diff options
Diffstat (limited to 'GcodeProcessorLib/gcode_comment_processor.cpp')
| -rw-r--r-- | GcodeProcessorLib/gcode_comment_processor.cpp | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/GcodeProcessorLib/gcode_comment_processor.cpp b/GcodeProcessorLib/gcode_comment_processor.cpp new file mode 100644 index 0000000..e9acf3c --- /dev/null +++ b/GcodeProcessorLib/gcode_comment_processor.cpp @@ -0,0 +1,310 @@ +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Gcode Processor Library +// +// Tools for parsing gcode and calculating printer state from parsed gcode commands. +// +// Copyright(C) 2020 - Brad Hochgesang +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// This program is free software : you can redistribute it and/or modify +// it under the terms of the GNU Affero General Public License as published +// by the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the +// GNU Affero General Public License for more details. +// +// +// You can contact the author at the following email address: +// FormerLurker@pm.me +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#include "gcode_comment_processor.h" + +gcode_comment_processor::gcode_comment_processor() +{ + current_section_ = section_type_no_section; + processing_type_ = comment_process_type_unknown; +} + +gcode_comment_processor::~gcode_comment_processor() +{ +} + +comment_process_type gcode_comment_processor::get_comment_process_type() +{ + return processing_type_; +} + +void gcode_comment_processor::update(position& pos) +{ + if (processing_type_ == comment_process_type_off) + return; + + if (current_section_ != section_type_no_section) + { + update_feature_from_section(pos); + return; + } + + if (processing_type_ == comment_process_type_unknown || processing_type_ == comment_process_type_slic3r_pe) + { + if (update_feature_for_slic3r_pe_comment(pos, pos.command.comment)) + processing_type_ = comment_process_type_slic3r_pe; + } + +} + +bool gcode_comment_processor::update_feature_for_slic3r_pe_comment(position& pos, std::string &comment) const +{ + if (comment == "perimeter" || comment == "move to first perimeter point") + { + pos.feature_type_tag = feature_type_unknown_perimeter_feature; + return true; + } + if (comment == "infill" || comment == "move to first infill point") + { + pos.feature_type_tag = feature_type_infill_feature; + return true; + } + if (comment == "infill(bridge)" || comment == "move to first infill(bridge) point") + { + pos.feature_type_tag = feature_type_bridge_feature; + return true; + } + if (comment == "skirt" || comment == "move to first skirt point") + { + pos.feature_type_tag = feature_type_skirt_feature; + return true; + } + return false; +} + +void gcode_comment_processor::update_feature_from_section(position& pos) const +{ + if (processing_type_ == comment_process_type_off || current_section_ == section_type_no_section) + return; + + switch (current_section_) + { + case(section_type_outer_perimeter_section): + pos.feature_type_tag = feature_type_outer_perimeter_feature; + break; + case(section_type_inner_perimeter_section): + pos.feature_type_tag = feature_type_inner_perimeter_feature; + break; + case(section_type_skirt_section): + pos.feature_type_tag = feature_type_skirt_feature; + break; + case(section_type_solid_infill_section): + pos.feature_type_tag = feature_type_solid_infill_feature; + break; + case(section_type_ooze_shield_section): + pos.feature_type_tag = feature_type_ooze_shield_feature; + break; + case(section_type_infill_section): + pos.feature_type_tag = feature_type_infill_feature; + break; + case(section_type_prime_pillar_section): + pos.feature_type_tag = feature_type_prime_pillar_feature; + break; + case(section_type_gap_fill_section): + pos.feature_type_tag = feature_type_gap_fill_feature; + break; + case(section_type_no_section): + // Do Nothing + break; + } +} + +void gcode_comment_processor::update(std::string & comment) +{ + switch(processing_type_) + { + case comment_process_type_off: + break; + case comment_process_type_unknown: + update_unknown_section(comment); + break; + case comment_process_type_cura: + update_cura_section(comment); + break; + case comment_process_type_slic3r_pe: + update_slic3r_pe_section(comment); + break; + case comment_process_type_simplify_3d: + update_simplify_3d_section(comment); + break; + } +} + +void gcode_comment_processor::update_unknown_section(std::string & comment) +{ + if (comment.length() == 0) + return; + + if (update_cura_section(comment)) + { + processing_type_ = comment_process_type_cura; + return; + } + + if (update_simplify_3d_section(comment)) + { + processing_type_ = comment_process_type_simplify_3d; + return; + } + if(update_slic3r_pe_section(comment)) + { + processing_type_ = comment_process_type_slic3r_pe; + return; + } +} + +bool gcode_comment_processor::update_cura_section(std::string &comment) +{ + if (comment == "TYPE:WALL-OUTER") + { + current_section_ = section_type_outer_perimeter_section; + return true; + } + else if (comment == "TYPE:WALL-INNER") + { + current_section_ = section_type_inner_perimeter_section; + return true; + } + if (comment == "TYPE:FILL") + { + current_section_ = section_type_infill_section; + return true; + } + if (comment == "TYPE:SKIN") + { + current_section_ = section_type_solid_infill_section; + return true; + } + if (comment.rfind("LAYER:", 0) != std::string::npos || comment.rfind(";MESH:NONMESH", 0) != std::string::npos) + { + current_section_ = section_type_no_section; + return false; + } + if (comment == "TYPE:SKIRT") + { + current_section_ = section_type_skirt_section; + return true; + } + return false; +} + +bool gcode_comment_processor::update_simplify_3d_section(std::string &comment) +{ + // Apparently simplify 3d added the word 'feature' to the their feature comments + // at some point to make my life more difficult :P + if (comment.rfind("feature", 0) != std::string::npos) + { + if (comment == "feature outer perimeter") + { + current_section_ = section_type_outer_perimeter_section; + return true; + } + if (comment == "feature inner perimeter") + { + current_section_ = section_type_inner_perimeter_section; + return true; + } + if (comment == "feature infill") + { + current_section_ = section_type_infill_section; + return true; + } + if (comment == "feature solid layer") + { + current_section_ = section_type_solid_infill_section; + return true; + } + if (comment == "feature skirt") + { + current_section_ = section_type_skirt_section; + return true; + } + if (comment == "feature ooze shield") + { + current_section_ = section_type_ooze_shield_section; + return true; + } + if (comment == "feature prime pillar") + { + current_section_ = section_type_prime_pillar_section; + return true; + } + if (comment == "feature gap fill") + { + current_section_ = section_type_gap_fill_section; + return true; + } + } + else + { + if (comment == "outer perimeter") + { + current_section_ = section_type_outer_perimeter_section; + return true; + } + if (comment == "inner perimeter") + { + current_section_ = section_type_inner_perimeter_section; + return true; + } + if (comment == "infill") + { + current_section_ = section_type_infill_section; + return true; + } + if (comment == "solid layer") + { + current_section_ = section_type_solid_infill_section; + return true; + } + if (comment == "skirt") + { + current_section_ = section_type_skirt_section; + return true; + } + if (comment == "ooze shield") + { + current_section_ = section_type_ooze_shield_section; + return true; + } + + if (comment == "prime pillar") + { + current_section_ = section_type_prime_pillar_section; + return true; + } + + if (comment == "gap fill") + { + current_section_ = section_type_gap_fill_section; + return true; + } + } + + + return false; +} + +bool gcode_comment_processor::update_slic3r_pe_section(std::string &comment) +{ + if (comment == "CP TOOLCHANGE WIPE") + { + current_section_ = section_type_prime_pillar_section; + return true; + } + if (comment == "CP TOOLCHANGE END") + { + current_section_ = section_type_no_section; + return true; + } + return false; +} + |