diff options
author | nickthetait <tait@alephobjects.com> | 2016-08-26 18:38:02 +0300 |
---|---|---|
committer | nickthetait <tait@alephobjects.com> | 2016-08-26 18:49:27 +0300 |
commit | d319b5f219fd8c0e55ce40188a6313951a080aae (patch) | |
tree | fa15ba65732a40a379caf07a9159d8841079c7bc | |
parent | 171fc33fae39cff1ca60e45fb09f4a7f9ed63956 (diff) |
Update MOARstruder profiles
46 files changed, 91 insertions, 2454 deletions
diff --git a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/high-quality/profile.ini deleted file mode 100644 index 0e82f511e1..0000000000 --- a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/high-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High detail -order = 2 -profile_file = ../../../lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-quality_TAZ5_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/high-speed/profile.ini deleted file mode 100644 index 22b767cbb4..0000000000 --- a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/high-speed/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High speed -order = 1 -profile_file = ../../../lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-speed_TAZ5_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/material.ini deleted file mode 100644 index b3778b4aeb..0000000000 --- a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/material.ini +++ /dev/null @@ -1,8 +0,0 @@ -[info] -name = PCTPE (Taulman) -material_types = Advanced -order = 56 -description = Bed preparation required: - Apply a PVA-based glue stick - to bed surface before printing. -url = lulzbot.com/store/filament/pctpe?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/medium-quality/profile.ini deleted file mode 100644 index 592293bf8d..0000000000 --- a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PCTPE/medium-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = Standard -order = 0 -profile_file = ../../../lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_medium-quality_TAZ5_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PC_VP/high-strength/profile.ini b/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PC_VP/high-strength/profile.ini deleted file mode 100644 index 2187d7e9ce..0000000000 --- a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PC_VP/high-strength/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High strength -order = 4 -profile_file = ../../../lulzbot_profiles/TAZ5_moarstruder_v2/polycarbonate_high-strength_TAZ5_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PC_VP/material.ini b/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PC_VP/material.ini deleted file mode 100644 index d910672dcb..0000000000 --- a/resources/quickprint/lulzbot_TAZ_5_Moarstruder_v2/PC_VP/material.ini +++ /dev/null @@ -1,5 +0,0 @@ -[info] -name = PC (Village Plastics) -material_types = Expert -order = 502 -url = lulzbot.com/store/filament/polycarbonate?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/high-quality/profile.ini deleted file mode 100644 index f0ba57e013..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/high-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High detail -order = 2 -profile_file = ../../../lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-quality_TAZ6_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/high-speed/profile.ini deleted file mode 100644 index 22bc562cdb..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/high-speed/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High speed -order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-speed_TAZ6_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/material.ini deleted file mode 100644 index b3778b4aeb..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/material.ini +++ /dev/null @@ -1,8 +0,0 @@ -[info] -name = PCTPE (Taulman) -material_types = Advanced -order = 56 -description = Bed preparation required: - Apply a PVA-based glue stick - to bed surface before printing. -url = lulzbot.com/store/filament/pctpe?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/medium-quality/profile.ini deleted file mode 100644 index 80e7087efe..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PCTPE/medium-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = Standard -order = 0 -profile_file = ../../../lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_medium-quality_TAZ6_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PC_VP/high-strength/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PC_VP/high-strength/profile.ini deleted file mode 100644 index 643f4f13aa..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PC_VP/high-strength/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High strength -order = 4 -profile_file = ../../../lulzbot_profiles/TAZ6_moarstruder_v2/polycarbonate_high-strength_TAZ6_moarstruder-v2_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PC_VP/material.ini b/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PC_VP/material.ini deleted file mode 100644 index d910672dcb..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Moarstruder_v2/PC_VP/material.ini +++ /dev/null @@ -1,5 +0,0 @@ -[info] -name = PC (Village Plastics) -material_types = Expert -order = 502 -url = lulzbot.com/store/filament/polycarbonate?