diff options
author | p.kuiper <p.kuiper@ultimaker.com> | 2021-10-11 12:35:38 +0300 |
---|---|---|
committer | p.kuiper <p.kuiper@ultimaker.com> | 2021-10-11 12:35:38 +0300 |
commit | 6c67b03a5566909f1ab63a878a3eed130cfac250 (patch) | |
tree | 48b42388f5f1fe945f5c677e10a60bb96ca5bf84 | |
parent | 730fb72f78db55442fbd67e4dd62b0ee1f141eea (diff) |
- Reverted the print profiles to changes agreed by the Print Profile CCB from 06-10-2021 14:00-15:00
66 files changed, 85 insertions, 209 deletions
diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index c028363239..4ade59985f 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -86,6 +86,19 @@ }, "machine_acceleration": { "default_value": 3000 + }, + "infill_before_walls": { + "value": false + }, + "retraction_combing": { + "value": "no_outer_surfaces", + "default_value": "no_outer_surfaces" + }, + "skin_monotonic" : { + "value": true + }, + "top_bottom_pattern" : { + "value": "zigzag" } } } diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index cf4d5fd7ff..01a54426fa 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -96,20 +96,30 @@ "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "infill_before_walls": { "value": false }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'lines'" }, + "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, - "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, - "jerk_print": { "value": "25" }, - "jerk_support": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, - "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "max(math.ceil(jerk_print * 5 / 25), 20)" }, - "jerk_wall": { "value": "max(math.ceil(jerk_print * 10 / 25), 20" }, - "jerk_wall_0": { "value": "max(math.ceil(jerk_wall * 5 / 10), 20)" }, + "jerk_print": { "value": "20", "minimum_value": 20 }, + "jerk_infill": {"minimum_value": 20 }, + "jerk_wall": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_wall_0": { "value": "jerk_wall", "minimum_value": 20 }, + "jerk_roofing": {"minimum_value": 20 }, + "jerk_topbottom": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_support": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_support_infill": {"minimum_value": 20 }, + "jerk_support_interface": { "value": "jerk_topbottom", "minimum_value": 20 }, + "jerk_support_roof": {"minimum_value": 20 }, + "jerk_support_bottom": {"minimum_value": 20 }, + "jerk_prime_tower": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_travel": {"minimum_value": 20 }, + "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value": 20}, + "jerk_print_layer_0": {"minimum_value": 20 }, + "jerk_travel_layer_0": {"minimum_value": 20 }, + "jerk_skirt_brim": {"minimum_value": 20 }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, @@ -132,6 +142,7 @@ "raft_margin": { "value": "10" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, + "retraction_combing": { "value": "no_outer_surfaces", "default_value": "no_outer_surfaces" }, "retraction_count_max": { "value": "10" }, "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, @@ -161,10 +172,7 @@ "switch_extruder_retraction_amount": { "value": "8" }, "top_bottom_pattern" : {"value": "zigzag"}, "top_bottom_thickness": { "value": "1" }, - "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" }, - "wall_material_flow": {"value": "90"}, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, - "retraction_combing": { "value": "no_outer_surfaces", "default_value": "no_outer_surfaces" }, "wall_0_inset": { "value": "0" }, "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" }, "wall_thickness": { "value": "1" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index e0545dda65..cd5746fe43 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -89,19 +89,29 @@ "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "infill_before_walls": { "value": false }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'lines'" }, + "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, - "jerk_enabled": { "value": "False" }, - "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, - "jerk_print": { "value": "25" }, - "jerk_support": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, - "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "max(math.ceil(jerk_print * 5 / 25), 20)" }, - "jerk_wall": { "value": "max(math.ceil(jerk_print * 10 / 25), 20)" }, - "jerk_wall_0": { "value": "max(math.ceil(jerk_wall * 5 / 10), 20)" }, + "jerk_enabled": { "value": "True" }, + "jerk_print": { "value": "20", "minimum_value": 20 }, + "jerk_infill": {"minimum_value": 20 }, + "jerk_wall": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_wall_0": { "value": "jerk_wall", "minimum_value": 20 }, + "jerk_roofing": {"minimum_value": 20 }, + "jerk_topbottom": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_support": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_support_infill": {"minimum_value": 20 }, + "jerk_support_interface": { "value": "jerk_topbottom", "minimum_value": 20 }, + "jerk_support_roof": {"minimum_value": 20 }, + "jerk_support_bottom": {"minimum_value": 20 }, + "jerk_prime_tower": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_travel": {"minimum_value": 20 }, + "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value": 20}, + "jerk_print_layer_0": {"minimum_value": 20 }, + "jerk_travel_layer_0": {"minimum_value": 20 }, + "jerk_skirt_brim": {"minimum_value": 20 }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, @@ -123,6 +133,7 @@ "raft_speed": { "value": "25" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "6.5" }, + "retraction_combing": { "value": "no_outer_surfaces", "default_value": "no_outer_surfaces" }, "retraction_count_max": { "value": "10" }, "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, @@ -130,9 +141,7 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, - "skin_monotonic" : { "value": "False" }, - "roofing_layer_count": {"value": "1"}, - "roofing_monotonic": {"value": "True"}, + "skin_monotonic" : { "value": true }, "skin_overlap": { "value": "10" }, "speed_equalize_flow_enabled": { "value": "True" }, "speed_layer_0": { "value": "20" }, @@ -159,11 +168,9 @@ "wall_0_inset": { "value": "0" }, "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" }, "wall_thickness": { "value": "1" }, - "wall_material_flow": {"value": "90"}, - "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" }, + "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, "optimize_wall_printing_order": { "value": "True" }, - "retraction_combing": { "value": "no_outer_surfaces", "default_value": "no_outer_surfaces" }, "initial_layer_line_width_factor": { "value": "120" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" } } diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index