Add Cheetah profiles for TAZ4/TAZ5/Mini

18 files changed, 1765 insertions, 0 deletions

diff --git a/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/high-quality/profile.ini
new file mode 100644
index 0000000000..43635e18dc
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/high-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/high-speed/profile.ini
new file mode 100644
index 0000000000..519778bd94
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/high-speed/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-speed_TAZ_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/material.ini b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/material.ini
new file mode 100644
index 0000000000..dba63ea16b
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/material.ini
@@ -0,0 +1,7 @@
+[info]
+name = Cheetah (NinjaTek)
+material_types = Expert
+order = 1
+description =                     Bed preparation required: 
+                    Apply a PVA-based glue stick 
+                    to bed surface before printing.
diff --git a/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/medium-quality/profile.ini
new file mode 100644
index 0000000000..73c952d35a
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4_FlexystruderV2/cheetah/medium-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_flexystruder_v2/cheetah_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/high-quality/profile.ini
new file mode 100644
index 0000000000..43635e18dc
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/high-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/high-speed/profile.ini
new file mode 100644
index 0000000000..519778bd94
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/high-speed/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-speed_TAZ_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/material.ini b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/material.ini
new file mode 100644
index 0000000000..dba63ea16b
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/material.ini
@@ -0,0 +1,7 @@
+[info]
+name = Cheetah (NinjaTek)
+material_types = Expert
+order = 1
+description =                     Bed preparation required: 
+                    Apply a PVA-based glue stick 
+                    to bed surface before printing.
diff --git a/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/medium-quality/profile.ini
new file mode 100644
index 0000000000..73c952d35a
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_FlexystruderV2/cheetah/medium-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_flexystruder_v2/cheetah_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_mini_flexystruder/cheetah/high-quality/profile.ini b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/high-quality/profile.ini
new file mode 100644
index 0000000000..33effd1b90
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/high-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_mini_flexystruder/cheetah/high-speed/profile.ini b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/high-speed/profile.ini
new file mode 100644
index 0000000000..d60fa65900
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/high-speed/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_mini_flexystruder/cheetah/material.ini b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/material.ini
new file mode 100644
index 0000000000..dba63ea16b
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/material.ini
@@ -0,0 +1,7 @@
+[info]
+name = Cheetah (NinjaTek)
+material_types = Expert
+order = 1
+description =                     Bed preparation required: 
+                    Apply a PVA-based glue stick 
+                    to bed surface before printing.
diff --git a/resources/quickprint/lulzbot_mini_flexystruder/cheetah/medium-quality/profile.ini b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/medium-quality/profile.ini
new file mode 100644
index 0000000000..9c6d59ec26
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini_flexystruder/cheetah/medium-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/Mini_flexystruder_v2/cheetah_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..9477b327bc
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,300 @@
+[profile]
+layer_height = 0.2
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = .8
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 14
+print_temperature = 227
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 55
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.90
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100
+retraction_speed = 4
+retraction_amount = 2
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 36
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 33
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 10
+fan_speed_max = 30
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M907 X675                    ; reduce extruder torque for safety
+	M109 S160                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F45             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S180                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F45                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
+	G1 X145 F1000                                ; move to cooling positioning
+	G1 Y175 F1000                                ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..c3b141b8a9
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,300 @@
+[profile]
+layer_height = 0.4
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 1.2
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 14
+print_temperature = 227
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 55
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.90
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100
+retraction_speed = 4
+retraction_amount = 2
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 36
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 33
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 10
+fan_speed_max = 30
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M907 X675                    ; reduce extruder torque for safety
+	M109 S160                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F45             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S180                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F45                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
+	G1 X145 F1000                                ; move to cooling positioning
+	G1 Y175 F1000                                ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..5e884331ef
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/cheetah_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,300 @@
+[profile]
+layer_height = 0.3
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = .9
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 14
+print_temperature = 227
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 55
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.90
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100
+retraction_speed = 4
+retraction_amount = 2
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 36
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 33
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 10
+fan_speed_max = 30
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M907 X675                    ; reduce extruder torque for safety
+	M109 S160                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F45             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S180                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F45                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
+	G1 X145 F1000                                ; move to cooling positioning
+	G1 Y175 F1000                                ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-quality_TAZ_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..4eeaa68ff6
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,269 @@
+[profile]
+layer_height = 0.2
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 14
+print_temperature = 227
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 40
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.9
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 4
+retraction_amount = 2
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 36
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 33
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 3
+fan_speed_max = 10
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
+	M104 S0                        ; hotend off
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
+	G90                            ; absolute positioning
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 Print complete            ; progress indicator message
+	;Full slice settings: {profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-speed_TAZ_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-speed_TAZ_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..9679bb2182
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_high-speed_TAZ_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,270 @@
+[profile]
+layer_height = 0.4
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 14
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.9
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 4
+retraction_amount = 2
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 36
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 33
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 3
+fan_speed_max = 10
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	M104 S{print_temperature} ; change print temp for the current profile
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
+	M104 S0                        ; hotend off
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
+	G90                            ; absolute positioning
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 Print complete            ; progress indicator message
+	;Full slice settings: {profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..61749a5703
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/cheetah_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,269 @@
+[profile]
+layer_height = 0.3
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 14
+print_temperature = 227
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 40
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.9
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 4
+retraction_amount = 2
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 36
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 33
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 3
+fan_speed_max = 10
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
+	M104 S0                        ; hotend off
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
+	G90                            ; absolute positioning
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 Print complete            ; progress indicator message
+	;Full slice settings: {profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+