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-clarity_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-clarity_TAZ5_moarstruder-v2_cura.ini index 00d9ffb4e2..cf62bf21f2 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-clarity_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-clarity_TAZ5_moarstruder-v2_cura.ini @@ -25,8 +25,8 @@ filament_diameter3 = 0 filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 +retraction_speed = 15 +retraction_amount = 3 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -54,7 +54,7 @@ cool_min_feedrate = 7 cool_head_lift = False solid_top = True solid_bottom = True -fill_overlap = 15 +fill_overlap = 0.05 support_type = Lines support_angle = 45 support_fill_rate = 30 diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ5_moarstruder-v2_cura.ini index d9aa3d7a8e..dedabdd115 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ5_moarstruder-v2_cura.ini @@ -33,23 +33,23 @@ retraction_combing = All retraction_minimal_extrusion = 0.005 retraction_hop = 0.1 bottom_thickness = 0.9 -layer0_width_factor = 100 +layer0_width_factor = 115 object_sink = 0 overlap_dual = 0.15 travel_speed = 175 bottom_layer_speed = 12 -infill_speed = 55 -solidarea_speed = 50 -inset0_speed = 45 -insetx_speed = 50 +infill_speed = 40 +solidarea_speed = 40 +inset0_speed = 35 +insetx_speed = 40 cool_min_layer_time = 10 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 100 -fan_speed_max = 100 +fan_full_height = 6 +fan_speed = 30 +fan_speed_max = 60 cool_min_feedrate = 10 cool_head_lift = False solid_top = True diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ5_moarstruder-v2_cura.ini index c738885d36..8f9245a7ba 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ5_moarstruder-v2_cura.ini @@ -33,23 +33,23 @@ retraction_combing = All retraction_minimal_extrusion = 0.005 retraction_hop = 0.1 bottom_thickness = 0.7 -layer0_width_factor = 100 +layer0_width_factor = 110 object_sink = 0 overlap_dual = 0.15 travel_speed = 175 bottom_layer_speed = 12 -infill_speed = 44 +infill_speed = 40 solidarea_speed = 40 -inset0_speed = 35 -insetx_speed = 40 +inset0_speed = 30 +insetx_speed = 35 cool_min_layer_time = 10 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 100 -fan_speed_max = 100 +fan_full_height = 6 +fan_speed = 30 +fan_speed_max = 60 cool_min_feedrate = 10 cool_head_lift = False solid_top = True diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-quality_TAZ5_moarstruder-v2_cura.ini deleted file mode 100644 index e176014744..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-quality_TAZ5_moarstruder-v2_cura.ini +++ /dev/null @@ -1,265 +0,0 @@ -[profile] -layer_height = 0.3 -wall_thickness = 3.6 -retraction_enable = True -solid_layer_thickness = 1.2 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 25 -print_temperature = 0 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 0 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 15 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.5 -layer0_width_factor = 100 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 18 -infill_speed = 30 -solidarea_speed = 25 -inset0_speed = 25 -insetx_speed = 30 -cool_min_layer_time = 10 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 3 -fan_speed_max = 5 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M109 R{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M82 ;set extruder to absolute mode - M107 ;start with the fan off - G28 ;home all axis - G1 Z15.0 F{travel_speed};move the platform down 15mm - G92 E0 ; zero the extruded length - G1 F200 E0 ; extrude 3mm of feed stock - G92 E0 ; zero the extruded length again - G1 F{travel_speed} ; set travel speed - M203 X192 Y208 Z3 ; speed limits - M117 Printing... ; send message to LCD -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position - M84 ; steppers off - G90 ; absolute positioning - M117 TAZ Ready. - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-speed_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-speed_TAZ5_moarstruder-v2_cura.ini deleted file mode 100644 index 2783538985..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_high-speed_TAZ5_moarstruder-v2_cura.ini +++ /dev/null @@ -1,265 +0,0 @@ -[profile] -layer_height = 0.9 -wall_thickness = 2.4 -retraction_enable = True -solid_layer_thickness = 2.7 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 25 -print_temperature = 0 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 0 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 15 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.7 -layer0_width_factor = 100 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 18 -infill_speed = 30 -solidarea_speed = 25 -inset0_speed = 25 -insetx_speed = 30 -cool_min_layer_time = 10 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 3 -fan_speed_max = 5 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M109 R{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M82 ;set extruder to absolute mode - M107 ;start with the fan off - G28 ;home all axis - G1 Z15.0 F{travel_speed};move the platform down 15mm - G92 E0 ; zero the extruded length - G1 F200 E0 ; extrude 3mm of feed stock - G92 E0 ; zero the extruded length again - G1 F{travel_speed} ; set travel speed - M203 X192 Y208 Z3 ; speed limits - M117 Printing... ; send message to LCD -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position - M84 ; steppers off - G90 ; absolute positioning - M117 TAZ Ready. - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_medium-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_medium-quality_TAZ5_moarstruder-v2_cura.ini deleted file mode 100644 index cf6f60030a..