Update translation templates for Cura 4.6

These are the new translations for the next release of Cura. I generated them from my computer at home now, so all of the paths have changed... But they are just indications anyway.

3 files changed, 3380 insertions, 3332 deletions

diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot
index 5c8f1e240f..cdaea1a564 100644
--- a/resources/i18n/cura.pot
+++ b/resources/i18n/cura.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-02-07 14:19+0100\n"
+"POT-Creation-Date: 2020-04-06 16:33+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,770 +18,892 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
 
-#: /home/ruben/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1490
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:229
+msgctxt "@label"
+msgid "Unknown"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid ""
+"The printer(s) below cannot be connected because they are part of a group"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
+msgctxt "@label"
+msgid "Available networked printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
+msgctxt "@menuitem"
+msgid "Not overridden"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
+msgctxt "@label"
+msgid "Default"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
-msgctxt "@action"
-msgid "Machine Settings"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid ""
+"The visual profile is designed to print visual prototypes and models with "
+"the intent of high visual and surface quality."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid ""
+"The engineering profile is designed to print functional prototypes and end-"
+"use parts with the intent of better accuracy and for closer tolerances."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid ""
+"The draft profile is designed to print initial prototypes and concept "
+"validation with the intent of significant print time reduction."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
-msgctxt "@info:title"
-msgid "Saving"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
+msgctxt "@label"
+msgid "Custom Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+msgctxt "@label"
+msgid "Custom"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
+msgctxt "@label"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
+msgctxt "@item:inlistbox"
+msgid "All Supported Types ({0})"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1697
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:81
 msgctxt "@info:title"
-msgid "Error"
+msgid "Login failed"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
 msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
+msgid "Finding new location for objects"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
 msgctxt "@info:title"
-msgid "File Saved"
+msgid "Finding Location"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
-msgctxt "@action:button"
-msgid "Eject"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
+msgctxt "@info:title"
+msgid "Can't Find Location"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1687
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1787
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:99
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Warning"
+msgid "Backup"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:114
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-msgctxt "@info:title"
-msgid "Safely Remove Hardware"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:125
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:95
 msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
+msgid ""
+"The build volume height has been reduced due to the value of the \"Print "
+"Sequence\" setting to prevent the gantry from colliding with printed models."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:72
-msgctxt "@item:intext"
-msgid "Removable Drive"
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:97
+msgctxt "@info:title"
+msgid "Build Volume"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:93
-msgctxt "@info:generic"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
 msgid ""
-"\n"
-"Do you want to sync material and software packages with your account?"
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
+"</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start "
+"up. It was possibly caused by some incorrect configuration files. We suggest "
+"to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</"
+"p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</"
+"p>\n"
+"                "
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:94
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:90
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:96
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
-msgid "Sync"
+msgid "Show detailed crash report"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+msgctxt "@action:button"
+msgid "Show configuration folder"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:169
 msgctxt "@title:window"
-msgid "Plugin License Agreement"
+msgid "Crash Report"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:30
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:188
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
+"to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report "
+"automatically to our servers</p>\n"
+"        "
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:196
+msgctxt "@title:groupbox"
+msgid "System information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:86
-msgctxt "@info:generic"
-msgid ""
-"\n"
-"Syncing..."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:205
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:216
+msgctxt "@label Cura version number"
+msgid "Cura version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:217
+msgctxt "@label"
+msgid "Cura language"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:218
+msgctxt "@label"
+msgid "OS language"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
-msgctxt "@action"
-msgid "Level build plate"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:219
+msgctxt "@label Type of platform"
+msgid "Platform"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
-msgctxt "@action"
-msgid "Select upgrades"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:220
+msgctxt "@label"
+msgid "Qt version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:221
+msgctxt "@label"
+msgid "PyQt version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:222
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:247
+msgctxt "@label"
+msgid "Not yet initialized<br/>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:250
+#, python-brace-format
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
-msgctxt "@label"
-msgid ""
-"A USB print is in progress, closing Cura will stop this print. Are you sure?"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:251
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
-msgctxt "@message"
-msgid ""
-"A print is still in progress. Cura cannot start another print via USB until "
-"the previous print has completed."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:252
+#, python-brace-format
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
-msgctxt "@message"
-msgid "Print in Progress"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:286
+msgctxt "@title:groupbox"
+msgid "Error traceback"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:372
+msgctxt "@title:groupbox"
+msgid "Logs"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:400
+msgctxt "@action:button"
+msgid "Send report"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:495
+msgctxt "@info:progress"
+msgid "Loading machines..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@properties:tooltip"
-msgid "Print over network"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:502
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@info:status"
-msgid "Connected over the network"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:630
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Cura has detected material profiles that were not yet installed on the host "
-"printer of group {0}."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:757
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:771
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
-msgctxt "@info:status"
-msgid "Sending Print Job"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:833
+msgctxt "@info:progress"
+msgid "Setting up scene..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:868
+msgctxt "@info:progress"
+msgid "Loading interface..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:873
+msgctxt "@info:progress"
+msgid "Initializing engine..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1166
+#, python-format
+msgctxt ""
+"@info 'width', 'depth' and 'height' are variable names that must NOT be "
+"translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1676
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1677
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
-msgid "Data Sent"
+msgid "Warning"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1686
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1687
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
+msgctxt "@info:title"
+msgid "Error"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1776
+msgctxt "@info:status"
+msgid "The selected model was too small to load."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:29
 msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
+msgid "Multiplying and placing objects"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
 msgctxt "@info:title"
-msgid "Print error"
+msgid "Placing Objects"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid ""
-"You are attempting to connect to a printer that is not running Ultimaker "
-"Connect. Please update the printer to the latest firmware."
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
+msgctxt "@info:title"
+msgid "Placing Object"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
+msgctxt "@message"
+msgid "Could not read response."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"You are attempting to connect to {0} but it is not the host of a group. You "
-"can visit the web page to configure it as a group host."
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
+msgctxt "@message"
+msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
-msgctxt "@action"
-msgid "Configure group"
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
-msgctxt "@action"
-msgid "Connect via Network"
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:138
-msgctxt "@action:button"
-msgid "Print via Cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:196
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
+msgctxt "@title:window"
+msgid "File Already Exists"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
-msgctxt "@properties:tooltip"
-msgid "Print via Cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:197
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid ""
+"The file <filename>{0}</filename> already exists. Are you sure you want to "
+"overwrite it?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:432
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:435
 msgctxt "@info:status"
-msgid "Connected via Cloud"
+msgid "Invalid file URL:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/ruben/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:646
-msgctxt "@label"
-msgid "Nozzle"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid ""
+"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
+"failure."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
 #, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> contains an unknown machine type "
-"<message>{1}</message>. Cannot import the machine. Models will be imported "
-"instead."
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
 msgctxt "@info:title"
-msgid "Open Project File"
+msgid "Export succeeded"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
-msgctxt "@title:tab"
-msgid "Recommended"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
-msgctxt "@title:tab"
-msgid "Custom"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid ""
+"Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid ""
+"This profile <filename>{0}</filename> contains incorrect data, could not "
+"import it."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
+msgctxt "@label"
+msgid "Custom profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:338
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
 msgctxt "@info:status"
-msgid "Parsing G-code"
+msgid "Profile is missing a quality type."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:340
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:494
-msgctxt "@info:title"
-msgid "G-code Details"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not find a quality type {0} for the current configuration."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeReader/FlavorParser.py:492
-msgctxt "@info:generic"
-msgid ""
-"Make sure the g-code is suitable for your printer and printer configuration "
-"before sending the file to it. The g-code representation may not be accurate."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:659
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
+msgctxt "@label"
+msgid "Nozzle"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:331
-msgctxt "@info:status"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:796
+msgctxt "@info:message Followed by a list of settings."
 msgid ""
-"Unable to slice with the current material as it is incompatible with the "
-"selected machine or configuration."
+"Settings have been changed to match the current availability of extruders:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:331
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:362
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:404
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:798
 msgctxt "@info:title"
-msgid "Unable to slice"
+msgid "Settings updated"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:361
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice with the current settings. The following settings have "
-"errors: {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1367
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+msgctxt "@action:button"
+msgid "Add"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:385
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:62
 #, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice due to some per-model settings. The following settings have "
-"errors on one or more models: {error_labels}"
+msgctxt "@label"
+msgid "Group #{group_nr}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:394
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because the prime tower or prime position(s) are invalid."
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:81
+msgctxt "@tooltip"
+msgid "Outer Wall"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:403
-#, python-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because there are objects associated with disabled Extruder "
-"%s."
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:82
+msgctxt "@tooltip"
+msgid "Inner Walls"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
-msgctxt "@info:status"
-msgid ""
-"Nothing to slice because none of the models fit the build volume or are "
-"assigned to a disabled extruder. Please scale or rotate models to fit, or "
-"enable an extruder."
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+msgctxt "@tooltip"
+msgid "Skin"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
-msgctxt "@info:status"
-msgid "Processing Layers"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+msgctxt "@tooltip"
+msgid "Infill"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
-msgctxt "@info:title"
-msgid "Information"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Support Infill"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Support Interface"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/ruben/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Support"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
-msgctxt "@action"
-msgid "Update Firmware"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Skirt"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Prime Tower"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Travel"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Retractions"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Other"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+msgctxt "@action:button"
+msgid "Next"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+msgctxt "@action:button"
+msgid "Close"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:94
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and "
+"material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</"
+"p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
+"guide</a></p>"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Project file <filename>{0}</filename> contains an unknown machine type "
+"<message>{1}</message>. Cannot import the machine. Models will be imported "
+"instead."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
+msgctxt "@title:tab"
+msgid "Recommended"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
+msgid "3MF File"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:180
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
-msgid "Error writing 3mf file."
+msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
-#: /home/ruben/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:181
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:55
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
 msgctxt "@info:title"
-msgid "Backup"
+msgid "Backups"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:55
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
 msgctxt "@info:backup_status"
-msgid "There was an error listing your backups."
+msgid "There was an error while uploading your backup."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:132
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
 msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
+msgid "Creating your backup..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:15
-msgctxt "@info:title"
-msgid "Backups"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
 msgctxt "@info:backup_status"
 msgid "Uploading your backup..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
 msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
+msgid "Your backup has finished uploading."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/UploadBackupJob.py:39
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
 msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
+msgid "There was an error trying to restore your backup."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13
-msgctxt "@item:inlistbox"
-msgid "X3D File"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:119
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
 msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgid ""
+"Unable to slice with the current material as it is incompatible with the "
+"selected machine or configuration."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:120
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:374
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:398
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:407
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:416
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
 msgctxt "@info:title"
-msgid "Simulation View"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:373
