Update combing setting for Taz5 0.5 nozzle

9 files changed, 9 insertions, 9 deletions

diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
index f5aea85f41..3e91dece8c 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
index 3f3a3d9103..ba1be2749f 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
index e8d1fbbb66..f7cc8e6c33 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
index 40591d4845..ed7e3ca276 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
index cf8c61d177..7ba7801692 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
index 4a84a12142..a580a5a780 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
index ef69b6da20..303a31e866 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1.5
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
index 53218c2664..864f1f4291 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1.5
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
index ea541c3aea..12d11cc6c1 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
@@ -26,7 +26,7 @@ retraction_speed = 10
 retraction_amount = 1.5
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
-retraction_combing = True
+retraction_combing = All
 retraction_minimal_extrusion = 0.005
 retraction_hop = 0.1
 bottom_thickness = 0.425