Update quality profiles from material research

This locks initial layer speed at 20, without scaling from the normal print speed. It also adjusts some jerk and speed of support infill.

16 files changed, 28 insertions, 20 deletions

diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
index 97733a9858..00d93f3575 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
@@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10
 prime_tower_size = 16
 skin_overlap = 20
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
index f635afd255..066a044ee0 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
@@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 16
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
index fc5be26a52..850af33c27 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
@@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 prime_tower_size = 16
 speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
index 91f55b3b6d..3793bf8b5e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 16
 speed_print = 55
-speed_layer_0 = =round(speed_print * 30 / 55)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
index b6d6bc80b9..7a536ce033 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
@@ -17,7 +17,7 @@ material_standby_temperature = 100
 prime_tower_size = 17
 skin_overlap = 20
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
index 3649b3fb5c..96467fe36c 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
@@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
index cc5cbcea30..1fd6167e67 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
@@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
index 68f8419640..5ad1ef6b43 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
@@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 55
-speed_layer_0 = =round(speed_print * 30 / 55)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg
index cd411fc241..eb56b0aa4c 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -18,6 +18,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg
index c0b28ca6b7..c5faa17a2b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 80
-speed_layer_0 = =round(speed_print * 30 / 80)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 80)
 speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg
index eff3a3971b..1a6db5e3b5 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg
@@ -20,7 +20,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 30 / 60)
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg
index 84d9a5a001..c7a7be37c0 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -18,6 +18,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
+speed_layer_0 = 20
 top_bottom_thickness = 1
 wall_thickness = 1
 
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
index bf10c55ae9..83fd52a1fd 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -12,13 +12,15 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 skin_overlap = 20
 support_interface_height = 0.8
 prime_tower_enable = False
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)
 
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
index 2c6cb4af1a..582d6e9c76 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -12,13 +12,14 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 skin_overlap = 15
 support_interface_height = 0.8
 prime_tower_enable = False
-
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
index 331539dedf..fc6be3ea3d 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@@ -12,12 +12,14 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 support_infill_rate = 25
 support_interface_height = 0.8
 material_standby_temperature = 100
 prime_tower_enable = False
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)
 
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
index 7ffda14a08..5eb690fa99 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -12,12 +12,13 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 support_infill_rate = 25
 support_interface_height = 0.8
 material_standby_temperature = 100
 prime_tower_enable = False
-
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)