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+msgid ""
+"Unable to slice with the current settings. The following settings have "
+"errors: {0}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:title"
-msgid "No layers to show"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:397
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Unable to slice due to some per-model settings. The following settings have "
+"errors on one or more models: {error_labels}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:406
+msgctxt "@info:status"
+msgid ""
+"Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:415
+#, python-format
+msgctxt "@info:status"
+msgid ""
+"Unable to slice because there are objects associated with disabled Extruder "
+"%s."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:424
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.py:92
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and "
-"material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</"
-"p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
-"guide</a></p>"
+msgid "Processing Layers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
+msgctxt "@info:title"
+msgid "Information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:125
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:126
 msgctxt "@info"
 msgid "Could not access update information."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
 #, python-brace-format
 msgctxt ""
 "@info Don't translate {machine_name}, since it gets replaced by a printer "
@@ -791,2618 +913,2780 @@ msgid ""
 "update the firmware on your printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
 #, python-format
 msgctxt "@info:title The %s gets replaced with the printer name."
 msgid "New %s firmware available"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
 msgctxt "@action:button"
 msgid "How to update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/API/Account.py:82
-msgctxt "@info:title"
-msgid "Login failed"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
+msgctxt "@action"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:95
-msgctxt "@info:status"
-msgid ""
-"The build volume height has been reduced due to the value of the \"Print "
-"Sequence\" setting to prevent the gantry from colliding with printed models."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/BuildVolume.py:97
-msgctxt "@info:title"
-msgid "Build Volume"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:510
-msgctxt "@info:progress"
-msgid "Loading machines..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:517
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:341
+msgctxt "@info:status"
+msgid "Parsing G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:645
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:343
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:497
+msgctxt "@info:title"
+msgid "G-code Details"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:767
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:495
+msgctxt "@info:generic"
+msgid ""
+"Make sure the g-code is suitable for your printer and printer configuration "
+"before sending the file to it. The g-code representation may not be accurate."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:781
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:843
-msgctxt "@info:progress"
-msgid "Setting up scene..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:878
-msgctxt "@info:progress"
-msgid "Loading interface..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:883
-msgctxt "@info:progress"
-msgid "Initializing engine..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1176
-#, python-format
-msgctxt ""
-"@info 'width', 'depth' and 'height' are variable names that must NOT be "
-"translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1686
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1696
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CuraApplication.py:1786
-msgctxt "@info:status"
-msgid "The selected model was too small to load."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:99
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:114
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
+msgctxt "@action"
+msgid "Machine Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Backups/Backup.py:125
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/ObjectsModel.py:62
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
 msgctxt "@label"
-msgid "Group #{group_nr}"
+msgid "Per Model Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-msgctxt "@action:button"
-msgid "Add"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
-msgctxt "@action:button"
-msgid "Cancel"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Post Processing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:124
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-msgctxt "@action:button"
-msgid "Close"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:37
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:81
-msgctxt "@tooltip"
-msgid "Outer Wall"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:82
-msgctxt "@tooltip"
-msgid "Inner Walls"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:83
-msgctxt "@tooltip"
-msgid "Skin"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Save to Removable Drive"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:84
-msgctxt "@tooltip"
-msgid "Infill"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Support Infill"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
+msgctxt "@info:status"
+msgid "There are no file formats available to write with!"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Support Interface"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Support"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
+msgctxt "@info:title"
+msgid "Saving"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Skirt"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Prime Tower"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Travel"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Retractions"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Other"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
+msgctxt "@info:title"
+msgid "File Saved"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
 msgctxt "@action:button"
-msgid "Next"
+msgid "Eject"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
+#, python-brace-format
+msgctxt "@action"
+msgid "Eject removable device {0}"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:29
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Multiplying and placing objects"
+msgid "Ejected {0}. You can now safely remove the drive."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
 msgctxt "@info:title"
-msgid "Placing Objects"
+msgid "Safely Remove Hardware"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:108
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
+msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:108
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:75
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:119
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:120
 msgctxt "@info:title"
-msgid "Placing Object"
+msgid "Simulation View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
-msgctxt "@label"
-msgid "Default"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
-msgctxt "@label"
-msgid "Visual"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
+msgctxt "@info:title"
+msgid "No layers to show"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-msgctxt "@text"
-msgid ""
-"The visual profile is designed to print visual prototypes and models with "
-"the intent of high visual and surface quality."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
-msgctxt "@label"
-msgid "Engineering"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-msgctxt "@text"
-msgid ""
-"The engineering profile is designed to print functional prototypes and end-"
-"use parts with the intent of better accuracy and for closer tolerances."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Draft"
+msgid "Support Blocker"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-msgctxt "@text"
-msgid ""
-"The draft profile is designed to print initial prototypes and concept "
-"validation with the intent of significant print time reduction."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
-#: /home/ruben/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1474
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:184
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:225
-msgctxt "@label"
-msgid "Unknown"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:101
+msgctxt "@info:generic"
+msgid "Do you want to sync material and software packages with your account?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid ""
-"The printer(s) below cannot be connected because they are part of a group"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
-msgctxt "@label"
-msgid "Available networked printers"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:105
+msgctxt "@action:button"
+msgid "Sync"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
-msgctxt "@menuitem"
-msgid "Not overridden"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:87
+msgctxt "@info:generic"
+msgid "Syncing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
-msgctxt "@label"
-msgid "Custom Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+msgctxt "@button"
+msgid "Decline"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
-msgctxt "@label"
-msgid "Custom"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+msgctxt "@button"
+msgid "Agree"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
-msgctxt "@label"
-msgid "Custom profiles"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+msgctxt "@title:window"
+msgid "Plugin License Agreement"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
-#, python-brace-format
-msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+msgctxt "@button"
+msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
-msgctxt "@item:inlistbox"
-msgid "All Files (*)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
+msgctxt "@info:generic"
+msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:90
-msgctxt "@title:window"
-msgid "Cura can't start"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:96
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
-"</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start "
-"up. It was possibly caused by some incorrect configuration files. We suggest "
-"to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</"
-"p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</"
-"p>\n"
-"                "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:105
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:108
-msgctxt "@action:button"
-msgid "Show detailed crash report"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:112
-msgctxt "@action:button"
-msgid "Show configuration folder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:123
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:152
-msgctxt "@title:window"
-msgid "Crash Report"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:172
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
-"to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report "
-"automatically to our servers</p>\n"
-"        "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:180
-msgctxt "@title:groupbox"
-msgid "System information"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
+msgctxt "@action"
+msgid "Level build plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:189
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
+msgctxt "@action"
+msgid "Select upgrades"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:200
-msgctxt "@label Cura version number"
-msgid "Cura version"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
+msgctxt "@action:button"
+msgid "Print via Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:201
-msgctxt "@label"
-msgid "Cura language"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
+msgctxt "@properties:tooltip"
+msgid "Print via Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:202
-msgctxt "@label"
-msgid "OS language"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:141
+msgctxt "@info:status"
+msgid "Connected via Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:203
-msgctxt "@label Type of platform"
-msgid "Platform"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:204
-msgctxt "@label"
-msgid "Qt version"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Cloud"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:205
-msgctxt "@label"
-msgid "PyQt version"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:206
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid ""
+"You are attempting to connect to a printer that is not running Ultimaker "
+"Connect. Please update the printer to the latest firmware."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:231
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:234
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
+msgctxt "@info:status"
+msgid ""
+"Cura has detected material profiles that were not yet installed on the host "
+"printer of group {0}."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:235
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:236
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgctxt "@info:status"
+msgid ""
+"You are attempting to connect to {0} but it is not the host of a group. You "
+"can visit the web page to configure it as a group host."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:270
-msgctxt "@title:groupbox"
-msgid "Error traceback"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+msgctxt "@info:title"
+msgid "Not a group host"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:356
-msgctxt "@title:groupbox"
-msgid "Logs"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+msgctxt "@action"
+msgid "Configure group"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:379
-msgctxt "@title:groupbox"
-msgid ""
-"User description (Note: Developers may not speak your language, please use "
-"English if possible)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/CrashHandler.py:399
-msgctxt "@action:button"
-msgid "Send report"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:196
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
-msgctxt "@title:window"
-msgid "File Already Exists"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:197
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
-#, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid ""
-"The file <filename>{0}</filename> already exists. Are you sure you want to "
-"overwrite it?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:430
-#: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:433
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
 msgctxt "@info:status"
-msgid "Invalid file URL:"
+msgid "Sending Print Job"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+msgctxt "@info:status"
+msgid "Print job was successfully sent to the printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+msgctxt "@info:title"
+msgid "Data Sent"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid ""
-"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
-"failure."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@properties:tooltip"
+msgid "Print over network"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
-msgctxt "@info:title"
-msgid "Export succeeded"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+msgctxt "@info:status"
+msgid "Connected over the network"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
+msgctxt "@action"
+msgid "Connect via Network"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid ""
-"Can't import profile from <filename>{0}</filename> before a printer is added."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
+msgctxt "@info:status"
+msgid "tomorrow"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid ""
-"This profile <filename>{0}</filename> contains incorrect data, could not "
-"import it."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
 msgctxt "@info:status"
-msgid "Successfully imported profile {0}"
+msgid "Connected via USB"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
-#, python-brace-format
-msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
+msgctxt "@label"
+msgid ""
+"A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+msgctxt "@message"
+msgid ""
+"A print is still in progress. Cura cannot start another print via USB until "
+"the previous print has completed."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
-msgctxt "@label"
-msgid "Custom profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
+msgctxt "@message"
+msgid "Print in Progress"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
-msgctxt "@info:status"
-msgid "Profile is missing a quality type."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Could not find a quality type {0} for the current configuration."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:780
-msgctxt "@info:message Followed by a list of settings."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
 msgid ""
-"Settings have been changed to match the current availability of extruders:"
+"Some things could be problematic in this print. Click to see tips for "
+"adjustment."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:782
-msgctxt "@info:title"
-msgid "Settings updated"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
+msgctxt "@title:window"
+msgid "Open Project"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Settings/MachineManager.py:1351
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
-msgctxt "@info:status"
-msgid "Finding new location for objects"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
-msgctxt "@info:title"
-msgid "Finding Location"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
-#: /home/ruben/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-msgctxt "@info:title"
-msgid "Can't Find Location"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
+msgctxt "@action:label"
+msgid "Printer settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
-msgctxt "@message"
-msgid "The provided state is not correct."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
+msgctxt "@action:ComboBox option"
+msgid "Update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
+msgctxt "@action:ComboBox option"
+msgid "Create new"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
+msgctxt "@action:label"
+msgid "Type"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
-msgctxt "@message"
-msgid "Could not read response."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+msgctxt "@action:label"
+msgid "Printer Group"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
+msgctxt "@action:label"
+msgid "Profile settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
+msgctxt "@action:label"
+msgid "Name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
+msgctxt "@action:label"
+msgid "Intent"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
+msgctxt "@action:label"
+msgid "Not in profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
+msgctxt "@action:label"
+msgid "Derivative from"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
+msgctxt "@action:label"
+msgid "Material settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:293
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-msgctxt "@label"
-msgid "Pause"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
+msgctxt "@action:label"
