Update anycubic_i3_mega_s.def.json

Added more Cura settings

1 files changed, 1 insertions, 1 deletions

diff --git a/resources/definitions/anycubic_i3_mega_s.def.json b/resources/definitions/anycubic_i3_mega_s.def.json
index fb6f9384b0..d87c416d9a 100644
--- a/resources/definitions/anycubic_i3_mega_s.def.json
+++ b/resources/definitions/anycubic_i3_mega_s.def.json
@@ -29,7 +29,7 @@
         "machine_center_is_zero": { "default_value": false },
         "gantry_height": { "value": "0" },
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": ";Material Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\nG21                                        ; metric values \nG90                                        ; absolute positioning \nM82                                        ; set extruder to absolute mode \nM107                                       ; start with the fan off \nM140 S{material_bed_temperature_layer_0}   ; Start heating the bed \nG4 S60                                     ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0}   ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500                            ; BEEP heating done \nG28 X0 Y10 Z0                              ; move X/Y to min endstops \nM420 S1                                    ; Enable leveling \nM420 Z2.0                                  ; Set leveling fading height to 2 mm \nG0 Z0.15                                   ; lift nozzle a bit \nG92 E0                                     ; zero the extruded length \nG1 X50 E20 F500                            ; Extrude 20mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-2 F500                                ; Retract a little \nG1 X120 F4000                              ; Quickly wipe away from the filament line`" },
+        "machine_start_gcode": { "default_value": ";Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21                                        ; metric values \nG90                                        ; absolute positioning \nM82                                        ; set extruder to absolute mode \nM107                                       ; start with the fan off \nM140 S{material_bed_temperature_layer_0}   ; Start heating the bed \nG4 S60                                     ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0}   ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500                            ; BEEP heating done \nG28 X0 Y10 Z0                              ; move X/Y to min endstops \nM420 S1                                    ; Enable leveling \nM420 Z2.0                                  ; Set leveling fading height to 2 mm \nG0 Z0.15                                   ; lift nozzle a bit \nG92 E0                                     ; zero the extruded length \nG1 X50 E20 F500                            ; Extrude 20mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-2 F500                                ; Retract a little \nG1 X120 F4000                              ; Quickly wipe away from the filament line`" },
         "machine_end_gcode": { "default_value": "M104 S0                                    ; Extruder off \nM140 S0                                    ; Heatbed off \nM107                                       ; Fan off \nG91                                        ; relative positioning \nG1 E-5 F300                                ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0                                  ; homing \nG1 Y180 F2000                              ; reset feedrate \nM84                                        ; disable stepper motors \nG90                                        ; absolute positioning \nM300 S440 P200                             ; Make Print Completed Tones \nM300 S660 P250                             ; beep \nM300 S880 P300                             ; beep" },
 
         "machine_max_acceleration_x": { "value": 3000 },