e2149019e0..d851238466 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -91,20 +91,29 @@ "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, + "infill_before_walls": { "value": false }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'lines'" }, + "infill_pattern": { "value": "'triangles'" }, "infill_wipe_dist": { "value": "0" }, - "infill_before_walls": { "value": "False" }, "jerk_enabled": { "value": "True" }, - "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, - "jerk_print": { "value": "25" }, - "jerk_support": { "value": "max(math.ceil(jerk_print * 15 / 25), 20)" }, - "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "max(math.ceil(jerk_print * 5 / 25), 20)" }, - "jerk_wall": { "value": "max(math.ceil(jerk_print * 10 / 25), 20)" }, - "jerk_wall_0": { "value": "max(math.ceil(jerk_wall * 5 / 10), 20)" }, + "jerk_print": { "value": "20", "minimum_value": 20 }, + "jerk_infill": {"minimum_value": 20 }, + "jerk_wall": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_wall_0": { "value": "jerk_wall", "minimum_value": 20 }, + "jerk_roofing": {"minimum_value": 20 }, + "jerk_topbottom": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_support": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_support_infill": {"minimum_value": 20 }, + "jerk_support_interface": { "value": "jerk_topbottom", "minimum_value": 20 }, + "jerk_support_roof": {"minimum_value": 20 }, + "jerk_support_bottom": {"minimum_value": 20 }, + "jerk_prime_tower": { "value": "jerk_print", "minimum_value": 20 }, + "jerk_travel": {"minimum_value": 20 }, + "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value": 20}, + "jerk_print_layer_0": {"minimum_value": 20 }, + "jerk_travel_layer_0": {"minimum_value": 20 }, + "jerk_skirt_brim": {"minimum_value": 20 }, "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, @@ -133,9 +142,7 @@ "retraction_hop_only_when_collides": { "value": "True" }, "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, - "skin_monotonic" : { "value": "False" }, - "roofing_layer_count": {"value": "1"}, - "roofing_monotonic": {"value": "True"}, + "skin_monotonic" : { "value": true }, "skin_overlap": { "value": "10" }, "speed_equalize_flow_enabled": { "value": "True" }, "speed_layer_0": { "value": "20" }, @@ -162,8 +169,7 @@ "wall_0_inset": { "value": "0" }, "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" }, "wall_thickness": { "value": "1" }, - "wall_material_flow": {"value": "90"}, - "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 150" }, + "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" }, "meshfix_maximum_deviation": { "value": "layer_height / 4" }, "optimize_wall_printing_order": { "value": "True" }, "retraction_combing": { "value": "no_outer_surfaces", "default_value": "no_outer_surfaces" }, diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index 5693df306b..44a4ae7897 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -32,5 +32,3 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index c5eaa6c3ac..8c753ef948 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -32,5 +32,3 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 8e6172d8f7..9b6104da25 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index 61ec77d72a..a1e3e05ba5 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index 53188692b8..0804f60436 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index ac741853e6..c2bafc30c6 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index 732ad0905f..8844a15e45 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index 29f455e65a..52fe55ed0a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg index 67db5395f7..d5093dd2b7 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index d689a603d8..bd329948f8 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -32,5 +32,4 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width
wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index a450339861..53bfb3b116 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 64221bedb3..799fab36e0 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 5c2cac232c..1b404665d4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -32,5 +32,3 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index 696fe7ec36..74aabdaf9c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -32,5 +32,3 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 3bcb262450..195a57b041 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -32,5 +32,3 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index 6465503406..402ffb8a51 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -32,5 +32,3 @@ top_bottom_thickness = =wall_thickness wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index b45bb53995..9536c24b86 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 8232526ea7..faa957ddea 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index ca9ad0d849..0bcba30cf2 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index afef4e80d5..cb601ff61e 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index d1dda124bd..a9dd2e0863 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index d3aae5d932..81424cb862 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index 68a6dbec13..b1a2905659 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index 8822d01402..853307f093 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg index 579d450696..a4f9cafae9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -33,5 +33,4 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index 4aa2d5a49f..d49a121334 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -34,5 +34,3 @@ wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index e36a2d4737..a06922a0d1 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -34,5 +34,3 @@ wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index d5dfc07b2b..b4a7b7e3ac 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -34,5 +34,3 @@ wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
-infill_pattern = 'triangles'
-wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 4e3fc3de3f..3d6336fce5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -33,6 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index 940a0d4e55..3c1bd032af 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -33,6 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 5a59c962da..c0ddc08d88 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -33,6 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index 99e09d51be..1809422b15 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -33,6 +33,3 @@ wall_line_width_x = =line_width wall_thickness = =line_width * 3 xy_offset = =-layer_height * 0.2 xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - -infill_pattern = 'triangles' -wall_material_flow = 100
\ No newline at end of file diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index c17eac097d..87f432b80a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index a9082464e0..042eb806be 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 8e60621c5d..3a61f887ee 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.3 material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index e9dd9ba255..df1f349d7e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -20,9 +20,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 2a25221203..7783a639f3 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -20,9 +20,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.4 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index dad835a0c9..fcbbf61e64 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -20,9 +20,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.3 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index d4f54922d3..04568434bd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 8257a7f854..fc42b6fbd6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 566e79dfc7..b4c6cfdf02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 4930036a4e..2afe0ec9cb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -18,9 +18,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index b54ae49d6d..222f356e8b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -19,9 +19,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index dda18519b5..272e8f50b4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -19,9 +19,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index bdb28c8633..6fc530d8da 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 3d7b1c1147..5a8a47212d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 5cacedaf49..f1cc5604f3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index bb5f8b1fb2..ffc21e7071 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -18,9 +18,6 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index d83ef48e5a..6ed2dd23e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -19,9 +19,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 180f28db6d..834230cc59 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -19,9 +19,6 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index f3f19887b3..cb8b95b0fb 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -23,9 +23,6 @@ infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 200 layer_height = 0.2 line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 4a48d7f830..6aed23623a 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -25,11 +25,7 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) -jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) -jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 5f2409965f..a60190d2ff 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -15,10 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) -jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) -jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index f66e83e611..5a1259fc35 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -23,9 +23,6 @@ infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 20) layer_height = 0.2 line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 3c45cd355c..df1c09633b 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -25,11 +25,7 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) -jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) -jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index be3d5ef8c5..c22fb01c15 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -15,10 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =math.ceil(jerk_print * 2 / 25) -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index df04b8634e..7fac331e72 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -23,9 +23,6 @@ infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 20) layer_height = 0.2 line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 819ca14649..ba64926541 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -25,11 +25,7 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) -jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) -jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 8ee593eca5..52f41f837c 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -15,10 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) -jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) -jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index c7a4dcd596..7a6bf3deb5 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -23,9 +23,6 @@ infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True jerk_print = 25 -jerk_topbottom = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall = =max(math.ceil(jerk_print * 25 / 25), 20) -jerk_wall_0 = =max(math.ceil(jerk_wall * 25 / 25), 20) layer_height = 0.2 line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index b73eefe19e..06c71b1dfc 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -25,11 +25,7 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =math.ceil(jerk_support * 10 / 15) -jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10) layer_height = 0.2 machine_min_cool_heat_time_window = 15 machine_nozzle_heat_up_speed = 1.5 diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 1d2da249af..c178cdcd17 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -15,10 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000) cool_fan_speed_max = =cool_fan_speed gradual_support_infill_steps = 2 -jerk_prime_tower = =max(math.ceil(jerk_print * 2 / 25), 20) -jerk_support = =max(math.ceil(jerk_print * 15 / 25), 20) -jerk_support_interface = =max(math.ceil(jerk_support * 10 / 15), 20) -jerk_support_bottom = =max(math.ceil(jerk_support_interface * 1 / 10), 20) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 |