Merge branch 'taz5-nozzle-size' into LulzBot-devel

21 files changed, 2359 insertions, 13 deletions

diff --git a/Cura/gui/configWizard.py b/Cura/gui/configWizard.py
index fb94c7cc46..026a95835d 100644
--- a/Cura/gui/configWizard.py
+++ b/Cura/gui/configWizard.py
@@ -421,6 +421,7 @@ class MachineSelectPage(InfoPage):
 
 	def OnTaz5Select(self, e):
 		wx.wizard.WizardPageSimple.Chain(self, self.GetParent().taz5NozzleSelectPage)
+		wx.wizard.WizardPageSimple.Chain(self.GetParent().taz5NozzleSelectPage, self.GetParent().lulzbotReadyPage)
 
 	def OnOtherSelect(self, e):
 		wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
@@ -428,6 +429,9 @@ class MachineSelectPage(InfoPage):
 	def AllowNext(self):
 		return True
 
+	def AllowBack(self):
+		return False
+
 	def StoreData(self):
 		profile.putProfileSetting('retraction_enable', 'True')
 		if self.Ultimaker2Radio.GetValue() or self.Ultimaker2GoRadio.GetValue() or self.Ultimaker2ExtRadio.GetValue():
@@ -507,8 +511,8 @@ class MachineSelectPage(InfoPage):
 				profile.putMachineSetting('machine_width', '298')
 				profile.putMachineSetting('machine_depth', '275')
 				profile.putMachineSetting('machine_height', '250')
-				profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
 				profile.putMachineSetting('serial_baud', '115200')
+				# Machine type and name are set in the nozzle select page
 			else:
 				profile.putMachineSetting('machine_width', '155')
 				profile.putMachineSetting('machine_depth', '155')
@@ -1018,32 +1022,29 @@ class Taz5NozzleSelectPage(InfoPage):
 		self.AddText(_(' '))
 		self.AddText(_('Please select nozzle size:'))
 		self.Nozzle35Radio = self.AddRadioButton("0.35 mm", style=wx.RB_GROUP)
-		self.Nozzle35Radio.Bind(wx.EVT_RADIOBUTTON, self.OnNozzleSelect)
+		self.Nozzle35Radio.SetValue(True)
 		self.Nozzle50Radio = self.AddRadioButton("0.5 mm")
-		self.Nozzle50Radio.Bind(wx.EVT_RADIOBUTTON, self.OnNozzleSelect)
-		self.Nozzle50Radio.SetValue(True)
 		self.AddText(_(' '))
 		self.AddSeperator()
 
-		self.AddText(_('If you are not sure which nozzle size you have please check this webpage: '))
+		self.AddText(_('If you are not sure which nozzle size you have'))
+		self.AddText(_('please check this webpage: '))
 		button = self.AddButton(Taz5NozzleSelectPage.url)
 		button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
 
 	def OnUrlClick(self, e):
 		webbrowser.open(Taz5NozzleSelectPage.url)
 
-	def OnNozzleSelect(self, e):
-		wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
-
 	def StoreData(self):
 		if self.Nozzle35Radio.GetValue():
 			profile.putProfileSetting('nozzle_size', '0.35')
 			profile.putMachineSetting('machine_name', 'LulzBot TAZ 5 (0.35 nozzle)')
-			#TODO: Use existing profiles
+			profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
+
 		else:
 			profile.putProfileSetting('nozzle_size', '0.5')
 			profile.putMachineSetting('machine_name', 'LulzBot TAZ 5 (0.5 nozzle)')
-			#TODO: Use new profiles
+			profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5_05nozzle')
 
 	def OnPageChanging(self, e):
 		e.GetPage().StoreData()
@@ -1086,7 +1087,6 @@ class ConfigWizard(wx.wizard.Wizard):
 		wx.wizard.WizardPageSimple.Chain(self.printrbotSelectType, self.otherMachineInfoPage)
 		wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
 		wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.lulzbotReadyPage)
-		wx.wizard.WizardPageSimple.Chain(self.taz5NozzleSelectPage, self.lulzbotReadyPage)
 