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/PCTPE_medium-quality_TAZ5_moarstruder-v2_cura.ini +++ /dev/null @@ -1,265 +0,0 @@ -[profile] -layer_height = 0.7 -wall_thickness = 2.4 -retraction_enable = True -solid_layer_thickness = 2.1 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 25 -print_temperature = 0 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 0 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 15 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.7 -layer0_width_factor = 100 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 18 -infill_speed = 30 -solidarea_speed = 25 -inset0_speed = 25 -insetx_speed = 30 -cool_min_layer_time = 10 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 3 -fan_speed_max = 5 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M109 R{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M82 ;set extruder to absolute mode - M107 ;start with the fan off - G28 ;home all axis - G1 Z15.0 F{travel_speed};move the platform down 15mm - G92 E0 ; zero the extruded length - G1 F200 E0 ; extrude 3mm of feed stock - G92 E0 ; zero the extruded length again - G1 F{travel_speed} ; set travel speed - M203 X192 Y208 Z3 ; speed limits - M117 Printing... ; send message to LCD -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position - M84 ; steppers off - G90 ; absolute positioning - M117 TAZ Ready. - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-quality_TAZ5_moarstruder-v2_cura.ini index 2c852d197a..73cf32b5eb 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-quality_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-quality_TAZ5_moarstruder-v2_cura.ini @@ -26,7 +26,7 @@ filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 retraction_speed = 15 -retraction_amount = 3 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 3 -fan_speed = 5 -fan_speed_max = 10 +fan_speed = 70 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-speed_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-speed_TAZ5_moarstruder-v2_cura.ini index f58fbee4ee..84d1eb7001 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-speed_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_high-speed_TAZ5_moarstruder-v2_cura.ini @@ -26,7 +26,7 @@ filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 retraction_speed = 15 -retraction_amount = 3 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 3 -fan_speed = 5 -fan_speed_max = 10 +fan_speed = 70 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_medium-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_medium-quality_TAZ5_moarstruder-v2_cura.ini index 49d547971b..505416a75c 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_medium-quality_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/alloy910_medium-quality_TAZ5_moarstruder-v2_cura.ini @@ -26,7 +26,7 @@ filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 retraction_speed = 15 -retraction_amount = 3 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 3 -fan_speed = 5 -fan_speed_max = 10 +fan_speed = 70 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/polycarbonate_high-strength_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/polycarbonate_high-strength_TAZ5_moarstruder-v2_cura.ini deleted file mode 100644 index cfdb379f74..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/polycarbonate_high-strength_TAZ5_moarstruder-v2_cura.ini +++ /dev/null @@ -1,266 +0,0 @@ -[profile] -layer_height = .8 -wall_thickness = 2.4 -retraction_enable = True -solid_layer_thickness = 3.2 -fill_density = 60 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 20 -print_temperature = 0 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 0 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = .85 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 10 -infill_speed = 10 -solidarea_speed = 7 -inset0_speed = 7 -insetx_speed = 8 -cool_min_layer_time = 20 -fan_enabled = False -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 6 -fan_speed = 2 -fan_speed_max = 5 -cool_min_feedrate = 7 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M109 R{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M82 ;set extruder to absolute mode - M107 ;start with the fan off - G28 ;home all axis - G1 Z15.0 F{travel_speed};move the platform down 15mm - G92 E0 ; zero the extruded length - G1 F200 E0 ; extrude 3mm of feed stock - G92 E0 ; zero the extruded length again - G1 F{travel_speed} ; set travel speed - M203 X192 Y208 Z3 ; speed limits - M117 Printing... ; send message to LCD -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position - M84 ; steppers off - G90 ; absolute positioning - M117 TAZ Ready. - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - - diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_high-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_high-quality_TAZ5_moarstruder-v2_cura.ini index 8a11bc258e..f1b5b9b1dc 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_high-quality_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_high-quality_TAZ5_moarstruder-v2_cura.ini @@ -2,7 +2,7 @@ layer_height = 0.3 wall_thickness = 2.4 retraction_enable = True -solid_layer_thickness = 0.9 +solid_layer_thickness = 1.5 fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 @@ -25,8 +25,8 @@ filament_diameter3 = 0 filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 -retraction_speed = 25 -retraction_amount = 3 +retraction_speed = 20 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 6 -fan_speed = 20 -fan_speed_max = 80 +fan_speed = 40 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True diff --git a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_medium-quality_TAZ5_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_medium-quality_TAZ5_moarstruder-v2_cura.ini index 703137c4c8..cccd63c31a 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_medium-quality_TAZ5_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ5_moarstruder_v2/t-glase_medium-quality_TAZ5_moarstruder-v2_cura.ini @@ -25,8 +25,8 @@ filament_diameter3 = 0 filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 -retraction_speed = 25 -retraction_amount = 3 +retraction_speed = 20 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-quality_TAZ6_moarstruder-v2_cura.ini index 8086677efe..e100edba4e 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-quality_TAZ6_moarstruder-v2_cura.ini @@ -3,7 +3,7 @@ layer_height = 0.3 wall_thickness = 2.4 retraction_enable = True solid_layer_thickness = 1.2 -fill_density = 40 +fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-speed_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-speed_TAZ6_moarstruder-v2_cura.ini index c59bd86c71..32a6ad1c55 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-speed_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_high-speed_TAZ6_moarstruder-v2_cura.ini @@ -3,7 +3,7 @@ layer_height = 0.9 wall_thickness = 2.4 retraction_enable = True solid_layer_thickness = 1.8 -fill_density = 40 +fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_medium-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_medium-quality_TAZ6_moarstruder-v2_cura.ini index 6ece1e873c..d0cba97902 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_medium-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/ABS_medium-quality_TAZ6_moarstruder-v2_cura.ini @@ -3,7 +3,7 @@ layer_height = 0.7 wall_thickness = 2.4 retraction_enable = True solid_layer_thickness = 2.1 -fill_density = 40 +fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ6_moarstruder-v2_cura.ini index 6513b6c9ac..d4d794f4bc 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-speed_TAZ6_moarstruder-v2_cura.ini @@ -109,7 +109,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-19 Y258 F1000 ; move to safe homing position M109 S170 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-strength_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-strength_TAZ6_moarstruder-v2_cura.ini index 9d7e1a6c5d..cb5c170961 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-strength_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_high-strength_TAZ6_moarstruder-v2_cura.ini @@ -109,7 +109,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-19 Y258 F1000 ; move to safe homing position M109 S170 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ6_moarstruder-v2_cura.ini index 8cbc2bfcd7..cce1052017 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_medium-quality_TAZ6_moarstruder-v2_cura.ini @@ -109,7 +109,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-19 Y258 F1000 ; move to safe homing position M109 S170 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_spiral-vase_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_spiral-vase_TAZ6_moarstruder-v2_cura.ini index 4daccda676..8acf744e79 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_spiral-vase_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/CS-INOVA-1800_spiral-vase_TAZ6_moarstruder-v2_cura.ini @@ -109,7 +109,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-19 Y258 F1000 ; move to safe homing position M109 S170 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-quality_TAZ6_moarstruder-v2_cura.ini deleted file mode 100644 index 296d4ae73a..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-quality_TAZ6_moarstruder-v2_cura.ini +++ /dev/null @@ -1,312 +0,0 @@ -[profile] -layer_height = 0.3 -wall_thickness = 3.6 -retraction_enable = True -solid_layer_thickness = 1.2 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 25 -print_temperature = 235 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 100 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 15 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.5 -layer0_width_factor = 100 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 18 -infill_speed = 30 -solidarea_speed = 25 -inset0_speed = 25 -insetx_speed = 30 -cool_min_layer_time = 10 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 3 -fan_speed_max = 5 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printer - ;Basic slice data: - ;Sliced at: {day} {date} {time} - ;Layer height: {layer_height} - ;Walls: {wall_thickness} - ;Fill: {fill_density} - ;Estimated Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - G26 ; clear potential 'probe fail' condition - G21 ; set units to Millimetres - M107 ; disable fans - G90 ; absolute positioning - M82 ; set extruder to absolute mode - G92 E0 ; set extruder position to 0 - M907 E106 ; set appropriate extruder torque - M140 S{print_bed_temperature}; get bed heating up - G28 XY ; home X and Y - G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing - G28 Z ; home Z - M104 S185 ; wipe temp - G1 E-30 F100 ; suck up XXmm of filament - G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z1 ; push nozzle into wiper - G1 X-17 Y95 F1000 ; slow wipe - G1 X-17 Y90 F1000 ; slow wipe - G1 X-17 Y85 F1000 ; slow wipe - G1 X-15 Y90 F1000 ; slow wipe - G1 X-17 Y80 F1000 ; slow wipe - G1 X-15 Y95 F1000 ; slow wipe - G1 X-17 Y75 F2000 ; fast wipe - G1 X-15 Y65 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y60 F2000 ; fast wipe - G1 X-17 Y55 F2000 ; fast wipe - G1 X-15 Y50 F2000 ; fast wipe - G1 X-17 Y40 F2000 ; fast wipe - G1 X-15 Y45 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y40 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y30 Z2 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y25 F2000 ; fast wipe - G1 X-17 Y30 F2000 ; fast wipe - G1 X-15 Y25 Z1.5 F1000 ; slow wipe - G1 X-17 Y23 F1000 ; slow wipe - G1 Z10 ; raise extruder - M109 S185 ; heat to probe temp - G1 X-9 Y-9 ; move above probe - M204 S100 ; set accel for probing - G29 ; probe sequence (for auto-leveling) - M204 S250 ; set accel back to normal - G1 X0 Y0 Z15 F5000 ; get out the way - M400 ; clear buffer - G4 S1 ; pause - M117 Heating... ; LCD status message - M140 S{print_bed_temperature}; get bed heating up - M109 S{print_temperature} ; set extruder temp and wait - M190 S{print_bed_temperature}; get bed temping up during first layer - G1 Z2 E0 F75 ; extrude filament back into nozzle - M117 TAZ Printing... ; LCD status message -end.gcode = ; - M400 ; wait for moves to finish - M104 S0 ; hotend off - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - M117 Cooling please wait ; progress indicator message - G90 ; absolute positioning - G1 Y0 F3000 ; move to cooling position - M190 S50 ; set bed to cool off - G1 Y280 F3000 ; present finished print - M84 ; steppers off - G90 ; absolute positioning - M117 Print complete ; progress indicator message - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-speed_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-speed_TAZ6_moarstruder-v2_cura.ini deleted file mode 100644 index 4d5f1f4eac..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_high-speed_TAZ6_moarstruder-v2_cura.ini +++ /dev/null @@ -1,312 +0,0 @@ -[profile] -layer_height = 0.9 -wall_thickness = 2.4 -retraction_enable = True -solid_layer_thickness = 2.7 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 25 -print_temperature = 235 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 100 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 15 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.7 -layer0_width_factor = 100 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 18 -infill_speed = 30 -solidarea_speed = 25 -inset0_speed = 25 -insetx_speed = 30 -cool_min_layer_time = 10 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 3 -fan_speed_max = 5 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printer - ;Basic slice data: - ;Sliced at: {day} {date} {time} - ;Layer height: {layer_height} - ;Walls: {wall_thickness} - ;Fill: {fill_density} - ;Estimated Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - G26 ; clear potential 'probe fail' condition - G21 ; set units to Millimetres - M107 ; disable fans - G90 ; absolute positioning - M82 ; set extruder to absolute mode - G92 E0 ; set extruder position to 0 - M907 E106 ; set appropriate extruder torque - M140 S{print_bed_temperature}; get bed heating up - G28 XY ; home X and Y - G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing - G28 Z ; home Z - M104 S185 ; wipe temp - G1 E-30 F100 ; suck up XXmm of filament - G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z1 ; push nozzle into wiper - G1 X-17 Y95 F1000 ; slow wipe - G1 X-17 Y90 F1000 ; slow wipe - G1 X-17 Y85 F1000 ; slow wipe - G1 X-15 Y90 F1000 ; slow wipe - G1 X-17 Y80 F1000 ; slow wipe - G1 X-15 Y95 F1000 ; slow wipe - G1 X-17 Y75 F2000 ; fast wipe - G1 X-15 Y65 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y60 F2000 ; fast wipe - G1 X-17 Y55 F2000 ; fast wipe - G1 X-15 Y50 F2000 ; fast wipe - G1 X-17 Y40 F2000 ; fast wipe - G1 X-15 Y45 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y40 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y30 Z2 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y25 F2000 ; fast wipe - G1 X-17 Y30 F2000 ; fast wipe - G1 X-15 Y25 Z1.5 F1000 ; slow wipe - G1 X-17 Y23 F1000 ; slow wipe - G1 Z10 ; raise extruder - M109 S185 ; heat to probe temp - G1 X-9 Y-9 ; move above probe - M204 S100 ; set accel for probing - G29 ; probe sequence (for auto-leveling) - M204 S250 ; set accel back to normal - G1 X0 Y0 Z15 F5000 ; get out the way - M400 ; clear buffer - G4 S1 ; pause - M117 Heating... ; LCD status message - M140 S{print_bed_temperature}; get bed heating up - M109 S{print_temperature} ; set extruder temp and wait - M190 S{print_bed_temperature}; get bed temping up during first layer - G1 Z2 E0 F75 ; extrude filament back into nozzle - M117 TAZ Printing... ; LCD status message -end.gcode = ; - M400 ; wait for moves to finish - M104 S0 ; hotend off - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - M117 Cooling please wait ; progress indicator message - G90 ; absolute positioning - G1 Y0 F3000 ; move to cooling position - M190 S50 ; set bed to cool off - G1 Y280 F3000 ; present finished print - M84 ; steppers off - G90 ; absolute positioning - M117 Print complete ; progress indicator message - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_medium-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_medium-quality_TAZ6_moarstruder-v2_cura.ini deleted file mode 100644 index ce8ab22d38..