Merge branch '4.8' of https://github.com/Ultimaker/Cura into 4.84.8.04.8

71 files changed, 2300 insertions, 1 deletions

diff --git a/plugins/UM3NetworkPrinting/resources/png/Ultimaker 2+ Connect.png b/plugins/UM3NetworkPrinting/resources/png/Ultimaker 2+ Connect.png
new file mode 100644
index 0000000000..9821dc0908
--- /dev/null
+++ b/plugins/UM3NetworkPrinting/resources/png/Ultimaker 2+ Connect.png
diff --git a/plugins/XmlMaterialProfile/product_to_id.json b/plugins/XmlMaterialProfile/product_to_id.json
index a48eb20a18..053c8d13f5 100644
--- a/plugins/XmlMaterialProfile/product_to_id.json
+++ b/plugins/XmlMaterialProfile/product_to_id.json
@@ -4,6 +4,7 @@
     "Ultimaker 2 Extended+": "ultimaker2_extended_plus",
     "Ultimaker 2 Go": "ultimaker2_go",
     "Ultimaker 2+": "ultimaker2_plus",
+    "Ultimaker 2+ Connect": "ultimaker2_plus_connect",
     "Ultimaker 3": "ultimaker3",
     "Ultimaker 3 Extended": "ultimaker3_extended",
     "Ultimaker S3": "ultimaker_s3",
@@ -12,4 +13,4 @@
     "Ultimaker Original+": "ultimaker_original_plus",
     "Ultimaker Original Dual Extrusion": "ultimaker_original_dual",
     "IMADE3D JellyBOX": "imade3d_jellybox"
-}
\ No newline at end of file
+}
diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json
new file mode 100644
index 0000000000..c0ddcf813f
--- /dev/null
+++ b/resources/definitions/ultimaker2_plus_connect.def.json
@@ -0,0 +1,82 @@
+{
+    "version": 2,
+    "name": "Ultimaker 2+ Connect",
+    "inherits": "ultimaker2",
+    "metadata": {
+        "author": "Ultimaker",
+        "manufacturer": "Ultimaker B.V.",
+        "weight": 1,
+        "file_formats": "application/x-ufp;text/x-gcode",
+        "platform": "ultimaker3_platform.obj",
+        "platform_texture": "Ultimaker2PlusConnectbackplate.png",
+        "preferred_variant_name": "0.4 mm",
+        "has_variants": true,
+        "has_materials": true,
+        "has_machine_materials": true,
+        "has_machine_quality": true,
+        "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
+        "first_start_actions": [],
+        "supported_actions": [],
+        "machine_extruder_trains":
+        {
+            "0": "ultimaker2_plus_connect_extruder_0"
+        },
+        "supports_usb_connection": false,
+        "supports_network_connection": true
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Ultimaker 2+ Connect" },
+        "machine_gcode_flavor": { "default_value": "Griffin" },
+        "machine_width": { "default_value": 223 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 205 },
+        "machine_show_variants": { "default_value": true },
+        "gantry_height": { "value": "52" },
+        "machine_nozzle_head_distance": { "default_value": 5 },
+        "machine_heat_zone_length": { "default_value": 20 },
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [ -44, 14 ],
+                [ -44, -34 ],
+                [ 64, 14 ],
+                [ 64, -34 ]
+            ]
+        },
+        "machine_disallowed_areas": 
+        {
+            "default_value": [
+                [[-115,  112.5], [ -83,  112.5], [ -85,  104.0], [-115,  104.0]],
+                [[ 115,  112.5], [ 115,  104.0], [ 104,  104.0], [ 102,  112.5]],
+                [[-115, -112.5], [-115, -104.0], [ -87, -104.0], [ -85, -112.5]],
+                [[ 115, -112.5], [ 104, -112.5], [ 106, -104.0], [ 115, -104.0]]
+            ]
+        },
+        "infill_wipe_dist": { "value": "0" },
+        "infill_overlap": { "value": "0" },
+        "infill_pattern": { "value": "'grid'" },
+        "speed_infill": { "value": "speed_print" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
+        "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
+        "optimize_wall_printing_order": { "value": "True" },
+        "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
+        "speed_support": { "value": "speed_wall_0" },
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "material_final_print_temperature": { "value": "material_print_temperature" },
+        "material_print_temperature_layer_0": { "value": "material_print_temperature" },
+        "machine_start_gcode": { "value": "''" },
+        "machine_end_gcode": { "value": "''" },
+        "material_bed_temperature": { "maximum_value": 110 },
+        "material_bed_temperature_layer_0": { "maximum_value": 110 },
+        "material_print_temperature": { "maximum_value": 260 },
+        "material_print_temperature_layer_0": { "maximum_value": 260 },
+        "material_initial_print_temperature": { "maximum_value": 260 },
+        "material_final_print_temperature": { "maximum_value": 260 },
+        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
+        "meshfix_maximum_deviation": { "value": "layer_height / 4" },		
+        "meshfix_maximum_travel_resolution": { "value": 0.5 },
+        "prime_blob_enable": { "enabled": true, "default_value": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" }
+    }
+}
diff --git a/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json b/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json