 		self.FitToPage(self.machineSelectPage)
 		self.GetPageAreaSizer().Add(self.machineSelectPage)
diff --git a/Cura/util/settings/__init__.py b/Cura/util/settings/__init__.py
index a4aa91e018..aa29a1a605 100644
--- a/Cura/util/settings/__init__.py
+++ b/Cura/util/settings/__init__.py
@@ -1,3 +1,3 @@
 from lulzbotMini import lulzbot_mini_settings
 from lulzbotTAZ4 import lulzbot_taz4_settings
-from lulzbotTAZ5 import lulzbot_taz5_settings
+from lulzbotTAZ5 import lulzbot_taz5_settings, lulzbot_taz5_05nozzle_settings
diff --git a/Cura/util/settings/lulzbotTAZ5.py b/Cura/util/settings/lulzbotTAZ5.py
index e2ceff8df7..ea857df97c 100644
--- a/Cura/util/settings/lulzbotTAZ5.py
+++ b/Cura/util/settings/lulzbotTAZ5.py
@@ -73,3 +73,24 @@ lulzbot_taz5_settings = [{'Ini': 'taz5'},
 						 {'Material': '2_abs', 'Profile': '3_high',
 						  'Settings': [('layer_height', '0.16'),
 									   ('solid_layer_thickness', '0.74')]}]
+
+lulzbot_taz5_05nozzle_settings = [ {'Material': '1_hips', 'Profile': '1_low',
+									'Ini': "hips_low"},
+								   {'Material': '1_hips', 'Profile': '2_normal',
+									'Ini': "hips_normal"},
+								   {'Material': '1_hips', 'Profile': '3_high',
+									'Ini': "hips_high"},
+
+								   {'Material': '2_abs', 'Profile': '1_low',
+									'Ini': "abs_low"},
+								   {'Material': '2_abs', 'Profile': '2_normal',
+									'Ini': "abs_normal"},
+								   {'Material': '2_abs', 'Profile': '3_high',
+									'Ini': "abs_high"},
+
+								   {'Material': '3_pla', 'Profile': '1_low',
+									'Ini': "pla_low"},
+								   {'Material': '3_pla', 'Profile': '2_normal',
+									'Ini': "pla_normal"},
+								   {'Material': '3_pla', 'Profile': '3_high',
+									'Ini': "pla_high"}]
diff --git a/Cura/util/simpleModeSettings.py b/Cura/util/simpleModeSettings.py
index 4b97755a8c..ef47f74d9a 100644
--- a/Cura/util/simpleModeSettings.py
+++ b/Cura/util/simpleModeSettings.py
@@ -1,6 +1,7 @@
 from Cura.util.settings import lulzbot_mini_settings, \
 		lulzbot_taz4_settings, \
-		lulzbot_taz5_settings
+		lulzbot_taz5_settings, \
+		lulzbot_taz5_05nozzle_settings
 
 import ConfigParser as configparser
 from Cura.util import profile
@@ -45,6 +46,7 @@ class SimpleModeSettings(object):
 	settings = {"lulzbot_mini": lulzbot_mini_settings,
 				"lulzbot_TAZ_4": lulzbot_taz4_settings,
 				"lulzbot_TAZ_5": lulzbot_taz5_settings,
+				"lulzbot_TAZ_5_05nozzle": lulzbot_taz5_05nozzle_settings,
 				None: {}}
 
 
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
new file mode 100644
index 0000000000..f5aea85f41
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
@@ -0,0 +1,255 @@
+[profile]
+layer_height = 0.18
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
new file mode 100644
index 0000000000..3f3a3d9103
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
@@ -0,0 +1,255 @@
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
new file mode 100644
index 0000000000..e8d1fbbb66
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
@@ -0,0 +1,255 @@
+[profile]
+layer_height = 0.25
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 55
+inset0_speed = 45
+insetx_speed = 50
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
new file mode 100644
index 0000000000..40591d4845
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
@@ -0,0 +1,254 @@
+[profile]
+layer_height = 0.18
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 30
+inset0_speed = 20
+insetx_speed = 25
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next ex
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
new file mode 100644
index 0000000000..cf8c61d177
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
@@ -0,0 +1,254 @@
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 70
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next ex
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
new file mode 100644
index 0000000000..4a84a12142
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
@@ -0,0 +1,254 @@
+[profile]
+layer_height = 0.25
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next ex
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
new file mode 100644
index 0000000000..ef69b6da20
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
@@ -0,0 +1,254 @@
+[profile]
+layer_height = 0.14
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
new file mode 100644
index 0000000000..53218c2664
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
@@ -0,0 +1,254 @@
+[profile]
+layer_height = 0.38
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
new file mode 100644
index 0000000000..ea541c3aea
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
@@ -0,0 +1,254 @@
+[profile]
+layer_height = 0.25
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/1_hips.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/1_hips.ini
new file mode 100644
index 0000000000..4efba8a65c
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/1_hips.ini
@@ -0,0 +1,3 @@
+[info]
+name = HIPS
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/2_abs.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/2_abs.ini
new file mode 100644
index 0000000000..af4e1c23fb
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/2_abs.ini
@@ -0,0 +1,3 @@
+[info]
+name = ABS
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/3_pla.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/3_pla.ini
new file mode 100644
index 0000000000..8917ab88b1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/3_pla.ini
@@ -0,0 +1,3 @@
+[info]
+name = PLA
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/1_support.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/1_support.ini
new file mode 100644
index 0000000000..807e5e1231
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/1_support.ini
@@ -0,0 +1,10 @@
+[info]

+name = Print support structure

+

+[profile]

+support = Everywhere

+support_type = Lines

+support_angle = 45

+support_fill_rate = 30

+support_xy_distance = 0.7

+support_z_distance = 0.05

diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/2_brim.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/2_brim.ini
new file mode 100644
index 0000000000..8b641c4c21
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/2_brim.ini
@@ -0,0 +1,5 @@
+[info]

+name = Print Brim

+

+[profile]

+platform_adhesion = Brim

diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/1_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/1_low.ini
new file mode 100644
index 0000000000..4c62867d7e
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/1_low.ini
@@ -0,0 +1,3 @@
+[info]

+name = Fast print

+

diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/2_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/2_normal.ini
new file mode 100644
index 0000000000..a199f03d66
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/2_normal.ini
@@ -0,0 +1,4 @@
+[info]

+name = Normal print

+

+

diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/3_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/3_high.ini
new file mode 100644
index 0000000000..f4ed49a017
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/3_high.ini
@@ -0,0 +1,3 @@
+[info]

+name = High quality

+