+msgid "Setting visibility"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:289
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-msgctxt "@label"
-msgid "Resume"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
+msgctxt "@action:label"
+msgid "Mode"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:325
-msgctxt "@label"
-msgid "Abort Print"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
+msgctxt "@action:label"
+msgid "Visible settings:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:335
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-msgctxt "@window:title"
-msgid "Abort print"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
+msgctxt "@action:label"
+msgid "%1 out of %2"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MonitorButton.qml:337
-msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
-msgctxt "@label"
-msgid "Extruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
+msgctxt "@action:button"
+msgid "Open"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
-msgctxt "@tooltip"
-msgid ""
-"The target temperature of the hotend. The hotend will heat up or cool down "
-"towards this temperature. If this is 0, the hotend heating is turned off."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Pre-heat"
+msgid "Restore"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
-msgctxt "@tooltip of pre-heat"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
 msgid ""
-"Heat the hotend in advance before printing. You can continue adjusting your "
-"print while it is heating, and you won't have to wait for the hotend to heat "
-"up when you're ready to print."
+"You will need to restart Cura before your backup is restored. Do you want to "
+"close Cura now?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
-msgctxt "@tooltip"
-msgid "The material in this extruder."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
-msgctxt "@info:status"
-msgid "The printer is not connected."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
-msgctxt "@label"
-msgid "Build plate"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
-msgctxt "@tooltip"
-msgid ""
-"The target temperature of the heated bed. The bed will heat up or cool down "
-"towards this temperature. If this is 0, the bed heating is turned off."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid ""
+"You don't have any backups currently. Use the 'Backup Now' button to create "
+"one."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
-msgctxt "@tooltip of pre-heat"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
 msgid ""
-"Heat the bed in advance before printing. You can continue adjusting your "
-"print while it is heating, and you won't have to wait for the bed to heat up "
-"when you're ready to print."
+"During the preview phase, you'll be limited to 5 visible backups. Remove a "
+"backup to see older ones."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
-msgctxt "@label"
-msgid "Printer control"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
-msgctxt "@label"
-msgid "Jog Position"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
+msgctxt "@button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
-msgctxt "@label"
-msgid "X/Y"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+msgctxt "@title"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
-msgid "Z"
+msgid ""
+"Firmware is the piece of software running directly on your 3D printer. This "
+"firmware controls the step motors, regulates the temperature and ultimately "
+"makes your printer work."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
-msgid "Jog Distance"
+msgid ""
+"The firmware shipping with new printers works, but new versions tend to have "
+"more features and improvements."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
-msgctxt "@label"
-msgid "Send G-code"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+msgctxt "@action:button"
+msgid "Automatically upgrade Firmware"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
-msgctxt "@tooltip of G-code command input"
-msgid ""
-"Send a custom G-code command to the connected printer. Press 'enter' to send "
-"the command."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+msgctxt "@action:button"
+msgid "Upload custom Firmware"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
-msgid "This package will be installed after restarting."
+msgid ""
+"Firmware can not be updated because there is no connection with the printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:435
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+msgctxt "@label"
+msgid ""
+"Firmware can not be updated because the connection with the printer does not "
+"support upgrading firmware."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:438
-msgctxt "@title:tab"
-msgid "Settings"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+msgctxt "@title:window"
+msgid "Select custom firmware"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:440
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+msgctxt "@title:window"
+msgid "Firmware Update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:442
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
-msgctxt "@title:tab"
-msgid "Materials"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+msgctxt "@label"
+msgid "Updating firmware."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:444
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+msgctxt "@label"
+msgid "Firmware update completed."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:563
-msgctxt "@title:window"
-msgid "Closing Cura"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+msgctxt "@label"
+msgid "Firmware update failed due to an unknown error."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:564
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:576
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
-msgid "Are you sure you want to exit Cura?"
+msgid "Firmware update failed due to an communication error."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:614
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-msgctxt "@title:window"
-msgid "Open file(s)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+msgctxt "@label"
+msgid "Firmware update failed due to an input/output error."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:720
-msgctxt "@window:title"
-msgid "Install Package"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+msgctxt "@label"
+msgid "Firmware update failed due to missing firmware."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:728
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
 msgctxt "@title:window"
-msgid "Open File(s)"
+msgid "Convert Image..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:731
-msgctxt "@text:window"
-msgid ""
-"We have found one or more G-Code files within the files you have selected. "
-"You can only open one G-Code file at a time. If you want to open a G-Code "
-"file, please just select only one."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:834
-msgctxt "@title:window"
-msgid "Add Printer"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Cura.qml:842
-msgctxt "@title:window"
-msgid "What's New"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid ""
+"For lithophanes dark pixels should correspond to thicker locations in order "
+"to block more light coming through. For height maps lighter pixels signify "
+"higher terrain, so lighter pixels should correspond to thicker locations in "
+"the generated 3D model."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Slice"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid ""
+"For lithophanes a simple logarithmic model for translucency is available. "
+"For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid ""
+"The percentage of light penetrating a print with a thickness of 1 "
+"millimeter. Lowering this value increases the contrast in dark regions and "
+"decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+msgctxt "@action:button"
+msgid "OK"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] ""
-msgstr[1] ""
+msgid "Nozzle size"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Number of Copies"
+msgid "mm"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
+msgctxt "@title:label"
+msgid "Extruder End G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+msgctxt "@label"
+msgid "X (Width)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
 msgctxt "@label"
-msgid "Printer"
+msgid "Z (Height)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Enabled"
+msgid "Build plate shape"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material"
+msgid "Origin at center"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
+msgid "Heated bed"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
+msgid "Heated build volume"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
 msgctxt "@label"
-msgid ""
-"The configurations are not available because the printer is disconnected."
+msgid "G-code flavor"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
 msgctxt "@label"
-msgid "Select configuration"
+msgid "X min"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
 msgctxt "@label"
-msgid "Configurations"
+msgid "Y min"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid ""
-"This configuration is not available because %1 is not recognized. Please "
-"visit %2 to download the correct material profile."
+msgid "X max"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:129
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
 msgctxt "@label"
-msgid "Marketplace"
+msgid "Y max"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
-msgctxt "@title:menu"
-msgid "&Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:339
+msgctxt "@label"
+msgid "Shared Heater"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:365
+msgctxt "@title:label"
+msgid "Start G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:376
+msgctxt "@title:label"
+msgid "End G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+msgctxt "@label"
+msgid "Mesh Type"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:75
+msgctxt "@label"
+msgid "Normal model"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
+msgctxt "@label"
+msgid "Print as support"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
+msgctxt "@label"
+msgid "Modify settings for overlaps"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+msgctxt "@label"
+msgid "Don't support overlaps"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:142
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:143
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:373
+msgctxt "@action:button"
+msgid "Select settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
-msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
-msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
+msgctxt "@label:checkbox"
+msgid "Show all"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+msgctxt "@label"
+msgid "Post Processing Scripts"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+msgctxt "@label"
+msgid "Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+msgctxt "@label"
+msgid "Color scheme"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-msgctxt "@label:textbox"
-msgid "Filter..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
+msgctxt "@label:listbox"
+msgid "Material Color"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
+msgctxt "@label:listbox"
+msgid "Line Type"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
+msgctxt "@label:listbox"
+msgid "Speed"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid ""
-"The new filament diameter is set to %1 mm, which is not compatible with the "
-"current extruder. Do you wish to continue?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
+msgctxt "@label:listbox"
+msgid "Layer thickness"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
 msgctxt "@label"
-msgid "Display Name"
+msgid "Compatibility Mode"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
 msgctxt "@label"
-msgid "Brand"
+msgid "Travels"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
 msgctxt "@label"
-msgid "Material Type"
+msgid "Helpers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
 msgctxt "@label"
-msgid "Color"
+msgid "Shell"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
-msgid "Properties"
+msgid "Infill"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
 msgctxt "@label"
-msgid "Density"
+msgid "Only Show Top Layers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
 msgctxt "@label"
-msgid "Diameter"
+msgid "Show 5 Detailed Layers On Top"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
 msgctxt "@label"
-msgid "Filament Cost"
+msgid "Top / Bottom"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
 msgctxt "@label"
-msgid "Filament weight"
+msgid "Inner Wall"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
 msgctxt "@label"
-msgid "Filament length"
+msgid "min"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
 msgctxt "@label"
-msgid "Cost per Meter"
+msgid "max"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
-msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid ""
+"Ultimaker Cura collects anonymous data in order to improve the print quality "
+"and user experience. Below is an example of all the data that is shared:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
 msgctxt "@label"
-msgid "Description"
+msgid "You need to login first before you can rate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
 msgctxt "@label"
-msgid "Adhesion Information"
+msgid "You need to install the package before you can rate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
 msgctxt "@label"
-msgid "Print settings"
+msgid "ratings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
-msgid "Activate"
+msgid "Back"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+msgctxt "@label"
+msgid "Compatibility"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-msgctxt "@action:button"
-msgid "Remove"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
 msgctxt "@action:label"
-msgid "Printer"
+msgid "Technical Data Sheet"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Could not import material <filename>%1</filename>: <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid ""
-"Failed to export material to <filename>%1</filename>: <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+msgctxt "@action:button"
+msgid "Update"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+msgctxt "@action:button"
+msgid "Updating"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
-msgctxt "@label"
-msgid "Create"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+msgctxt "@action:button"
+msgid "Updated"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
-msgid "Duplicate"
+msgid "Featured"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-msgctxt "@action:button"
-msgid "Rename"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please provide a name for this profile."
+msgid "You will need to restart Cura before changes in packages have effect."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
+msgctxt "@title:tab"
+msgid "Plugins"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:442
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+msgctxt "@title:tab"
+msgid "Materials"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
 msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
+msgid "Downgrade"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
 msgctxt "@action:button"
-msgid "Discard current changes"
+msgid "Uninstall"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid ""
-"This profile uses the defaults specified by the printer, so it has no "
-"settings/overrides in the list below."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
-msgctxt "@label"
-msgid "Interface"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "Language:"
+msgid "The following packages will be added:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:210
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "Currency:"
+msgid ""
+"The following packages can not be installed because of an incompatible Cura "
+"version:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:223
-msgctxt "@label"
-msgid "Theme:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:279
-msgctxt "@label"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
 msgid ""
-"You will need to restart the application for these changes to have effect."
+"You are uninstalling materials and/or profiles that are still in use. "
+"Confirming will reset the following materials/profiles to their defaults."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:296
-msgctxt "@info:tooltip"
-msgid "Slice automatically when changing settings."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:304
-msgctxt "@option:check"
-msgid "Slice automatically"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:318
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
 msgctxt "@label"
-msgid "Viewport behavior"
+msgid "You need to accept the license to install the package"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:326
-msgctxt "@info:tooltip"
-msgid ""
-"Highlight unsupported areas of the model in red. Without support these areas "
-"will not print properly."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
+msgctxt "@label"
+msgid "Website"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:335
-msgctxt "@option:check"
-msgid "Display overhang"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
+msgctxt "@label"
+msgid "Email"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:343
-msgctxt "@info:tooltip"
-msgid ""
-"Moves the camera so the model is in the center of the view when a model is "
-"selected"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:97
+msgctxt "@label"
+msgid "Your rating"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:348
-msgctxt "@action:button"
-msgid "Center camera when item is selected"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:105
+msgctxt "@label"
+msgid "Version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:358
-msgctxt "@info:tooltip"
-msgid "Should the default zoom behavior of cura be inverted?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:112
+msgctxt "@label"
+msgid "Last updated"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:363
-msgctxt "@action:button"
-msgid "Invert the direction of camera zoom."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:119
+msgctxt "@label"
+msgid "Author"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
-msgctxt "@info:tooltip"
-msgid "Should zooming move in the direction of the mouse?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:126
+msgctxt "@label"
+msgid "Downloads"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
-msgctxt "@info:tooltip"
-msgid ""
-"Zooming towards the mouse is not supported in the orthographic perspective."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:384
-msgctxt "@action:button"
-msgid "Zoom toward mouse direction"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:410
-msgctxt "@info:tooltip"
-msgid ""
-"Should models on the platform be moved so that they no longer intersect?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:415
-msgctxt "@option:check"
-msgid "Ensure models are kept apart"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid ""
+"Could not connect to the Cura Package database. Please check your connection."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:424
-msgctxt "@info:tooltip"
-msgid "Should models on the platform be moved down to touch the build plate?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
+msgctxt "@info"
+msgid "Fetching packages..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:429