new file mode 100644
index 0000000000..871fdd3645
--- /dev/null
+++ b/resources/extruders/ultimaker2_plus_connect_extruder_0.def.json
@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "ultimaker2_plus_connect",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 2.85 }
+    }
+}
diff --git a/resources/images/Ultimaker2PlusConnectbackplate.png b/resources/images/Ultimaker2PlusConnectbackplate.png
new file mode 100644
index 0000000000..a8090cd769
--- /dev/null
+++ b/resources/images/Ultimaker2PlusConnectbackplate.png
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg
new file mode 100644
index 0000000000..43dc3faca8
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_abs
+variant = 0.25 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..286bebf854
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_abs
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
+speed_print = 55
+speed_travel = 150
+speed_layer_0 = =round(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 40 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_infill = =math.ceil(speed_print * 55 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg
new file mode 100644
index 0000000000..614744aada
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_abs
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+top_bottom_thickness = 0.72
+wall_thickness = 1.05
+speed_print = 45
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 30 / 45)
+speed_topbottom = =math.ceil(speed_print * 15 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..b84d4c9a3f
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_abs
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+speed_print = 45
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 30 / 45)
+speed_topbottom = =math.ceil(speed_print * 20 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..ac192c9685
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_abs
+variant = 0.6 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.5
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 20
+infill_sparse_density = 20
+speed_infill = =math.ceil(speed_print * 55 / 40)
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+top_bottom_thickness = 1.2
+wall_thickness = 1.59
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..d2cffb1c55
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_abs
+variant = 0.8 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.5
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 25
+cool_min_speed = 15
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg
new file mode 100644
index 0000000000..efb0361c6e
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_cpe
+variant = 0.25 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 2
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 15
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..a45f1d3e6c
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_cpe
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 40 / 45)
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
+speed_wall_0 = =math.ceil(speed_print * 30 / 45)
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
new file mode 100644
index 0000000000..bcbc535fe0
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_cpe
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 2
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 15
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 30 / 45)
+top_bottom_thickness = 0.72
+wall_thickness = 1.05
+speed_topbottom = =math.ceil(speed_print * 15 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..71f2916a3a
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_cpe
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 30 / 45)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..fabf1214ee
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_cpe
+variant = 0.6 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 8
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+top_bottom_thickness = 1.2
+wall_thickness = 1.59
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..96d2433ffa
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_cpe
+variant = 0.8 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 25
+cool_min_speed = 8
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
new file mode 100644
index 0000000000..ed6f5a0c5e
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_cpe_plus
+variant = 0.4 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = =cool_fan_speed * 25 / 50
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+line_width = 0.38
+raft_airgap = 0.37
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+raft_surface_line_width = 0.38
+speed_layer_0 = =math.ceil(speed_print * 15 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 20 / 25)
+speed_wall_0 = =math.ceil(speed_print * 20 / 25)
+speed_wall_x = =speed_print
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.26
+top_bottom_thickness = 1.5
+wall_thickness = 1.14
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..2aebe1e918
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_cpe_plus
