diff options
author | JackyHe398 <62739796+JackyHe398@users.noreply.github.com> | 2022-09-12 05:12:06 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-09-12 05:12:06 +0300 |
commit | 721c764746bb958a015c7b9195262c943fde2c03 (patch) | |
tree | c8ded8c3df3be64b61665fb8f8552f49e0351ba6 | |
parent | a530bf2421341209a2c8c6fa140c9d2047f1029c (diff) |
Update printer-anycubic-vyper-2021.cfg (#5692)
* Update printer-anycubic-vyper-2021.cfg
better pause and end print, beeper support, mroe accurate value.
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
delete unnecessary gcode
* Update printer-anycubic-vyper-2021.cfg
remove unneccessary part.
* Update printer-anycubic-vyper-2021.cfg
* Update printer-anycubic-vyper-2021.cfg
according to https://www.klipper3d.org/Example_Configs.html point 7f
delete field values that are set to their default value
* Update printer-anycubic-vyper-2021.cfg
small change
* Update printer-anycubic-vyper-2021.cfg
-rw-r--r-- | config/printer-anycubic-vyper-2021.cfg | 16 |
1 files changed, 14 insertions, 2 deletions
diff --git a/config/printer-anycubic-vyper-2021.cfg b/config/printer-anycubic-vyper-2021.cfg index 7ef7fa5b2..08cf56e8d 100644 --- a/config/printer-anycubic-vyper-2021.cfg +++ b/config/printer-anycubic-vyper-2021.cfg @@ -70,7 +70,7 @@ step_pin: PB4 dir_pin: !PB3 enable_pin: !PA15 microsteps: 16 -rotation_distance: 22.6789511 #has to be calibrated by everyone +rotation_distance: 22.76500 #has to be calibrated by everyone, official document: diameter = 7.25 gear_ratio: 50:17 full_steps_per_rotation: 200 nozzle_diameter: 0.400 @@ -108,13 +108,25 @@ z_offset: 0 activate_gcode: probe_reset +[output_pin BEEPER_PIN] +pin: PB15 +pwm: True +value: 0 +shutdown_value: 0 +cycle_time: 0.001 +scale: 1 + [output_pin probe_reset_pin] pin: PB13 +[output_pin LED] +pin: mcu:PA13 +pwm: False +value: 0 + [bed_mesh] mesh_min: 15,15 mesh_max: 230, 230 -probe_count: 6,6 [filament_switch_sensor runout] pause_on_runout: True |