remove specific initial layer bed temperature

Forgot to remove an initial layer setting. PP-42

45 files changed, 0 insertions, 45 deletions

diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
index 10f6b3ab68..9a30ad71bd 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -20,7 +20,6 @@ cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
index 866e75a703..a2e6e5e86a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@@ -25,7 +25,6 @@ layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
index 1a07585f8b..bec4a32c6d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@@ -25,7 +25,6 @@ layer_height = 0.15
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 12
 material_initial_print_temperature = =material_print_temperature - 2
 material_print_temperature = =default_material_print_temperature - 13
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
index 44ef5cad73..f665bad106 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -24,7 +24,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index cb0d1ca67d..f55ca31b1e 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index 7fd42ccdc8..71d6d72525 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index c9bf4eee3d..7bfa548002 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 layer_height = 0.3
-material_bed_temperature_layer_0 = =material_bed_temperature
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
index 449b03bd4b..7cb833c4fb 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -20,7 +20,6 @@ cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index 78b3899c1c..fcccbb7822 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index 88a38bfc2c..d3d5fa432d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -23,7 +23,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 12
 material_initial_print_temperature = =material_print_temperature - 2
 material_print_temperature = =default_material_print_temperature - 13
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 511c827b2b..75605e851a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -23,7 +23,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index e49e150000..eb174a4f02 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index 5c22e8006d..817bdf4b3c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -16,7 +16,6 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index d8e40f925e..25a2ca571d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -16,7 +16,6 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
index b5e8ebc2a7..910ac6aba8 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
index 5ed8c2b4bf..5c47cb2f7f 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
index 824ca892e5..b3c2ff1651 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
index cb23ca82c0..644c7d88fa 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
index 8c6763a6b2..80b0ea88a4 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 618c5493ee..6550be6809 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
index 43669626b0..f9d2cc3021 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
index f676c14b58..b57d1bbe69 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
index b8734796f8..b51b1d11a8 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
index 09dbea2d1c..270b3f31a9 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
index ed9643e6b3..7fed4541c4 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
index ce3543957a..9ef1840f02 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index d01599008b..fd061d3cdc 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -20,7 +20,6 @@ cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 7996fd227f..9747742c87 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index f89ce709f2..2b4373e5c6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -23,7 +23,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 12
 material_initial_print_temperature = =material_print_temperature - 2
 material_print_temperature = =default_material_print_temperature - 13
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 86884258ef..6c7a4afe1d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -23,7 +23,6 @@ infill_wipe_dist = 0.1
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index e188e6ea07..4ab569df51 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index deeac6ebaf..0def2f48f7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -16,7 +16,6 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 4187507299..c0df85c64a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -16,7 +16,6 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
-material_bed_temperature_layer_0 = =material_bed_temperature
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
index 7e3c2f6c6a..44c86a6bac 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
index 935c04f958..3fbdba351a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
index 5f68f86740..91294dfc61 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
index f7328a406a..519522714d 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
index 92b3953ea4..5d9207a80b 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 4ebdf0635c..614b01500a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
index ddf9ba9c4a..57d55d1986 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
index 9e61b75636..82b9c68b93 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
index f4212047a6..f5b810ac65 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
index f379d2ff2d..64b0fd615a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
index 9721433039..03f7e23870 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
index 067d0146fb..30eac47f51 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2