+variant = 0.4 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = =cool_fan_speed * 25 / 50
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+line_width = 0.38
+raft_airgap = 0.37
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+raft_surface_line_width = 0.38
+speed_layer_0 = =math.ceil(speed_print * 15 / 35)
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 20 / 35)
+speed_wall_0 = =math.ceil(speed_print * 20 / 35)
+speed_wall_x = =math.ceil(speed_print * 30 / 35)
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.26
+top_bottom_thickness = 1.5
+wall_thickness = 1.14
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
new file mode 100644
index 0000000000..78ffe10ce9
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -2
+material = generic_cpe_plus
+variant = 0.6 mm
+
+[values]
+cool_fan_speed = 45
+cool_fan_speed_min = =cool_fan_speed * 25 / 45
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+line_width = 0.57
+raft_airgap = 0.37
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+raft_interface_line_spacing = 1.4
+raft_interface_line_width = 1.2
+raft_margin = 15
+raft_surface_line_width = 0.57
+raft_surface_thickness = 0.2
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 20 / 25)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 20 / 25)
+speed_wall_x = =speed_print
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_line_distance = 2.85
+support_pattern = lines
+support_xy_distance = 0.6
+support_z_distance = 0.22
+top_bottom_thickness = 0.75
+wall_thickness = 1.14
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..2099ea7cbf
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_cpe_plus
+variant = 0.6 mm
+
+[values]
+cool_fan_speed = 45
+cool_fan_speed_min = =cool_fan_speed * 25 / 45
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+line_width = 0.57
+raft_airgap = 0.37
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+raft_interface_line_spacing = 1.4
+raft_interface_line_width = 1.2
+raft_margin = 15
+raft_surface_line_width = 0.57
+raft_surface_thickness = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 35)
+speed_print = 35
+speed_topbottom = =math.ceil(speed_print * 20 / 35)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 30 / 35)
+speed_wall_x = =speed_print
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_line_distance = 2.85
+support_pattern = lines
+support_xy_distance = 0.6
+support_z_distance = 0.22
+top_bottom_thickness = 0.75
+wall_thickness = 1.14
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
new file mode 100644
index 0000000000..bf4be03a20
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -2
+material = generic_cpe_plus
+variant = 0.8 mm
+
+[values]
+brim_line_count = 10
+cool_fan_speed = 50
+cool_fan_speed_min = =cool_fan_speed * 25 / 50
+cool_min_layer_time = 3
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.37
+raft_base_line_width = 1.6
+raft_interface_line_spacing = 1.8
+raft_interface_line_width = 1.6
+raft_margin = 15
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+speed_layer_0 = =round(speed_print * 30 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 20 / 25)
+speed_wall_0 = =math.ceil(speed_print * 20 / 25)
+speed_wall_x = =speed_print
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.26
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..f1dd92db53
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_cpe_plus
+variant = 0.8 mm
+
+[values]
+brim_line_count = 10
+cool_fan_speed = 50
+cool_fan_speed_min = =cool_fan_speed * 25 / 50
+cool_min_layer_time = 3
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.37
+raft_base_line_width = 1.6
+raft_interface_line_spacing = 1.8
+raft_interface_line_width = 1.6
+raft_margin = 15
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+speed_wall_x = =speed_print
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.26
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
+retraction_combing_max_distance = 50
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_Coarse_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_Coarse_Quality.inst.cfg
new file mode 100644
index 0000000000..e642fb9857
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_Coarse_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.4
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_Draft_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_Draft_Quality.inst.cfg
new file mode 100644
index 0000000000..27801010ca
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_Draft_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_Extra_Coarse_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_Extra_Coarse_Quality.inst.cfg
new file mode 100644
index 0000000000..8db35032aa
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_Extra_Coarse_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Coarse Quality
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extracoarse
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.6
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_Fast_Quality.inst.cfg
new file mode 100644
index 0000000000..39c8927c80