-msgctxt "@option:check"
-msgid "Automatically drop models to the build plate"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
+msgctxt "@description"
+msgid "Get plugins and materials verified by Ultimaker"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:441
-msgctxt "@info:tooltip"
-msgid "Show caution message in g-code reader."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:450
-msgctxt "@option:check"
-msgid "Caution message in g-code reader"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:458
-msgctxt "@info:tooltip"
-msgid "Should layer be forced into compatibility mode?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid ""
+"To make sure your prints will come out great, you can now adjust your "
+"buildplate. When you click 'Move to Next Position' the nozzle will move to "
+"the different positions that can be adjusted."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463
-msgctxt "@option:check"
-msgid "Force layer view compatibility mode (restart required)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid ""
+"For every position; insert a piece of paper under the nozzle and adjust the "
+"print build plate height. The print build plate height is right when the "
+"paper is slightly gripped by the tip of the nozzle."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:473
-msgctxt "@info:tooltip"
-msgid "Should Cura open at the location it was closed?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:478
-msgctxt "@option:check"
-msgid "Restore window position on start"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
-msgctxt "@info:tooltip"
-msgid "What type of camera rendering should be used?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+msgctxt "@label"
+msgid "Please select any upgrades made to this Ultimaker Original"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:495
-msgctxt "@window:text"
-msgid "Camera rendering:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+msgctxt "@label"
+msgid "Heated Build Plate (official kit or self-built)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:506
-msgid "Perspective"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+msgctxt "@title:window"
+msgid "Connect to Networked Printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
-msgid "Orthographic"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid ""
+"To print directly to your printer over the network, please make sure your "
+"printer is connected to the network using a network cable or by connecting "
+"your printer to your WIFI network. If you don't connect Cura with your "
+"printer, you can still use a USB drive to transfer g-code files to your "
+"printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:538
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
-msgid "Opening and saving files"
+msgid "Select your printer from the list below:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:545
-msgctxt "@info:tooltip"
-msgid "Should models be scaled to the build volume if they are too large?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+msgctxt "@action:button"
+msgid "Edit"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:550
-msgctxt "@option:check"
-msgid "Scale large models"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+msgctxt "@action:button"
+msgid "Remove"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:560
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+msgctxt "@action:button"
+msgid "Refresh"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+msgctxt "@label"
 msgid ""
-"An model may appear extremely small if its unit is for example in meters "
-"rather than millimeters. Should these models be scaled up?"
+"If your printer is not listed, read the <a href='%1'>network printing "
+"troubleshooting guide</a>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:565
-msgctxt "@option:check"
-msgid "Scale extremely small models"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+msgctxt "@label"
+msgid "Type"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
-msgctxt "@info:tooltip"
-msgid "Should models be selected after they are loaded?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+msgctxt "@label"
+msgid "Firmware version"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:580
-msgctxt "@option:check"
-msgid "Select models when loaded"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+msgctxt "@label"
+msgid "Address"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
-msgctxt "@info:tooltip"
-msgid ""
-"Should a prefix based on the printer name be added to the print job name "
-"automatically?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+msgctxt "@label"
+msgid "This printer is not set up to host a group of printers."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:595
-msgctxt "@option:check"
-msgid "Add machine prefix to job name"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 printers."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
-msgctxt "@info:tooltip"
-msgid "Should a summary be shown when saving a project file?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:609
-msgctxt "@option:check"
-msgid "Show summary dialog when saving project"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+msgctxt "@action:button"
+msgid "Connect"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
-msgctxt "@info:tooltip"
-msgid "Default behavior when opening a project file"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+msgctxt "@title:window"
+msgid "Invalid IP address"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:627
-msgctxt "@window:text"
-msgid "Default behavior when opening a project file: "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:641
-msgctxt "@option:openProject"
-msgid "Always ask me this"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+msgctxt "@title:window"
+msgid "Printer Address"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
-msgctxt "@option:openProject"
-msgid "Always open as a project"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+msgctxt "@label"
+msgid "Enter the IP address of your printer on the network."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
-msgctxt "@option:openProject"
-msgid "Always import models"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:679
-msgctxt "@info:tooltip"
-msgid ""
-"When you have made changes to a profile and switched to a different one, a "
-"dialog will be shown asking whether you want to keep your modifications or "
-"not, or you can choose a default behaviour and never show that dialog again."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:688
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "Profiles"
-msgstr ""
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural ""
+"The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:693
-msgctxt "@window:text"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
 msgid ""
-"Default behavior for changed setting values when switching to a different "
-"profile: "
+"The printer %1 is assigned, but the job contains an unknown material "
+"configuration."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:707
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
-msgctxt "@option:discardOrKeep"
-msgid "Always discard changed settings"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
-msgctxt "@option:discardOrKeep"
-msgid "Always transfer changed settings to new profile"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:743
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Privacy"
+msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:750
-msgctxt "@info:tooltip"
-msgid "Should Cura check for updates when the program is started?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+msgctxt "@label"
+msgid ""
+"Override will use the specified settings with the existing printer "
+"configuration. This may result in a failed print."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:755
-msgctxt "@option:check"
-msgid "Check for updates on start"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+msgctxt "@label"
+msgid "Glass"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:765
-msgctxt "@info:tooltip"
-msgid ""
-"Should anonymous data about your print be sent to Ultimaker? Note, no "
-"models, IP addresses or other personally identifiable information is sent or "
-"stored."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:770
-msgctxt "@option:check"
-msgid "Send (anonymous) print information"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:779
-msgctxt "@action:button"
-msgid "More information"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+msgctxt "@label"
+msgid "Delete"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewsSelector.qml:50
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
 msgctxt "@label"
-msgid "View type"
+msgid "Resume"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
-msgid "Object list"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
-msgid "There is no printer found over your network."
+msgid "Resuming..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
 msgctxt "@label"
-msgid "Refresh"
+msgid "Pause"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
-msgid "Add printer by IP"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
-msgid "Troubleshooting"
+msgid "Abort"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
-msgctxt "@label"
-msgid "Ultimaker Cloud"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
-msgctxt "@text"
-msgid "The next generation 3D printing workflow"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+msgctxt "@window:title"
+msgid "Move print job to top"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
-msgctxt "@text"
-msgid "- Send print jobs to Ultimaker printers outside your local network"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
-msgctxt "@text"
-msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+msgctxt "@window:title"
+msgid "Delete print job"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
-msgctxt "@text"
-msgid "- Get exclusive access to print profiles from leading brands"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
-msgctxt "@button"
-msgid "Finish"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+msgctxt "@window:title"
+msgid "Abort print"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
-msgctxt "@button"
-msgid "Create an account"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-msgctxt "@button"
-msgid "Sign in"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
+msgctxt "@info"
+msgid "The webcam is not available because you are monitoring a cloud printer."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+msgctxt "@label:status"
+msgid "Loading..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Place enter your printer's IP address."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+msgctxt "@label:status"
+msgid "Unavailable"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-msgctxt "@text"
-msgid "Please enter a valid IP address."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Unreachable"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+msgctxt "@label:status"
+msgid "Idle"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:204
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
 msgctxt "@label"
-msgid "Could not connect to device."
+msgid "Untitled"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:208
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
+msgid "Anonymous"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:240
-msgctxt "@label"
-msgid ""
-"This printer cannot be added because it's an unknown printer or it's not the "
-"host of a group."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
+msgctxt "@label:status"
+msgid "Requires configuration changes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:258
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-msgctxt "@label"
-msgid "Type"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
+msgctxt "@action:button"
+msgid "Details"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:274
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Firmware version"
+msgid "Unavailable printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:290
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Address"
+msgid "First available"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:329
-msgctxt "@button"
-msgid "Back"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:342
-msgctxt "@button"
-msgid "Connect"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Next"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+msgctxt "@label:status"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid ""
-"Ultimaker Cura collects anonymous data to improve print quality and user "
-"experience, including:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid ""
-"Data collected by Ultimaker Cura will not contain any personal information."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+msgctxt "@label"
+msgid "Queued"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
 msgctxt "@label"
-msgid "Add a printer"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
 msgctxt "@label"
-msgid "Add a networked printer"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
 msgctxt "@label"
-msgid "Add a non-networked printer"
+msgid "Total print time"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
 msgctxt "@label"
-msgid "User Agreement"
+msgid "Waiting for"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Printer name"
+msgid "Printer selection"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+msgctxt "@label"
+msgid "Your key to connected 3D printing"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
 msgctxt "@text"
-msgid "Please give your printer a name"
+msgid ""
+"- Customize your experience with more print profiles and plugins\n"
+"- Stay flexible by syncing your setup and loading it anywhere\n"
+"- Increase efficiency with a remote workflow on Ultimaker printers"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
+msgctxt "@button"
+msgid "Create account"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:22
+msgctxt "@label The argument is a username."
+msgid "Hi %1"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:33
+msgctxt "@button"
+msgid "Ultimaker account"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:42
+msgctxt "@button"
+msgid "Sign out"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Empty"
+msgid "No time estimation available"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
+msgid "No cost estimation available"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
+msgid "Time estimation"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+msgctxt "@label"
+msgid "Material estimation"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Add printer"
+msgid "Processing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Manage printers"
+msgid "Slice"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Connected printers"
+msgid "Start the slicing process"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+msgctxt "@button"
+msgid "Cancel"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
+msgctxt "@action:inmenu"
+msgid "Show Online Troubleshooting Guide"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
+msgctxt "@action:inmenu"
+msgid "Toggle Full Screen"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
+msgctxt "@action:inmenu"
+msgid "Exit Full Screen"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
+msgctxt "@action:inmenu menubar:view"
 msgid "3D View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+msgctxt "@action:inmenu menubar:view"
 msgid "Front View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+msgctxt "@action:inmenu menubar:view"
 msgid "Top View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+msgctxt "@action:inmenu menubar:view"
+msgid "Left Side View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+msgctxt "@action:inmenu menubar:view"
+msgid "Right Side View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
-msgctxt "@label:header"
-msgid "Custom profiles"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the "
-"profile.\n"
-"\n"
-"Click to open the profile manager."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt ""
-"@label %1 is filled in with the type of a profile. %2 is filled with a list "
-"of numbers (eg '1' or '1, 2')"
-msgid ""
-"There is no %1 profile for the configuration in extruder %2. The default "
-"intent will be used instead"
-msgid_plural ""
-"There is no %1 profile for the configurations in extruders %2. The default "
-"intent will be used instead"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected Model"
+msgid_plural "Delete Selected Models"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected Model"
+msgid_plural "Center Selected Models"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid ""
-"Generate structures to support parts of the model which have overhangs. "
-"Without these structures, such parts would collapse during printing."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-msgctxt "@label"
-msgid "Infill"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
-msgctxt "@label"
-msgid "Gradual infill"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid ""
-"Gradual infill will gradually increase the amount of infill towards the top."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid ""
-"You have modified some profile settings. If you want to change these go to "
-"custom mode."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid ""
-"Enable printing a brim or raft. This will add a flat area around or under "
-"your object which is easy to cut off afterwards."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated "
-"value.\n"
-"\n"
-"Click to make these settings visible."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:463
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:472
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:509
-msgctxt "@action:menu"
-msgid "Hide this setting"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:522
-msgctxt "@action:menu"
-msgid "Don't show this setting"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:526
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:545
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:441
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:545
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid ""
-"This setting is not used because all the settings that it influences are "
-"overridden."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
+msgctxt "@action:menu"
+msgid "&Marketplace"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:242
+msgctxt "@label"
+msgid "This package will be installed after restarting."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:435
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
+msgctxt "@title:tab"
+msgid "General"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid ""
-"This setting is always shared between all extruders. Changing it here will "
-"change the value for all extruders."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:438
+msgctxt "@title:tab"
+msgid "Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "The value is resolved from per-extruder values "
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:440
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
+msgctxt "@title:tab"
+msgid "Printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:444
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+msgctxt "@title:tab"
+msgid "Profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value "
-"set.\n"
-"\n"