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/PCTPE_medium-quality_TAZ6_moarstruder-v2_cura.ini +++ /dev/null @@ -1,312 +0,0 @@ -[profile] -layer_height = 0.7 -wall_thickness = 2.4 -retraction_enable = True -solid_layer_thickness = 2.1 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 25 -print_temperature = 235 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 100 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 15 -retraction_amount = 3 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.7 -layer0_width_factor = 100 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 18 -infill_speed = 30 -solidarea_speed = 25 -inset0_speed = 25 -insetx_speed = 30 -cool_min_layer_time = 10 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 3 -fan_speed_max = 5 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printer - ;Basic slice data: - ;Sliced at: {day} {date} {time} - ;Layer height: {layer_height} - ;Walls: {wall_thickness} - ;Fill: {fill_density} - ;Estimated Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - G26 ; clear potential 'probe fail' condition - G21 ; set units to Millimetres - M107 ; disable fans - G90 ; absolute positioning - M82 ; set extruder to absolute mode - G92 E0 ; set extruder position to 0 - M907 E106 ; set appropriate extruder torque - M140 S{print_bed_temperature}; get bed heating up - G28 XY ; home X and Y - G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing - G28 Z ; home Z - M104 S185 ; wipe temp - G1 E-30 F100 ; suck up XXmm of filament - G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z1 ; push nozzle into wiper - G1 X-17 Y95 F1000 ; slow wipe - G1 X-17 Y90 F1000 ; slow wipe - G1 X-17 Y85 F1000 ; slow wipe - G1 X-15 Y90 F1000 ; slow wipe - G1 X-17 Y80 F1000 ; slow wipe - G1 X-15 Y95 F1000 ; slow wipe - G1 X-17 Y75 F2000 ; fast wipe - G1 X-15 Y65 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y60 F2000 ; fast wipe - G1 X-17 Y55 F2000 ; fast wipe - G1 X-15 Y50 F2000 ; fast wipe - G1 X-17 Y40 F2000 ; fast wipe - G1 X-15 Y45 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y40 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y30 Z2 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y25 F2000 ; fast wipe - G1 X-17 Y30 F2000 ; fast wipe - G1 X-15 Y25 Z1.5 F1000 ; slow wipe - G1 X-17 Y23 F1000 ; slow wipe - G1 Z10 ; raise extruder - M109 S185 ; heat to probe temp - G1 X-9 Y-9 ; move above probe - M204 S100 ; set accel for probing - G29 ; probe sequence (for auto-leveling) - M204 S250 ; set accel back to normal - G1 X0 Y0 Z15 F5000 ; get out the way - M400 ; clear buffer - G4 S1 ; pause - M117 Heating... ; LCD status message - M140 S{print_bed_temperature}; get bed heating up - M109 S{print_temperature} ; set extruder temp and wait - M190 S{print_bed_temperature}; get bed temping up during first layer - G1 Z2 E0 F75 ; extrude filament back into nozzle - M117 TAZ Printing... ; LCD status message -end.gcode = ; - M400 ; wait for moves to finish - M104 S0 ; hotend off - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - M117 Cooling please wait ; progress indicator message - G90 ; absolute positioning - G1 Y0 F3000 ; move to cooling position - M190 S50 ; set bed to cool off - G1 Y280 F3000 ; present finished print - M84 ; steppers off - G90 ; absolute positioning - M117 Print complete ; progress indicator message - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-quality_TAZ6_moarstruder-v2_cura.ini index 62771556d1..ab1ada314a 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-quality_TAZ6_moarstruder-v2_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 -print_temperature = 250 +print_temperature = 245 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -26,7 +26,7 @@ filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 retraction_speed = 15 -retraction_amount = 3 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 3 -fan_speed = 5 -fan_speed_max = 10 +fan_speed = 70 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -107,10 +107,11 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing - G28 Z ; home Z - M104 S185 ; wipe temp + M109 S140 ; soften filament for z homing G1 E-30 F100 ; suck up XXmm of filament + M109 S205 ; z-home temp + G28 Z ; home Z + M109 S190 ; wipe temp G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe @@ -137,7 +138,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S185 ; heat to probe temp + M109 S190 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-speed_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-speed_TAZ6_moarstruder-v2_cura.ini index 2535b53aa2..21b590e330 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-speed_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_high-speed_TAZ6_moarstruder-v2_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 -print_temperature = 250 +print_temperature = 245 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -26,7 +26,7 @@ filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 retraction_speed = 15 -retraction_amount = 3 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 3 -fan_speed = 5 -fan_speed_max = 10 +fan_speed = 70 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -107,10 +107,11 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing - G28 Z ; home Z - M104 S185 ; wipe temp + M109 S140 ; soften filament for z homing