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_Fast_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.15
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_High_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_High_Quality.inst.cfg
new file mode 100644
index 0000000000..3e3ca23ac7
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_High_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+global_quality = True
+
+[values]
+layer_height = 0.06
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_Normal_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..1530bdb200
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_Normal_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_global_Slightly_Coarse_Quality.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_global_Slightly_Coarse_Quality.inst.cfg
new file mode 100644
index 0000000000..e3bac84215
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_global_Slightly_Coarse_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.3
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
new file mode 100644
index 0000000000..2fd638f0e9
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_nylon
+variant = 0.25 mm
+
+[values]
+brim_line_count = 8
+cool_fan_speed = 60
+cool_fan_speed_min = =cool_fan_speed * 35 / 60
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.1
+raft_airgap = 0.15
+raft_base_line_width = 0.5
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.5
+raft_margin = 15
+raft_surface_line_width = 0.2
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 40)
+speed_print = 40
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 40)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 20 / 40)
+speed_wall_x = =speed_print
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_xy_distance = 0.6
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 1
+speed_infill = =math.ceil(speed_print * 40 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
new file mode 100644
index 0000000000..d7a64e12c8
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_nylon
+variant = 0.25 mm
+
+[values]
+brim_line_count = 8
+cool_fan_speed = 60
+cool_fan_speed_min = =cool_fan_speed * 35 / 60
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.1
+raft_airgap = 0.15
+raft_base_line_width = 0.5
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.5
+raft_margin = 15
+raft_surface_line_width = 0.2
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 40)
+speed_print = 40
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 40)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 20 / 40)
+speed_wall_x = =speed_print
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_xy_distance = 0.6
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..d62a4e79ee
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_nylon
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.35
+cool_min_layer_time = 3
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.57
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+raft_surface_line_width = 0.5
+raft_surface_thickness = 0.15
+speed_layer_0 = =math.ceil(speed_print * 30 / 45)
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 20 / 45)
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 40 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_pattern = lines
+support_xy_distance = 0.6
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 0.75
+wall_thickness = 1.06
+speed_wall_0 = =math.ceil(speed_print * 30 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..a6161c2a07
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_nylon
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.35
+cool_min_layer_time = 3
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.57
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+raft_surface_line_width = 0.5
+raft_surface_thickness = 0.15
+speed_layer_0 = =math.ceil(speed_print * 30 / 45)
+speed_print = 45
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 40 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_pattern = lines
+support_xy_distance = 0.6
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 0.75
+wall_thickness = 1.06
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
new file mode 100644
index 0000000000..dbb90918b8
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -1
+material = generic_nylon
+variant = 0.6 mm
+
+[values]
+brim_line_count = 8
+cool_fan_speed_min = =cool_fan_speed * 0.35
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.44
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+raft_interface_line_spacing = 1.4
+raft_interface_line_width = 1.2
+raft_margin = 15
+raft_surface_line_width = 0.6
+raft_surface_thickness = 0.15
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 55)
+speed_print = 55
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 55)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 15 / 55)
+speed_wall_x = =math.ceil(speed_print * 40 / 55)
+support_angle = 45
+support_bottom_distance = 0.55
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_pattern = lines
+support_top_distance = 0.55
