data will be written out over
-#define DATA_PIN 3
-
+// For led chips like WS2812, which have a data line, ground, and power, you just
+// need to define DATA_PIN.  For led chipsets that are SPI based (four wires - data, clock,
+// ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
 // Clock pin only needed for SPI based chipsets when not using hardware SPI
-//#define CLOCK_PIN 8
+#define DATA_PIN 3
+#define CLOCK_PIN 13
 
 // This is an array of leds.  One item for each led in your strip.
 CRGB leds[NUM_LEDS];
@@ -28,34 +29,47 @@ void setup() {
 	// sanity check delay - allows reprogramming if accidently blowing power w/leds
    	delay(2000);
 
-      // Uncomment one of the following lines for your leds arrangement.
-      // FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<TM1809, DATA_PIN, RGB>(leds, NUM_LEDS);
-      FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<WS2812B, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS);
-      // FastLED.addLeds<APA104, DATA_PIN>(leds, NUM_LEDS);
-      // FastLED.addLeds<WS2811_400, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<GW6205, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<GW6205_400, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
-
-      // FastLED.addLeds<WS2801, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<SM16716, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<LPD8806, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<P9813, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<APA102, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<DOTSTAR, RGB>(leds, NUM_LEDS);
-      
-      // FastLED.addLeds<WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-      // FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // Uncomment/edit one of the following lines for your leds arrangement.
+    // ## Clockless types ##
+    // FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS);  // GRB ordering is assumed
+    // FastLED.addLeds<SM16703, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1829, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1812, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1809, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1904, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS2903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2852, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2812B, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<GS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SK6812, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<APA106, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<PL9823, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2813, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<APA104, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2811_400, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GE8822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GW6205, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GW6205_400, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<LPD1886, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<LPD1886_8BIT, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // ## Clocked (SPI) types ##
+    // FastLED.addLeds<LPD6803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<SK9822, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
 }
 
 // This function runs over and over, and is where you do the magic to light
diff --git a/examples/RGBCalibrate/RGBCalibrate.ino b/examples/RGBCalibrate/RGBCalibrate.ino
index 72e21507..5ff33805 100644
--- a/examples/RGBCalibrate/RGBCalibrate.ino
+++ b/examples/RGBCalibrate/RGBCalibrate.ino
@@ -23,12 +23,14 @@
 //
 //////////////////////////////////////////////////
 
-#define NUM_LEDS 6
+#define NUM_LEDS 7
 
-// Data pin that led data will be written out over
-#define DATA_PIN 6
+// For led chips like WS2812, which have a data line, ground, and power, you just
+// need to define DATA_PIN.  For led chipsets that are SPI based (four wires - data, clock,
+// ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
 // Clock pin only needed for SPI based chipsets when not using hardware SPI
-//#define CLOCK_PIN 8
+#define DATA_PIN 3
+#define CLOCK_PIN 13
 
 CRGB leds[NUM_LEDS];
 
@@ -36,27 +38,48 @@ void setup() {
     // sanity check delay - allows reprogramming if accidently blowing power w/leds
     delay(2000);
 
-    // Uncomment one of the following lines for your leds arrangement.
-    // FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // Uncomment/edit one of the following lines for your leds arrangement.
+    // ## Clockless types ##
+    // FastLED.addLeds<SM16703, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1829, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1812, DATA_PIN, RGB>(leds, NUM_LEDS);
     // FastLED.addLeds<TM1809, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1804, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<TM1803, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS1904, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<UCS2903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2852, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<WS2812B, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<GS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SK6812, DATA_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<APA106, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<PL9823, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<SK6822, DATA_PIN, RGB>(leds, NUM_LEDS);
     // FastLED.addLeds<WS2811, DATA_PIN, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<WS2812, DATA_PIN, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<WS2812B, DATA_PIN, GRB>(leds, NUM_LEDS);
-    // FastLED.setBrightness(CRGB(255,255,255));
+    // FastLED.addLeds<WS2813, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<APA104, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2811_400, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<GE8822, DATA_PIN, RGB>(leds, NUM_LEDS);
     // FastLED.addLeds<GW6205, DATA_PIN, RGB>(leds, NUM_LEDS);
     // FastLED.addLeds<GW6205_400, DATA_PIN, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<UCS1903, DATA_PIN, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<UCS1903B, DATA_PIN, RGB>(leds, NUM_LEDS);
-
-    // FastLED.addLeds<WS2801, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<SM16716, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<LPD8806, 9, 10, RGB>(leds, NUM_LEDS);
-    FastLED.addLeds<LPD6803, RGB>(leds, NUM_LEDS);
-
+    // FastLED.addLeds<LPD1886, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<LPD1886_8BIT, DATA_PIN, RGB>(leds, NUM_LEDS);
+    // ## Clocked (SPI) types ##
+    // FastLED.addLeds<LPD6803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
+    // FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // GRB ordering is typical
     // FastLED.addLeds<WS2801, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<WS2803, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
     // FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
-    // FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
+    // FastLED.addLeds<P9813, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<APA102, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+    // FastLED.addLeds<SK9822, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);  // BGR ordering is typical
+
+    // FastLED.setBrightness(CRGB(255,255,255));
 }
 
 void loop() {
@@ -69,4 +92,4 @@ void loop() {
     leds[6] = CRGB(0,0,0);
     FastLED.show();
     delay(1000);
-}
\ No newline at end of file
+}
-- 
cgit v1.2.3