-"Click to restore the calculated value."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:563
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
-msgctxt "@label"
-msgid "The next generation 3D printing workflow"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:564
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:576
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Send print jobs to Ultimaker printers outside your local network\n"
-"- Store your Ultimaker Cura settings in the cloud for use anywhere\n"
-"- Get exclusive access to print profiles from leading brands"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:614
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+msgctxt "@title:window"
+msgid "Open file(s)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-msgctxt "@button"
-msgid "Create account"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:720
+msgctxt "@window:title"
+msgid "Install Package"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:22
-msgctxt "@label The argument is a username."
-msgid "Hi %1"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:728
+msgctxt "@title:window"
+msgid "Open File(s)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:33
-msgctxt "@button"
-msgid "Ultimaker account"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:731
+msgctxt "@text:window"
+msgid ""
+"We have found one or more G-Code files within the files you have selected. "
+"You can only open one G-Code file at a time. If you want to open a G-Code "
+"file, please just select only one."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/UserOperations.qml:42
-msgctxt "@button"
-msgid "Sign out"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:834
+msgctxt "@title:window"
+msgid "Add Printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:842
+msgctxt "@title:window"
+msgid "What's New"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
-msgctxt "@title:window"
-msgid "About "
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+msgctxt "@title:window The argument is the application name."
+msgid "About %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
 "Cura proudly uses the following open source projects:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for analysis of complex networks"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
 msgctxt "@Label"
 msgid "Python HTTP library"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@label"
 msgid "Font"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "SVG icons"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
+msgctxt "@text:window"
+msgid ""
+"This is a Cura project file. Would you like to open it as a project or "
+"import the models from it?"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
+msgctxt "@action:button"
+msgid "Import models"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
 msgid "Discard or Keep changes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
 msgctxt "@text:window"
 msgid ""
 "You have customized some profile settings.\n"
 "Would you like to keep or discard those settings?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
 msgctxt "@title:column"
 msgid "Profile settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
 msgctxt "@title:column"
 msgid "Default"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
 msgctxt "@title:column"
 msgid "Customized"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
 msgctxt "@option:discardOrKeep"
 msgid "Discard and never ask again"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
 msgctxt "@option:discardOrKeep"
 msgid "Keep and never ask again"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
 msgctxt "@action:button"
 msgid "Discard"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
 msgctxt "@action:button"
 msgid "Keep"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
 msgctxt "@action:button"
 msgid "Create New Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
 msgctxt "@text:window"
 msgid ""
 "We have found one or more project file(s) within the files you have "
@@ -3410,2345 +3694,2100 @@ msgid ""
 "import models from those files. Would you like to proceed?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid ""
-"This is a Cura project file. Would you like to open it as a project or "
-"import the models from it?"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
-msgctxt "@action:label"
-msgid "Type"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
-msgctxt "@action:label"
-msgid "Name"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
 msgctxt "@action:label"
 msgid "Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
 msgctxt "@action:label"
-msgid "Profile settings"
+msgid "Don't show project summary on save again"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
-msgctxt "@action:label"
-msgid "Not in profile"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
+msgctxt "@action:button"
+msgid "Save"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
-msgctxt "@action:label"
-msgid "Intent"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+msgctxt "@text Print job name"
+msgid "Untitled"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
-msgctxt "@action:button"
-msgid "Save"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
 msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
+msgid "&Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
 msgctxt "@title:menu menubar:toplevel"
 msgid "E&xtensions"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:93
 msgctxt "@title:menu menubar:toplevel"
 msgid "P&references"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:101
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Help"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:147
 msgctxt "@title:window"
 msgid "New project"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:125
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
 msgctxt "@info:question"
 msgid ""
 "Are you sure you want to start a new project? This will clear the build "
 "plate and any unsaved settings."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid ""
+"This configuration is not available because %1 is not recognized. Please "
+"visit %2 to download the correct material profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:124
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid ""
+"The configurations are not available because the printer is disconnected."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:139
-msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:146
-msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:153
-msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:160
-msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
+msgctxt "@label"
+msgid "Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:187
-msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:195
-msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
+msgctxt "@title:menu menubar:file"
+msgid "&Save..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
 msgctxt "@action:inmenu"
-msgid "Delete Model"
+msgid "Set as Active Extruder"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
+msgid "Enable Extruder"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:347
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
 msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
+msgid "Manage Setting Visibility..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid ""
-"Ultimaker Cura collects anonymous data in order to improve the print quality "
-"and user experience. Below is an example of all the data that is shared:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+msgctxt "@label"
+msgid "Abort Print"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+msgctxt "@label"
+msgid "Are you sure you want to abort the print?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
+msgctxt "@label"
+msgid "Interface"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:211
+msgctxt "@label"
+msgid "Currency:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:224
+msgctxt "@label"
+msgid "Theme:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:280
+msgctxt "@label"
+msgid ""
+"You will need to restart the application for these changes to have effect."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:297
 msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
+msgid "Slice automatically when changing settings."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:305
+msgctxt "@option:check"
+msgid "Slice automatically"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:319
+msgctxt "@label"
+msgid "Viewport behavior"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:327
 msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
+msgid ""
+"Highlight unsupported areas of the model in red. Without support these areas "
+"will not print properly."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:336
+msgctxt "@option:check"
+msgid "Display overhang"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:344
 msgctxt "@info:tooltip"
 msgid ""
-"For lithophanes dark pixels should correspond to thicker locations in order "
-"to block more light coming through. For height maps lighter pixels signify "
-"higher terrain, so lighter pixels should correspond to thicker locations in "
-"the generated 3D model."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
+"Moves the camera so the model is in the center of the view when a model is "
+"selected"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:349
+msgctxt "@action:button"
+msgid "Center camera when item is selected"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:359
 msgctxt "@info:tooltip"
-msgid ""
-"For lithophanes a simple logarithmic model for translucency is available. "
-"For height maps the pixel values correspond to heights linearly."
+msgid "Should the default zoom behavior of cura be inverted?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:364
+msgctxt "@action:button"
+msgid "Invert the direction of camera zoom."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
+msgctxt "@info:tooltip"
+msgid "Should zooming move in the direction of the mouse?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
 msgctxt "@info:tooltip"
 msgid ""
-"The percentage of light penetrating a print with a thickness of 1 "
-"millimeter. Lowering this value increases the contrast in dark regions and "
-"decreases the contrast in light regions of the image."
+"Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:385
+msgctxt "@action:button"
+msgid "Zoom toward mouse direction"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
 msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
+msgid ""
+"Should models on the platform be moved so that they no longer intersect?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
+msgctxt "@option:check"
+msgid "Ensure models are kept apart"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:425
+msgctxt "@info:tooltip"
+msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:430
+msgctxt "@option:check"
+msgid "Automatically drop models to the build plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:88
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:203
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:223
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:243
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:285
-msgctxt "@label"
-msgid "mm"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
+msgctxt "@info:tooltip"
+msgid "Show caution message in g-code reader."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:451
+msgctxt "@option:check"
+msgid "Caution message in g-code reader"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:459
+msgctxt "@info:tooltip"
+msgid "Should layer be forced into compatibility mode?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:464
+msgctxt "@option:check"
+msgid "Force layer view compatibility mode (restart required)"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:474
+msgctxt "@info:tooltip"
+msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:479
+msgctxt "@option:check"
+msgid "Restore window position on start"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:489
+msgctxt "@info:tooltip"
+msgid "What type of camera rendering should be used?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:496
+msgctxt "@window:text"
+msgid "Camera rendering:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
+msgid "Perspective"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:84
-msgctxt "@label"
-msgid "Y (Depth)"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:508
+msgid "Orthographic"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:539
 msgctxt "@label"
-msgid "Z (Height)"
+msgid "Opening and saving files"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
-msgctxt "@label"
-msgid "Build plate shape"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:546
+msgctxt "@info:tooltip"
+msgid "Should models be scaled to the build volume if they are too large?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
-msgctxt "@label"
-msgid "Origin at center"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:551
+msgctxt "@option:check"
+msgid "Scale large models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
-msgctxt "@label"
-msgid "Heated bed"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:561
+msgctxt "@info:tooltip"
+msgid ""
+"An model may appear extremely small if its unit is for example in meters "
+"rather than millimeters. Should these models be scaled up?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
-msgctxt "@label"
-msgid "Heated build volume"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:566
+msgctxt "@option:check"
+msgid "Scale extremely small models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
-msgctxt "@label"
-msgid "G-code flavor"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:576
+msgctxt "@info:tooltip"
+msgid "Should models be selected after they are loaded?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
-msgctxt "@title:label"
-msgid "Printhead Settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:581
+msgctxt "@option:check"
+msgid "Select models when loaded"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:199
-msgctxt "@label"
-msgid "X min"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:591
+msgctxt "@info:tooltip"
+msgid ""
+"Should a prefix based on the printer name be added to the print job name "
+"automatically?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:219
-msgctxt "@label"
-msgid "Y min"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
+msgctxt "@option:check"
+msgid "Add machine prefix to job name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:239
-msgctxt "@label"
-msgid "X max"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:606
+msgctxt "@info:tooltip"
+msgid "Should a summary be shown when saving a project file?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:610
+msgctxt "@option:check"
+msgid "Show summary dialog when saving project"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:281
-msgctxt "@label"
-msgid "Gantry Height"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+msgctxt "@info:tooltip"
+msgid "Default behavior when opening a project file"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:295
-msgctxt "@label"
-msgid "Number of Extruders"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:628
+msgctxt "@window:text"
+msgid "Default behavior when opening a project file: "
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
-msgctxt "@label"
-msgid "Shared Heater"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
+msgctxt "@option:openProject"
+msgid "Always ask me this"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:367
-msgctxt "@title:label"
-msgid "Start G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
+msgctxt "@option:openProject"
+msgid "Always open as a project"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:378
-msgctxt "@title:label"
-msgid "End G-code"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:644
+msgctxt "@option:openProject"
+msgid "Always import models"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
+msgctxt "@info:tooltip"
+msgid ""
+"When you have made changes to a profile and switched to a different one, a "
+"dialog will be shown asking whether you want to keep your modifications or "
+"not, or you can choose a default behaviour and never show that dialog again."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:689
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
 msgctxt "@label"
-msgid "Compatibility"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
+msgid "Profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:694
+msgctxt "@window:text"
+msgid ""
+"Default behavior for changed setting values when switching to a different "
+"profile: "
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
+msgctxt "@option:discardOrKeep"
+msgid "Always discard changed settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:710
+msgctxt "@option:discardOrKeep"
+msgid "Always transfer changed settings to new profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:744
+msgctxt "@label"
+msgid "Privacy"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:751
+msgctxt "@info:tooltip"
+msgid "Should Cura check for updates when the program is started?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
-msgctxt "@label"
-msgid "ratings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
+msgctxt "@option:check"
+msgid "Check for updates on start"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:766
+msgctxt "@info:tooltip"
+msgid ""
+"Should anonymous data about your print be sent to Ultimaker? Note, no "
+"models, IP addresses or other personally identifiable information is sent or "
+"stored."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-msgctxt "@action:button"
-msgid "Update"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
+msgctxt "@option:check"
+msgid "Send (anonymous) print information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
 msgctxt "@action:button"
-msgid "Updating"
+msgid "More information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
 msgctxt "@action:button"
-msgid "Updated"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
+msgid "Activate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
 msgctxt "@action:button"
-msgid "Downgrade"
+msgid "Rename"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:45
-msgctxt "@info:button"
-msgid "Quit Cura"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to login first before you can rate"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
-msgctxt "@label"
-msgid "You need to install the package before you can rate"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Featured"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
+msgid "Create"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
 msgctxt "@action:button"
-msgid "Installed"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
+msgid "Duplicate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
 msgctxt "@action:button"
-msgid "Back"
+msgid "Import"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
 msgctxt "@action:button"
-msgid "Install"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
-msgctxt "@title:tab"
-msgid "Plugins"
+msgid "Export"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
+msgctxt "@title:window"
+msgid "Confirm Remove"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:95
-msgctxt "@label"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid ""
-"The following packages can not be installed because of an incompatible Cura "
-"version:"