+support_xy_distance = 0.7
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
+speed_infill = =math.ceil(speed_print * 55 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..172ef69c01
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_nylon
+variant = 0.6 mm
+
+[values]
+brim_line_count = 8
+cool_fan_speed_min = =cool_fan_speed * 0.35
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.44
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+raft_interface_line_spacing = 1.4
+raft_interface_line_width = 1.2
+raft_margin = 15
+raft_surface_line_width = 0.6
+raft_surface_thickness = 0.15
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 55)
+speed_print = 55
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 55)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 15 / 55)
+speed_wall_x = =math.ceil(speed_print * 40 / 55)
+support_angle = 45
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_pattern = lines
+support_xy_distance = 0.7
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
new file mode 100644
index 0000000000..c85bacb89e
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@@ -0,0 +1,45 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -2
+material = generic_nylon
+variant = 0.8 mm
+
+[values]
+brim_line_count = 8
+cool_fan_speed_min = =cool_fan_speed * 0.35
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.25
+raft_airgap = 0.44
+raft_base_line_width = 1.6
+raft_interface_line_spacing = 1.8
+raft_interface_line_width = 1.6
+raft_margin = 15
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 55)
+speed_print = 55
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 55)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 15 / 55)
+speed_wall_x = =math.ceil(speed_print * 40 / 55)
+support_angle = 45
+support_bottom_distance = 0.65
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_pattern = lines
+support_top_distance = 0.5
+support_xy_distance = 0.75
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 2.4
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..153f206b19
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@@ -0,0 +1,45 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_nylon
+variant = 0.8 mm
+
+[values]
+brim_line_count = 8
+cool_fan_speed_min = =cool_fan_speed * 0.35
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.25
+raft_airgap = 0.44
+raft_base_line_width = 1.6
+raft_interface_line_spacing = 1.8
+raft_interface_line_width = 1.6
+raft_margin = 15
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+retraction_hop_enabled = 0.2
+speed_layer_0 = =round(speed_print * 30 / 55)
+speed_print = 55
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 55)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 15 / 55)
+speed_wall_x = =math.ceil(speed_print * 40 / 55)
+support_angle = 45
+support_bottom_distance = 0.65
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_pattern = lines
+support_top_distance = 0.5
+support_xy_distance = 0.75
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 2.4
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
new file mode 100644
index 0000000000..062e7f97b5
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_pc
+variant = 0.25 mm
+
+[values]
+brim_line_count = 32
+cool_fan_speed = 50
+cool_fan_speed_min = 0
+cool_min_layer_time = 2
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.2
+raft_airgap = 0.25
+raft_base_line_spacing = 1
+raft_base_line_width = 0.5
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.5
+raft_margin = 15
+raft_surface_line_width = 0.2
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.19
+wall_thickness = 0.88
+speed_topbottom = =math.ceil(speed_print * 15 / 30)
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
new file mode 100644
index 0000000000..20ab28f97b
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pc
+variant = 0.25 mm
+
+[values]
+brim_line_count = 32
+cool_fan_speed = 50
+cool_fan_speed_min = 0
+cool_min_layer_time = 2
+cool_min_speed = 15
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.2
+raft_airgap = 0.25
+raft_base_line_spacing = 1
+raft_base_line_width = 0.5
+raft_interface_line_spacing = 0.7
+raft_interface_line_width = 0.5
+raft_margin = 15
+raft_surface_line_width = 0.2
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.19
+wall_thickness = 0.88
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..249bfb9053
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_pc
+variant = 0.4 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = 0
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.3
+raft_airgap = 0.35
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
+speed_wall_0 = =math.ceil(speed_print * 20 / 45)
+speed_wall_x = =math.ceil(speed_print * 30 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.19
+wall_thickness = 1.2
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..86a2dabb6f
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pc
+variant = 0.4 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = 0
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.3
+raft_airgap = 0.35