G1 E-30 F100 ; suck up XXmm of filament + M109 S205 ; z-home temp + G28 Z ; home Z + M109 S190 ; wipe temp G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe @@ -137,7 +138,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S185 ; heat to probe temp + M109 S190 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_medium-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_medium-quality_TAZ6_moarstruder-v2_cura.ini index 7c764cd939..3bfe6d3932 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_medium-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/alloy910_medium-quality_TAZ6_moarstruder-v2_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 -print_temperature = 250 +print_temperature = 245 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -26,7 +26,7 @@ filament_diameter4 = 0 filament_diameter5 = 0 filament_flow = 100.0 retraction_speed = 15 -retraction_amount = 3 +retraction_amount = 4 retraction_dual_amount = 16.5 retraction_min_travel = 1.5 retraction_combing = All @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 3 -fan_speed = 5 -fan_speed_max = 10 +fan_speed = 70 +fan_speed_max = 90 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -107,10 +107,11 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing - G28 Z ; home Z - M104 S185 ; wipe temp + M109 S140 ; soften filament for z homing G1 E-30 F100 ; suck up XXmm of filament + M109 S205 ; z-home temp + G28 Z ; home Z + M109 S190 ; wipe temp G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe @@ -137,7 +138,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S185 ; heat to probe temp + M109 S190 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polycarbonate_high-strength_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polycarbonate_high-strength_TAZ6_moarstruder-v2_cura.ini deleted file mode 100644 index 00828b2aea..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polycarbonate_high-strength_TAZ6_moarstruder-v2_cura.ini +++ /dev/null @@ -1,311 +0,0 @@ -[profile] -layer_height = .8 -wall_thickness = 2.4 -retraction_enable = True -solid_layer_thickness = 3.2 -fill_density = 60 -perimeter_before_infill = True -nozzle_size = 1.2 -print_speed = 20 -print_temperature = 250 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 110 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = .85 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 10 -infill_speed = 10 -solidarea_speed = 7 -inset0_speed = 7 -insetx_speed = 8 -cool_min_layer_time = 20 -fan_enabled = False -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 6 -fan_speed = 2 -fan_speed_max = 5 -cool_min_feedrate = 7 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 2.5 -support_z_distance = .15 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printer - ;Basic slice data: - ;Sliced at: {day} {date} {time} - ;Layer height: {layer_height} - ;Walls: {wall_thickness} - ;Fill: {fill_density} - ;Estimated Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - G26 ; clear potential 'probe fail' condition - G21 ; set units to Millimetres - M107 ; disable fans - G90 ; absolute positioning - M82 ; set extruder to absolute mode - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 XY ; home X and Y - G1 X-19 Y258 F1000 ; move to safe homing position - M109 S190 ; soften filament for z homing - G28 Z ; home Z - M104 S200 ; wipe temp - G1 E-30 F100 ; suck up XXmm of filament - G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z1 ; push nozzle into wiper - G1 X-17 Y95 F1000 ; slow wipe - G1 X-17 Y90 F1000 ; slow wipe - G1 X-17 Y85 F1000 ; slow wipe - G1 X-15 Y90 F1000 ; slow wipe - G1 X-17 Y80 F1000 ; slow wipe - G1 X-15 Y95 F1000 ; slow wipe - G1 X-17 Y75 F2000 ; fast wipe - G1 X-15 Y65 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y60 F2000 ; fast wipe - G1 X-17 Y55 F2000 ; fast wipe - G1 X-15 Y50 F2000 ; fast wipe - G1 X-17 Y40 F2000 ; fast wipe - G1 X-15 Y45 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y40 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y30 Z2 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y25 F2000 ; fast wipe - G1 X-17 Y30 F2000 ; fast wipe - G1 X-15 Y25 Z1.5 F1000 ; slow wipe - G1 X-17 Y23 F1000 ; slow wipe - G1 Z10 ; raise extruder - M109 S200 ; heat to probe temp - G1 X-9 Y-9 ; move above probe - M204 S100 ; set accel for probing - G29 ; probe sequence (for auto-leveling) - M204 S500 ; set accel back to normal - G1 X0 Y0 Z15 F5000 ; get out the way - M400 ; clear buffer - G4 S1 ; pause - M117 Heating... ; LCD status message - M140 S{print_bed_temperature}; get bed heating up - M109 S{print_temperature} ; set extruder temp and wait - M190 S{print_bed_temperature}; get bed temping up during first layer - G1 Z2 E0 F75 ; extrude filament back into nozzle - M117 TAZ Printing... ; LCD status message -end.gcode = ; - M400 ; wait for moves to finish - M104 S0 ; hotend off - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - M117 Cooling please wait ; progress indicator message - G90 ; absolute positioning - G1 Y0 F3000 ; move to cooling position - M190 S50 ; set bed to cool off - G1 Y280 F3000 ; present finished print - M84 ; steppers off - G90 ; absolute positioning - M117 Print complete ; progress indicator message - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-quality_TAZ6_moarstruder-v2_cura.ini index d944905c93..b7ee1d6dfa 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-quality_TAZ6_moarstruder-v2_cura.ini @@ -107,9 +107,9 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing + M109 S155 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper @@ -137,7 +137,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S180 ; heat to probe temp + M109 S170 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-speed_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-speed_TAZ6_moarstruder-v2_cura.ini index bb8e7d125a..8aa624f7c0 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-speed_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-speed_TAZ6_moarstruder-v2_cura.ini @@ -107,9 +107,9 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing + M109 S155 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper @@ -137,7 +137,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S180 ; heat to probe temp + M109 S170 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-strength_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-strength_TAZ6_moarstruder-v2_cura.ini index 6d09229892..5190030ee7 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-strength_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_high-strength_TAZ6_moarstruder-v2_cura.ini @@ -12,7 +12,7 @@ print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 print_temperature5 = 0 -print_bed_temperature = 100 +print_bed_temperature = 110 support = None platform_adhesion = None support_dual_extrusion = Both @@ -107,9 +107,9 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing + M109 S155 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper @@ -137,7 +137,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S180 ; heat to probe temp + M109 S170 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_medium-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_medium-quality_TAZ6_moarstruder-v2_cura.ini index c2d39bdfc4..140a358977 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_medium-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_medium-quality_TAZ6_moarstruder-v2_cura.ini @@ -107,9 +107,9 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing + M109 S155 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper @@ -137,7 +137,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S180 ; heat to probe temp + M109 S170 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_spiral-vase_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_spiral-vase_TAZ6_moarstruder-v2_cura.ini index 40fca5f7c8..2c327d3682 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_spiral-vase_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/polymaker-PC-MAX_spiral-vase_TAZ6_moarstruder-v2_cura.ini @@ -107,9 +107,9 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe M140 S{print_bed_temperature}; get bed heating up G28 XY ; home X and Y G1 X-19 Y258 F1000 ; move to safe homing position - M109 S170 ; soften filament for z homing + M109 S155 ; soften filament for z homing G28 Z ; home Z - M104 S180 ; wipe temp + M104 S170 ; wipe temp G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad G1 Z1 ; push nozzle into wiper @@ -137,7 +137,7 @@ start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - M109 S180 ; heat to probe temp + M109 S170 ; heat to probe temp G1 X-9 Y-9 ; move above probe M204 S100 ; set accel for probing G29 ; probe sequence (for auto-leveling) diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-quality_TAZ6_moarstruder-v2_cura.ini index 7101b72513..cb07687e86 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-quality_TAZ6_moarstruder-v2_cura.ini @@ -2,12 +2,12 @@ layer_height = 0.3 wall_thickness = 2.4 retraction_enable = True -solid_layer_thickness = 0.9 +solid_layer_thickness = 1.8 fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 -print_temperature = 215 +print_temperature = 230 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -48,7 +48,7 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 6 -fan_speed = 20 +fan_speed = 40 fan_speed_max = 80 cool_min_feedrate = 10 cool_head_lift = False diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-speed_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-speed_TAZ6_moarstruder-v2_cura.ini index 2785f40f9a..3090fa4b0a 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-speed_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_high-speed_TAZ6_moarstruder-v2_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 -print_temperature = 225 +print_temperature = 230 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -48,7 +48,7 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 6 -fan_speed = 20 +fan_speed = 40 fan_speed_max = 80 cool_min_feedrate = 10 cool_head_lift = False diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_medium-quality_TAZ6_moarstruder-v2_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_medium-quality_TAZ6_moarstruder-v2_cura.ini index d039804344..3633b88cc6 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_medium-quality_TAZ6_moarstruder-v2_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_moarstruder_v2/t-glase_medium-quality_TAZ6_moarstruder-v2_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 1.2 print_speed = 25 -print_temperature = 220 +print_temperature = 230 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -48,7 +48,7 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 6 -fan_speed = 20 +fan_speed = 40 fan_speed_max = 80 cool_min_feedrate = 10 cool_head_lift = False |