+"Could not import material <filename>%1</filename>: <message>%2</message>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
 msgctxt "@title:window"
-msgid "Confirm uninstall"
+msgid "Export Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
 msgid ""
-"You are uninstalling materials and/or profiles that are still in use. "
-"Confirming will reset the following materials/profiles to their defaults."
+"Failed to export material to <filename>%1</filename>: <message>%2</message>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:93
-msgctxt "@label"
-msgid "Your rating"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid ""
+"The new filament diameter is set to %1 mm, which is not compatible with the "
+"current extruder. Do you wish to continue?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:101
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Version"
+msgid "Display Name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Last updated"
+msgid "Brand"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Author"
+msgid "Material Type"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:122
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Downloads"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
-msgctxt "@description"
-msgid "Get plugins and materials verified by Ultimaker"
+msgid "Color"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Community Contributions"
+msgid "Properties"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Community Plugins"
+msgid "Density"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid ""
-"Could not connect to the Cura Package database. Please check your connection."
+msgid "Diameter"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
 msgctxt "@label"
-msgid "Website"
+msgid "Filament Cost"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Email"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
+msgid "Filament weight"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
 msgctxt "@label"
-msgid ""
-"To make sure your prints will come out great, you can now adjust your "
-"buildplate. When you click 'Move to Next Position' the nozzle will move to "
-"the different positions that can be adjusted."
+msgid "Filament length"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
 msgctxt "@label"
-msgid ""
-"For every position; insert a piece of paper under the nozzle and adjust the "
-"print build plate height. The print build plate height is right when the "
-"paper is slightly gripped by the tip of the nozzle."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
+msgid "Cost per Meter"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
+msgid "This material is linked to %1 and shares some of its properties."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
+msgid "Unlink Material"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
 msgctxt "@label"
-msgid ""
-"To print directly to your printer over the network, please make sure your "
-"printer is connected to the network using a network cable or by connecting "
-"your printer to your WIFI network. If you don't connect Cura with your "
-"printer, you can still use a USB drive to transfer g-code files to your "
-"printer."
+msgid "Description"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
 msgctxt "@label"
-msgid "Select your printer from the list below:"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
+msgid "Adhesion Information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
 msgctxt "@label"
-msgid ""
-"If your printer is not listed, read the <a href='%1'>network printing "
-"troubleshooting guide</a>"
+msgid "Print settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
 msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
+msgid "Create"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
 msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
+msgid "Duplicate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
-msgctxt "@action:button"
-msgid "Connect"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
 msgctxt "@title:window"
-msgid "Invalid IP address"
+msgid "Duplicate Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
 msgctxt "@title:window"
-msgid "Printer Address"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:132
-msgctxt "@label"
-msgid "Unavailable printer"
+msgid "Rename Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:134
-msgctxt "@label"
-msgid "First available"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
+msgctxt "@title:window"
+msgid "Import Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:183
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
-msgctxt "@label"
-msgid "Glass"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
+msgctxt "@title:window"
+msgid "Export Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:248
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
 msgctxt "@action:button"
-msgid "Override"
+msgid "Discard current changes"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural ""
-"The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
+msgctxt "@action:label"
 msgid ""
-"The printer %1 is assigned, but the job contains an unknown material "
-"configuration."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
+"This profile uses the defaults specified by the printer, so it has no "
+"settings/overrides in the list below."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
+msgctxt "@title:tab"
+msgid "Global Settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid ""
-"Override will use the specified settings with the existing printer "
-"configuration. This may result in a failed print."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
-msgctxt "@label"
-msgid "Aluminum"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+msgctxt "@label"
+msgid "Extruder"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+msgctxt "@tooltip"
+msgid ""
+"The target temperature of the hotend. The hotend will heat up or cool down "
+"towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
-msgctxt "@info"
-msgid "The webcam is not available because you are monitoring a cloud printer."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+msgctxt "@button"
+msgid "Pre-heat"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+msgctxt "@tooltip of pre-heat"
+msgid ""
+"Heat the hotend in advance before printing. You can continue adjusting your "
+"print while it is heating, and you won't have to wait for the hotend to heat "
+"up when you're ready to print."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+msgctxt "@tooltip"
+msgid "The material in this extruder."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
-msgid "Untitled"
+msgid "Build plate"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
-msgctxt "@label"
-msgid "Anonymous"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+msgctxt "@tooltip"
+msgid ""
+"The target temperature of the heated bed. The bed will heat up or cool down "
+"towards this temperature. If this is 0, the bed heating is turned off."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
-msgctxt "@label:status"
-msgid "Requires configuration changes"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
-msgctxt "@action:button"
-msgid "Details"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+msgctxt "@tooltip of pre-heat"
+msgid ""
+"Heat the bed in advance before printing. You can continue adjusting your "
+"print while it is heating, and you won't have to wait for the bed to heat up "
+"when you're ready to print."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
-msgid "Delete"
+msgid "Printer control"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
-msgid "Pausing..."
+msgid "Jog Position"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
-msgid "Resuming..."
+msgid "X/Y"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
-msgid "Aborting..."
+msgid "Z"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
-msgid "Abort"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
+msgid "Jog Distance"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+msgctxt "@label"
+msgid "Send G-code"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+msgctxt "@tooltip of G-code command input"
+msgid ""
+"Send a custom G-code command to the connected printer. Press 'enter' to send "
+"the command."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+msgctxt "@info:status"
+msgid "The printer is not connected."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
+msgctxt "@button"
+msgid "Add printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
+msgctxt "@button"
+msgid "Manage printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Printer selection"
+msgid "Connected printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Queued"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
+msgid "Preset printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgid "Active print"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
 msgctxt "@label"
-msgid "Print jobs"
+msgid "Job Name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
 msgctxt "@label"
-msgid "Total print time"
+msgid "Printing Time"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
 msgctxt "@label"
-msgid "Waiting for"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
-msgctxt "@action:ComboBox option"
-msgid "Update"
+msgid "Estimated time left"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
-msgctxt "@action:ComboBox option"
-msgid "Create new"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the "
+"profile.\n"
+"\n"
+"Click to open the profile manager."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
-msgctxt "@action:label"
-msgid "Derivative from"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
+msgctxt "@label:header"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt ""
+"@label %1 is filled in with the type of a profile. %2 is filled with a list "
+"of numbers (eg '1' or '1, 2')"
+msgid ""
+"There is no %1 profile for the configuration in extruder %2. The default "
+"intent will be used instead"
+msgid_plural ""
+"There is no %1 profile for the configurations in extruders %2. The default "
+"intent will be used instead"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
-msgctxt "@action:label"
-msgid "Material settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
-msgctxt "@action:label"
-msgid "Setting visibility"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
-msgctxt "@action:label"
-msgid "Mode"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
-msgctxt "@action:label"
-msgid "Visible settings:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
-msgctxt "@action:label"
-msgid "%1 out of %2"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+msgctxt "@label"
+msgid "Adhesion"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
-msgctxt "@action:button"
-msgid "Open"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid ""
+"Enable printing a brim or raft. This will add a flat area around or under "
+"your object which is easy to cut off afterwards."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
 msgctxt "@label"
-msgid "Mesh Type"
+msgid "Gradual infill"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
 msgctxt "@label"
-msgid "Normal model"
+msgid ""
+"Gradual infill will gradually increase the amount of infill towards the top."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
-msgctxt "@label"
-msgid "Print as support"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid ""
+"You have modified some profile settings. If you want to change these go to "
+"custom mode."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
 msgctxt "@label"
-msgid "Modify settings for overlaps"
+msgid "Support"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
 msgctxt "@label"
-msgid "Don't support overlaps"
+msgid ""
+"Generate structures to support parts of the model which have overhangs. "
+"Without these structures, such parts would collapse during printing."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:147
-msgctxt "@action:checkbox"
-msgid "Infill only"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated "
+"value.\n"
+"\n"
+"Click to make these settings visible."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:368
-msgctxt "@action:button"
-msgid "Select settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
+msgctxt "@label"
+msgid ""
+"This setting is not used because all the settings that it influences are "
+"overridden."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
-msgctxt "@label:checkbox"
-msgid "Show all"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
+msgctxt "@label"
+msgid ""
+"This setting is always shared between all extruders. Changing it here will "
+"change the value for all extruders."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Post Processing Scripts"
+msgid "This setting is resolved from conflicting extruder-specific values:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
+msgctxt "@label"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Settings"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value "
+"set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:493
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
-msgctxt "@title"
-msgid "Update Firmware"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:463
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
-msgctxt "@label"
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer. This "
-"firmware controls the step motors, regulates the temperature and ultimately "
-"makes your printer work."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:472
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
-msgctxt "@label"
-msgid ""
-"The firmware shipping with new printers works, but new versions tend to have "
-"more features and improvements."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:509
+msgctxt "@action:menu"
+msgid "Hide this setting"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
-msgctxt "@action:button"
-msgid "Automatically upgrade Firmware"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:522
+msgctxt "@action:menu"
+msgid "Don't show this setting"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
-msgctxt "@action:button"
-msgid "Upload custom Firmware"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:526
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
-msgctxt "@label"
-msgid ""
-"Firmware can not be updated because there is no connection with the printer."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
-msgctxt "@label"
-msgid ""
-"Firmware can not be updated because the connection with the printer does not "
-"support upgrading firmware."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
-msgctxt "@title:window"
-msgid "Select custom firmware"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
-msgctxt "@title:window"
-msgid "Firmware Update"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
-msgctxt "@label"
-msgid "Updating firmware."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
 msgctxt "@label"
-msgid "Firmware update completed."
+msgid "View type"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
 msgctxt "@label"
-msgid "Firmware update failed due to an unknown error."
+msgid "Printer name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
-msgctxt "@label"
-msgid "Firmware update failed due to an communication error."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
+msgctxt "@text"
+msgid "Please give your printer a name"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Firmware update failed due to an input/output error."
+msgid "Add a printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
 msgctxt "@label"
-msgid "Firmware update failed due to missing firmware."
+msgid "Add a networked printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
+msgctxt "@label"
+msgid "Add a non-networked printer"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
-msgctxt "@info"
-msgid "Please connect your printer to the network."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
+msgctxt "@label"
+msgid "There is no printer found over your network."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
+msgctxt "@label"
+msgid "Refresh"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
+msgctxt "@label"
+msgid "Add printer by IP"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
+msgctxt "@label"
+msgid "Troubleshooting"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Place enter your printer's IP address."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+msgctxt "@label"
+msgid "Could not connect to device."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+msgctxt "@label"
+msgid "Can't connect to your Ultimaker printer?"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+msgctxt "@label"
+msgid "The printer at this address has not responded yet."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+msgctxt "@label"
+msgid ""
+"This printer cannot be added because it's an unknown printer or it's not the "
+"host of a group."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
 msgctxt "@button"
-msgid "Restore"
-msgstr ""
-
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
+msgid "Back"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
+msgctxt "@label"
+msgid "Ultimaker Account"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid ""
-"You will need to restart Cura before your backup is restored. Do you want to "
-"close Cura now?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
+msgctxt "@text"
+msgid "Your key to connected 3D printing"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
+msgctxt "@text"
+msgid "- Customize your experience with more print profiles and plugins"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
+msgctxt "@text"
+msgid "- Stay flexible by syncing your setup and loading it anywhere"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid ""
-"You don't have any backups currently. Use the 'Backup Now' button to create "
-"one."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
+msgctxt "@text"
+msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid ""
-"During the preview phase, you'll be limited to 5 visible backups. Remove a "
-"backup to see older ones."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
+msgctxt "@button"
+msgid "Finish"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
+msgctxt "@button"
+msgid "Create an account"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
 msgctxt "@label"
-msgid "Color scheme"
+msgid "Help us to improve Ultimaker Cura"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid ""
+"Ultimaker Cura collects anonymous data to improve print quality and user "
+"experience, including:"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Feedrate"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid ""
+"Data collected by Ultimaker Cura will not contain any personal information."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
 msgctxt "@label"
-msgid "Shell"
+msgid "Empty"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Only Show Top Layers"
+msgid "User Agreement"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
 msgctxt "@label"
-msgid "Top / Bottom"
+msgid "Welcome to Ultimaker Cura"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
+msgctxt "@text"
+msgid ""
+"Please follow these steps to set up\n"
+"Ultimaker Cura. This will only take a few moments."
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
-msgctxt "@label"
-msgid "min"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
+msgctxt "@button"
+msgid "Get started"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
 msgctxt "@label"
-msgid "max"
+msgid "What's new in Ultimaker Cura"
 msgstr ""
 