+raft_base_line_spacing = 1.6
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.8
+raft_margin = 15
+speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
+speed_wall_0 = =math.ceil(speed_print * 20 / 45)
+speed_wall_x = =math.ceil(speed_print * 30 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.19
+wall_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
new file mode 100644
index 0000000000..95bbbff2d3
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@@ -0,0 +1,44 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -1
+material = generic_pc
+variant = 0.6 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = 0
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.52
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+raft_interface_line_spacing = 1.4
+raft_interface_line_width = 1.2
+raft_margin = 15
+raft_surface_line_width = 0.6
+raft_surface_thickness = 0.15
+speed_layer_0 = =math.ceil(speed_print * 30 / 45)
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 20 / 45)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 30 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_line_distance = 3.5333
+support_pattern = lines
+support_z_distance = 0.21
+top_bottom_thickness = 0.75
+wall_thickness = 1.06
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..c4f451d972
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_pc
+variant = 0.6 mm
+
+[values]
+cool_fan_speed = 50
+cool_fan_speed_min = 0
+cool_min_layer_time = 3
+cool_min_speed = 8
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.52
+raft_base_line_spacing = 2.4
+raft_base_line_width = 1.2
+raft_interface_line_spacing = 1.4
+raft_interface_line_width = 1.2
+raft_margin = 15
+raft_surface_line_width = 0.6
+raft_surface_thickness = 0.15
+speed_layer_0 = =math.ceil(speed_print * 30 / 45)
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 20 / 45)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 30 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_line_distance = 3.5333
+support_pattern = lines
+support_z_distance = 0.21
+top_bottom_thickness = 0.75
+wall_thickness = 1.06
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..c9fe800c7b
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pc
+variant = 0.8 mm
+
+[values]
+brim_line_count = 10
+cool_fan_speed = 50
+cool_fan_speed_min = =cool_fan_speed * 25 / 50
+cool_min_layer_time = 3
+infill_overlap = 5
+infill_sparse_density = 20
+layer_0_z_overlap = 0.22
+raft_airgap = 0.47
+raft_base_line_width = 1.6
+raft_interface_line_spacing = 1.8
+raft_interface_line_width = 1.6
+raft_margin = 15
+raft_surface_line_width = 0.7
+raft_surface_thickness = 0.2
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+support_angle = 45
+support_enable = True
+support_infill_rate = =20 if support_enable else 0 if support_tree_enable else 20
+support_pattern = lines
+support_z_distance = 0.26
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg
new file mode 100644
index 0000000000..3c2288f052
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_pla
+variant = 0.25 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
new file mode 100644
index 0000000000..48d37de4c6
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 60)
+speed_print = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 50 / 60)
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..23e1a1396a
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 60)
+speed_print = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 50 / 60)
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
new file mode 100644
index 0000000000..8e8cea39df
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.72
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..68c1a2960e
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..942f69c910
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_pla
+variant = 0.6 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 55)
+speed_print = 55
+speed_topbottom = =math.ceil(speed_print * 20 / 55)
+speed_wall = =math.ceil(speed_print * 40 / 55)
+speed_wall_0 = =math.ceil(speed_print * 25 / 55)
+top_bottom_thickness = 1.2
+wall_thickness = 1.59
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..3bae17f1a7
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_pla
+variant = 0.8 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+speed_wall_0 = =math.ceil(speed_print * 25 / 40)
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..787cf2d779
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@@ -0,0 +1,72 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pp
+variant = 0.4 mm
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+infill_line_width = =round(line_width * 0.4 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+speed_layer_0 = =speed_print
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
+wall_thickness = 0.76
+speed_wall_x = =math.ceil(speed_print * 25 / 25)
+speed_infill = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..48062237b6
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@@ -0,0 +1,70 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pp
