stm32: Use new CONFIG_USB to determine if USB needs to be configured

Introduce a CONFIG_USB build symbol that is set whenever
CONFIG_USBSERIAL or CONFIG_USBCANBUS is set.  Use that symbol during
setup so that the USB controller is properly initialized for both usb
serial and usb canbus bridge configurations.

This fixes the clock configuration for usb canbus bridge mode on
stm32f446.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

5 files changed, 14 insertions, 12 deletions

diff --git a/src/Kconfig b/src/Kconfig
index d8d8a19e2..08a57c16f 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -57,18 +57,21 @@ config USBSERIAL
     bool
 config USBCANBUS
     bool
+config USB
+    bool
+    default y if USBSERIAL || USBCANBUS
 config USB_VENDOR_ID
     default 0x1d50
 config USB_DEVICE_ID
     default 0x614e
 config USB_SERIAL_NUMBER_CHIPID
-    depends on HAVE_CHIPID && (USBSERIAL || USBCANBUS)
+    depends on USB && HAVE_CHIPID
     default y
 config USB_SERIAL_NUMBER
     default "12345"
 
 menu "USB ids"
-    depends on (USBSERIAL || USBCANBUS) && LOW_LEVEL_OPTIONS
+    depends on USB && LOW_LEVEL_OPTIONS
 config USB_VENDOR_ID
     hex "USB vendor ID" if USBSERIAL
 config USB_DEVICE_ID
diff --git a/src/stm32/stm32f0.c b/src/stm32/stm32f0.c
index 98933b9dd..e63f1b5b4 100644
--- a/src/stm32/stm32f0.c
+++ b/src/stm32/stm32f0.c
@@ -86,7 +86,7 @@ pll_setup(void)
 
     // Setup CFGR3 register
     uint32_t cfgr3 = RCC_CFGR3_I2C1SW;
-#if CONFIG_USBSERIAL
+#if CONFIG_USB
         // Select PLL as source for USB clock
         cfgr3 |= RCC_CFGR3_USBSW;
 #endif
@@ -109,7 +109,7 @@ hsi48_setup(void)
         ;
 
     // Enable USB clock recovery
-    if (CONFIG_USBSERIAL) {
+    if (CONFIG_USB) {
         enable_pclock(CRS_BASE);
         CRS->CR |= CRS_CR_AUTOTRIMEN | CRS_CR_CEN;
     }
@@ -150,7 +150,7 @@ usb_reboot_for_dfu_bootloader(void)
 static void
 check_usb_dfu_bootloader(void)
 {
-    if (!CONFIG_USBSERIAL || !CONFIG_MACH_STM32F0x2
+    if (!CONFIG_USB || !CONFIG_MACH_STM32F0x2
         || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
         return;
     *(uint64_t*)USB_BOOT_FLAG_ADDR = 0;
@@ -204,8 +204,7 @@ armcm_main(void)
     FLASH->ACR = (1 << FLASH_ACR_LATENCY_Pos) | FLASH_ACR_PRFTBE;
 
     // Configure main clock
-    if (CONFIG_MACH_STM32F0x2 && CONFIG_STM32_CLOCK_REF_INTERNAL
-        && CONFIG_USBSERIAL)
+    if (CONFIG_MACH_STM32F0x2 && CONFIG_STM32_CLOCK_REF_INTERNAL && CONFIG_USB)
         hsi48_setup();
     else
         pll_setup();
diff --git a/src/stm32/stm32f4.c b/src/stm32/stm32f4.c
index 0b032de73..4f1dc084b 100644
--- a/src/stm32/stm32f4.c
+++ b/src/stm32/stm32f4.c
@@ -139,7 +139,7 @@ enable_clock_stm32f446(void)
         ;
 
     // Enable 48Mhz USB clock
-    if (CONFIG_USBSERIAL) {
+    if (CONFIG_USB) {
         uint32_t ref = (CONFIG_STM32_CLOCK_REF_INTERNAL
                         ? 16000000 : CONFIG_CLOCK_REF_FREQ);
         uint32_t plls_base = 2000000, plls_freq = FREQ_USB * 4;
@@ -220,7 +220,7 @@ usb_reboot_for_dfu_bootloader(void)
 static void
 check_usb_dfu_bootloader(void)
 {
-    if (!CONFIG_USBSERIAL || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
+    if (!CONFIG_USB || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
         return;
     *(uint64_t*)USB_BOOT_FLAG_ADDR = 0;
     uint32_t *sysbase = (uint32_t*)0x1fff0000;
diff --git a/src/stm32/stm32g0.c b/src/stm32/stm32g0.c
index 36191ebf7..63edcbaac 100644
--- a/src/stm32/stm32g0.c
+++ b/src/stm32/stm32g0.c
@@ -123,7 +123,7 @@ usb_reboot_for_dfu_bootloader(void)
 static void
 check_usb_dfu_bootloader(void)
 {
-    if (!CONFIG_USBSERIAL || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
+    if (!CONFIG_USB || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
         return;
     *(uint64_t*)USB_BOOT_FLAG_ADDR = 0;
     uint32_t *sysbase = (uint32_t*)0x1fff0000;
diff --git a/src/stm32/stm32h7.c b/src/stm32/stm32h7.c
index 565353dc2..122ce64be 100644
--- a/src/stm32/stm32h7.c
+++ b/src/stm32/stm32h7.c
@@ -171,7 +171,7 @@ clock_setup(void)
         ;
 
     // Configure HSI48 clock for USB
-    if (CONFIG_USBSERIAL) {
+    if (CONFIG_USB) {
         SET_BIT(RCC->CR, RCC_CR_HSI48ON);
         while((RCC->CR & RCC_CR_HSI48RDY) == 0);
         SET_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);
@@ -205,7 +205,7 @@ usb_reboot_for_dfu_bootloader(void)
 static void
 check_usb_dfu_bootloader(void)
 {
-    if (!CONFIG_USBSERIAL || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
+    if (!CONFIG_USB || *(uint64_t*)USB_BOOT_FLAG_ADDR != USB_BOOT_FLAG)
         return;
     *(uint64_t*)USB_BOOT_FLAG_ADDR = 0;
     uint32_t *sysbase = (uint32_t*)0x1FF09800;