-#: /home/ruben/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
+#: ModelChecker/plugin.json
+msgctxt "description"
 msgid ""
-"Some things could be problematic in this print. Click to see tips for "
-"adjustment."
+"Checks models and print configuration for possible printing issues and give "
+"suggestions."
 msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr ""
+
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
+msgid "Provides support for reading 3MF files."
 msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
+msgid "3MF Reader"
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgid "Provides support for writing 3MF files."
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Slice info"
+msgid "3MF Writer"
 msgstr ""
 
-#: ImageReader/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
+msgid "Provides support for reading AMF files."
 msgstr ""
 
-#: ImageReader/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
+msgid "AMF Reader"
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid ""
-"Provides a way to change machine settings (such as build volume, nozzle "
-"size, etc.)."
+msgid "Backup and restore your configuration."
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Machine Settings action"
+msgid "Cura Backups"
 msgstr ""
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
+msgid "Provides the link to the CuraEngine slicing backend."
 msgstr ""
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
+msgid "CuraEngine Backend"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
+msgid "Provides support for importing Cura profiles."
 msgstr ""
 
-#: Toolbox/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Toolbox"
+msgid "Cura Profile Reader"
 msgstr ""
 
-#: AMFReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
+msgid "Provides support for exporting Cura profiles."
 msgstr ""
 