+variant = 0.4 mm
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+infill_line_width = =round(line_width * 0.4 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.5
+retraction_prime_speed = 15
+skin_overlap = 10
+speed_layer_0 = =speed_print
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
+wall_thickness = 0.76
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
new file mode 100644
index 0000000000..86cecc00f0
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@@ -0,0 +1,71 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pp
+variant = 0.6 mm
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+infill_line_width = =round(line_width * 0.6 / 0.57, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.6
+speed_layer_0 = =speed_print
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
+wall_thickness = 1.14
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
new file mode 100644
index 0000000000..6e21a94da9
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@@ -0,0 +1,73 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pp
+variant = 0.6 mm
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+infill_line_width = =round(line_width * 0.6 / 0.57, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.6
+speed_layer_0 = =speed_print
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.1
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
+wall_thickness = 1.14
+speed_wall_x = =math.ceil(speed_print * 25 / 25)
+speed_infill = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
new file mode 100644
index 0000000000..d93d807812
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
@@ -0,0 +1,71 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pp
+variant = 0.8 mm
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+infill_line_width = =round(line_width * 0.8 / 0.76, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.8
+speed_layer_0 = =speed_print
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.5
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
+wall_thickness = 1.52
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
new file mode 100644
index 0000000000..bd28518e4a
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
@@ -0,0 +1,71 @@
+[general]
+version = 4
+name = Extra Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = slightlycoarse
+weight = -3
+material = generic_pp
+variant = 0.8 mm
+
+[values]
+acceleration_enabled = True
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 20
+infill_line_width = =round(line_width * 0.8 / 0.76, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
+jerk_wall = =math.ceil(jerk_print * 10 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
+line_width = =machine_nozzle_size * 0.95
+multiple_mesh_overlap = 0
+retraction_count_max = 12
+retraction_extrusion_window = 1
+retraction_hop = 0.15
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_prime_speed = 15
+skin_overlap = 10
+skirt_brim_line_width = 0.8
+speed_layer_0 = =speed_print
+speed_prime_tower = =speed_topbottom
+speed_print = 25
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 250
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.5
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
+wall_thickness = 1.52
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg
new file mode 100644
index 0000000000..8d1a329422
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_tough_pla
+variant = 0.25 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
new file mode 100644
index 0000000000..06474184be
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_tough_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 40 / 50)
+top_bottom_thickness = 0.75
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
new file mode 100644
index 0000000000..d25748e82f
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_tough_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 30 / 40)
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 30 / 40)
+top_bottom_thickness = 0.75
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..7660043d51
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tough_pla
+variant = 0.4 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 20 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
new file mode 100644
index 0000000000..0371972d42
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_tough_pla
+variant = 0.6 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_print * 30 / 50)
+top_bottom_thickness = 1.2
+wall_thickness = 1.59
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg
new file mode 100644
index 0000000000..8fd4c747c4
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_tough_pla
+variant = 0.8 mm
+
+[values]
+cool_min_layer_time = 5
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
+speed_wall_0 = =math.ceil(speed_print * 25 / 40)
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
new file mode 100644
index 0000000000..f03f8ca03d
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_tpu
+variant = 0.25 mm
+
+[values]
+adhesion_type = brim
+brim_line_count = 20
+cool_fan_speed = 60
+cool_fan_speed_min = =cool_fan_speed * 35 / 60
+cool_min_layer_time = 7
+cool_min_speed = 15
+infill_sparse_density = 10
+layer_0_z_overlap = 0.1
+raft_airgap = 0.2
+raft_base_line_spacing = 1
+raft_interface_line_spacing = 1
+raft_interface_line_width = 0.2
+raft_surface_line_width = 0.2
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 40)
+speed_print = 40
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 40)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 15 / 40)
+speed_wall_x = =math.ceil(speed_print * 38 / 40)
+support_angle = 45
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_xy_distance = 0.6
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 0.88
+speed_infill = =math.ceil(speed_print * 40 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
new file mode 100644
index 0000000000..40e8daa71f
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tpu
+variant = 0.4 mm
+
+[values]
+adhesion_type = brim
+brim_line_count = 20
+cool_fan_speed = 60
+cool_fan_speed_min = =cool_fan_speed * 35 / 60
+cool_min_layer_time = 10
+cool_min_speed = 15
+infill_sparse_density = 10
+raft_base_line_spacing = 2
+raft_base_line_width = 0.8
+raft_interface_line_spacing = 1
+raft_margin = 12
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 40)
+speed_print = 40
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 40)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 20 / 40)
+speed_wall_x = =math.ceil(speed_print * 35 / 40)
+support_angle = 45
+support_enable = True
+support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
+support_xy_distance = 0.65
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 1.05
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
new file mode 100644
index 0000000000..35ce420405
--- /dev/null
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@@ -0,0 +1,45 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_tpu
+variant = 0.6 mm
+
+[values]
+adhesion_type = brim
+brim_line_count = 20
+cool_fan_speed = 60
+cool_fan_speed_min = =cool_fan_speed * 35 / 60
+cool_min_speed = 15
+infill_sparse_density = 10
+layer_0_z_overlap = 0.12
+line_width = 0.57
+raft_airgap = 0.24
+raft_base_line_spacing = 1.2
+raft_base_line_width = 0.6
+raft_interface_line_spacing = 1.2
+raft_interface_line_width = 0.57
+raft_margin = 15
+raft_surface_line_width = 0.5
+retraction_hop_enabled = 0.2
+speed_layer_0 = =math.ceil(speed_print * 30 / 45)
+speed_print = 45
+speed_support = 40
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_travel = 150
+speed_wall_0 = =math.ceil(speed_print * 15 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+support_angle = 45
+support_enable = True
+support_infill_rate = =0 if support_structure == 'tree' else 25
+support_xy_distance = 0.7
+support_z_distance = =layer_height * 2
+top_bottom_thickness = 1.2
+wall_thickness = 1.14
+speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/variants/ultimaker2_plus_connect_0.25.inst.cfg b/resources/variants/ultimaker2_plus_connect_0.25.inst.cfg
new file mode 100644
index 0000000000..c148d31829
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_connect_0.25.inst.cfg
@@ -0,0 +1,19 @@
+[general]
+name = 0.25 mm
+version = 4
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+coasting_min_volume = 0.17
+coasting_volume = 0.1
+machine_nozzle_size = 0.25
+machine_nozzle_tip_outer_diameter = 0.8
+raft_airgap = 0.25
+speed_topbottom = =round(speed_print / 1.5, 1)
+speed_wall = =round(speed_print / 1.2, 1)
+speed_wall_0 = =1 if speed_wall < 5 else (speed_wall - 5)
diff --git a/resources/variants/ultimaker2_plus_connect_0.4.inst.cfg b/resources/variants/ultimaker2_plus_connect_0.4.inst.cfg
new file mode 100644
index 0000000000..5dfc4caca2
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_connect_0.4.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+name = 0.4 mm
+version = 4
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4
+machine_nozzle_tip_outer_diameter = 1.05
+speed_wall = =round(speed_print / 1.25, 1)
+speed_wall_0 = =max(speed_wall - 10, 1)
+speed_topbottom = =round(speed_print / 2.25, 1)
diff --git a/resources/variants/ultimaker2_plus_connect_0.6.inst.cfg b/resources/variants/ultimaker2_plus_connect_0.6.inst.cfg
new file mode 100644
index 0000000000..9c1ea96cb2
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_connect_0.6.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+name = 0.6 mm
+version = 4
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.25
+coasting_volume = 1.36
+speed_wall = =round(speed_print * 3 / 4, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2, 1)
diff --git a/resources/variants/ultimaker2_plus_connect_0.8.inst.cfg b/resources/variants/ultimaker2_plus_connect_0.8.inst.cfg
new file mode 100644
index 0000000000..8cea0a22b4
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_connect_0.8.inst.cfg
@@ -0,0 +1,17 @@
+[general]
+name = 0.8 mm
+version = 4
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8
+machine_nozzle_tip_outer_diameter = 1.35
+coasting_volume = 3.22
+speed_wall = =round(speed_print * 3 / 4, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2, 1)