-#: AMFReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
+msgid "Cura Profile Writer"
 msgstr ""
 
-#: SolidView/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
+msgid "Checks for firmware updates."
 msgstr ""
 
-#: SolidView/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Solid View"
+msgid "Firmware Update Checker"
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid ""
-"Provides machine actions for Ultimaker machines (such as bed leveling "
-"wizard, selecting upgrades, etc.)."
+msgid "Provides a machine actions for updating firmware."
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
+msgid "Firmware Updater"
 msgstr ""
 
-#: USBPrinting/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid ""
-"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgid "Reads g-code from a compressed archive."
 msgstr ""
 
-#: USBPrinting/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
+msgid "Compressed G-code Reader"
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
+msgid "Writes g-code to a compressed archive."
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
+msgid "Compressed G-code Writer"
 msgstr ""
 
-#: 3MFReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
+msgid "Provides support for importing profiles from g-code files."
 msgstr ""
 
-#: 3MFReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
+msgid "G-code Profile Reader"
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid ""
-"Creates an eraser mesh to block the printing of support in certain places"
+msgid "Allows loading and displaying G-code files."
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
+msgid "G-code Reader"
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
+msgid "Writes g-code to a file."
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
+msgid "G-code Writer"
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
+msgid "Enables ability to generate printable geometry from 2D image files."
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
+msgid "Image Reader"
 msgstr ""
 
-#: XRayView/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
+msgid "Provides support for importing profiles from legacy Cura versions."
 msgstr ""
 
-#: XRayView/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
+msgid "Legacy Cura Profile Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgid ""
+"Provides a way to change machine settings (such as build volume, nozzle "
+"size, etc.)."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
+msgid "Machine Settings Action"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgid "Provides a monitor stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
+msgid "Monitor Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgid "Provides the Per Model Settings."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
+msgid "Per Model Settings Tool"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgid "Extension that allows for user created scripts for post processing"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
+msgid "Post Processing"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgid "Provides a prepare stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
+msgid "Prepare Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgid "Provides a preview stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
+msgid "Preview Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgid "Provides removable drive hotplugging and writing support."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
+msgid "Removable Drive Output Device Plugin"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgid "Logs certain events so that they can be used by the crash reporter"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
+msgid "Sentry Logger"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgid "Provides the Simulation view."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
+msgid "Simulation View"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
+msgid "Slice info"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgid "Provides a normal solid mesh view."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
+msgid "Solid View"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgid ""
+"Creates an eraser mesh to block the printing of support in certain places"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
+msgid "Support Eraser"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgid "Find, manage and install new Cura packages."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
+msgid "Toolbox"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgid "Provides support for reading model files."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
+msgid "Trimesh Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgid "Provides support for reading Ultimaker Format Packages."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
+msgid "UFP Reader"
 msgstr ""
 
-#: GCodeReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
+msgid "Provides support for writing Ultimaker Format Packages."
 msgstr ""
 
-#: GCodeReader/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
+msgid "UFP Writer"
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
+msgid ""
+"Provides machine actions for Ultimaker machines (such as bed leveling "
+"wizard, selecting upgrades, etc.)."
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Post Processing"
+msgid "Ultimaker machine actions"
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
+msgid "Manages network connections to Ultimaker networked printers."
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
+msgid "Ultimaker Network Connection"
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
+msgid ""
+"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
+msgid "USB printing"
 msgstr ""
 
-#: UFPReader/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
 msgstr ""
 
-#: UFPReader/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
+msgid "Version Upgrade 2.1 to 2.2"
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
+msgid "Version Upgrade 2.2 to 2.4"
 msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
 msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
+msgid "Version Upgrade 2.5 to 2.6"
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
+msgid "Version Upgrade 2.6 to 2.7"
 msgstr ""
 
-#: PrepareStage/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
 msgstr ""
 
-#: PrepareStage/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
+msgid "Version Upgrade 2.7 to 3.0"
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
+msgid "Version Upgrade 3.0 to 3.1"
 msgstr ""
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
 msgstr ""
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
+msgid "Version Upgrade 3.2 to 3.3"
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
+msgid "Version Upgrade 3.3 to 3.4"
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
+msgid "Version Upgrade 3.4 to 3.5"
 msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
 msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
+msgid "Version Upgrade 3.5 to 4.0"
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
+msgid "Version Upgrade 4.0 to 4.1"
 msgstr ""
 
-#: X3DReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
 msgstr ""
 
-#: X3DReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
+msgid "Version Upgrade 4.1 to 4.2"
 msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
 msgstr ""
 
-#: SimulationView/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Simulation View"
+msgid "Version Upgrade 4.2 to 4.3"
 msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
 msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
+msgid "Version Upgrade 4.3 to 4.4"
 msgstr ""
 
-#: UFPWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
 msgstr ""
 
-#: UFPWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
+msgid "Version Upgrade 4.4 to 4.5"
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid ""
-"Checks models and print configuration for possible printing issues and give "
-"suggestions."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Model Checker"
+msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
+msgid "Provides support for reading X3D files."
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
+msgid "X3D Reader"
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
+msgid "Provides capabilities to read and write XML-based material profiles."
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
+msgid "Material Profiles"
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
+msgid "Provides the X-Ray view."
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
+msgid "X-Ray View"
 msgstr ""
diff --git a/resources/i18n/fdmextruder.def.json.pot b/resources/i18n/fdmextruder.def.json.pot
index b4ac694bb6..2c8bc10246 100644
--- a/resources/i18n/fdmextruder.def.json.pot
+++ b/resources/i18n/fdmextruder.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-02-07 14:19+0000\n"
+"POT-Creation-Date: 2020-04-06 16:33+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index a8de37f445..45519985a1 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-02-07 14:19+0000\n"
+"POT-Creation-Date: 2020-04-06 16:33+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -74,7 +74,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_guid description"
-msgid "GUID of the material. This is set automatically. "
+msgid "GUID of the material. This is set automatically."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -310,18 +310,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "machine_filament_park_distance label"
-msgid "Filament Park Distance"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "machine_filament_park_distance description"
-msgid ""
-"The distance from the tip of the nozzle where to park the filament when an "
-"extruder is no longer used."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "machine_nozzle_temp_enabled label"
 msgid "Enable Nozzle Temperature Control"
 msgstr ""
@@ -1402,6 +1390,18 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "hole_xy_offset label"
+msgid "Hole Horizontal Expansion"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset description"
+msgid ""
+"Amount of offset applied to all holes in each layer. Positive values "
+"increase the size of the holes, negative values reduce the size of the holes."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "z_seam_type label"
 msgid "Z Seam Alignment"
 msgstr ""
@@ -2502,7 +2502,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_flush_purge_speed description"
-msgid "Material Station internal value"
+msgid "How fast to prime the material after switching to a different material."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2512,27 +2512,34 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_flush_purge_length description"
-msgid "Material Station internal value"
+msgid ""
+"How much material to use to purge the previous material out of the nozzle "
+"(in length of filament) when switching to a different material."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_speed label"
-msgid "End Of Filament Purge Speed"
+msgid "End of Filament Purge Speed"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_speed description"
-msgid "Material Station internal value"
+msgid ""
+"How fast to prime the material after replacing an empty spool with a fresh "
+"spool of the same material."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_length label"
-msgid "End Of Filament Purge Length"
+msgid "End of Filament Purge Length"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_end_of_filament_purge_length description"
-msgid "Material Station internal value"
+msgid ""
+"How much material to use to purge the previous material out of the nozzle "
+"(in length of filament) when replacing an empty spool with a fresh spool of "
+"the same material."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2542,7 +2549,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_maximum_park_duration description"
-msgid "Material Station internal value"
+msgid "How long the material can be kept out of dry storage safely."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2552,7 +2559,10 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "material_no_load_move_factor description"
-msgid "Material Station internal value"
+msgid ""
+"A factor indicating how much the filament gets compressed between the feeder "
+"and the nozzle chamber, used to determine how far to move the material for a "
+"filament switch."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3422,8 +3432,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "retraction_enable description"
-msgid ""
-"Retract the filament when the nozzle is moving over a non-printed area. "
+msgid "Retract the filament when the nozzle is moving over a non-printed area."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -4247,7 +4256,7 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "support_xy_distance_overhang description"
 msgid ""
-"Distance of the support structure from the overhang in the X/Y directions. "
+"Distance of the support structure from the overhang in the X/Y directions."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5530,7 +5539,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "meshfix description"
-msgid "category_fixes"
+msgid "Make the meshes more suited for 3D printing."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5687,7 +5696,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "blackmagic description"
-msgid "category_blackmagic"
+msgid "Non-traditional ways to print your models."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5905,7 +5914,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "experimental description"
-msgid "experimental!"
+msgid "Features that haven't completely been fleshed out yet."
 msgstr ""
 
 #: fdmprinter.def.json