diff options
author | Jack Ha <jackha@gmail.com> | 2018-06-06 18:07:04 +0300 |
---|---|---|
committer | Jack Ha <jackha@gmail.com> | 2018-06-06 18:07:04 +0300 |
commit | 9432252de472c76ef5b7df954d4cb18aefc9fff7 (patch) | |
tree | df14074e9849f35f43ebaa08535f9ae8712c560f | |
parent | 343c606df6f978619937dedc9340068dbe862003 (diff) |
CURA-5342 formulafy speed settings so when changing the main speed, the sub speeds change accordingly
199 files changed, 377 insertions, 377 deletions
diff --git a/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg b/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg index b46e2473af..52a20ac306 100644 --- a/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg +++ b/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 80 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 80) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_pri3/apri3_pla_high.inst.cfg b/resources/quality/abax_pri3/apri3_pla_high.inst.cfg index a12d8d1b72..2effe4cfc2 100644 --- a/resources/quality/abax_pri3/apri3_pla_high.inst.cfg +++ b/resources/quality/abax_pri3/apri3_pla_high.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg b/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg index 3cea7931aa..8cab45135c 100644 --- a/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg +++ b/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg b/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg index ba1de97b89..0d71942031 100644 --- a/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg +++ b/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 80 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 80) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_pri5/apri5_pla_high.inst.cfg b/resources/quality/abax_pri5/apri5_pla_high.inst.cfg index d1ea040f93..184c23a331 100644 --- a/resources/quality/abax_pri5/apri5_pla_high.inst.cfg +++ b/resources/quality/abax_pri5/apri5_pla_high.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg b/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg index c2bb8d343b..c36b4894b8 100644 --- a/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg +++ b/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_titan/atitan_pla_fast.inst.cfg b/resources/quality/abax_titan/atitan_pla_fast.inst.cfg index ec54c373c9..58c41fc68f 100644 --- a/resources/quality/abax_titan/atitan_pla_fast.inst.cfg +++ b/resources/quality/abax_titan/atitan_pla_fast.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 80 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 80) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_titan/atitan_pla_high.inst.cfg b/resources/quality/abax_titan/atitan_pla_high.inst.cfg index f8d016f6d0..3f1336d9e5 100644 --- a/resources/quality/abax_titan/atitan_pla_high.inst.cfg +++ b/resources/quality/abax_titan/atitan_pla_high.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/abax_titan/atitan_pla_normal.inst.cfg b/resources/quality/abax_titan/atitan_pla_normal.inst.cfg index b25a0ff47e..23a3b06fd3 100644 --- a/resources/quality/abax_titan/atitan_pla_normal.inst.cfg +++ b/resources/quality/abax_titan/atitan_pla_normal.inst.cfg @@ -17,6 +17,6 @@ top_bottom_thickness = 0.8 infill_sparse_density = 20 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg index ae18246f3f..633133a8d4 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg @@ -41,13 +41,13 @@ retraction_speed = 40 skirt_brim_speed = 40 skirt_gap = 5 skirt_line_count = 3 -speed_infill = 60 +speed_infill = =speed_print speed_print = 60 speed_support = 60 -speed_topbottom = 30 +speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 100 -speed_wall = 60 -speed_wall_x = 60 +speed_wall = =speed_print +speed_wall_x = =speed_print support_angle = 60 support_enable = True support_interface_enable = True diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg index bbaa9c63b1..9954be2fac 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg @@ -41,13 +41,13 @@ retraction_speed = 40 skirt_brim_speed = 40 skirt_gap = 5 skirt_line_count = 3 -speed_infill = 50 +speed_infill = =speed_print speed_print = 50 speed_support = 30 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) speed_travel = 50 -speed_wall = 50 -speed_wall_x = 50 +speed_wall = =speed_print +speed_wall_x = =speed_print support_angle = 60 support_enable = True support_interface_enable = True diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg index d319b09952..8faececc66 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg @@ -41,13 +41,13 @@ retraction_speed = 40 skirt_brim_speed = 40 skirt_gap = 5 skirt_line_count = 3 -speed_infill = 50 +speed_infill = =speed_print speed_print = 50 speed_support = 30 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) speed_travel = 100 -speed_wall = 50 -speed_wall_x = 50 +speed_wall = =speed_print +speed_wall_x = =speed_print support_angle = 60 support_enable = True support_interface_enable = True diff --git a/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg b/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg index e5718fdc95..c224414b23 100644 --- a/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg @@ -43,11 +43,11 @@ skirt_brim_minimal_length = 75 skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 40 +speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_travel = 200 -speed_wall_0 = 40 +speed_wall_0 = =math.ceil(speed_print * 40 / 50) speed_wall_x = =speed_print support_angle = 70 support_type = buildplate diff --git a/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg b/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg index 2b29b49c68..bfbc1d0129 100644 --- a/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg @@ -43,11 +43,11 @@ skirt_brim_minimal_length = 75 skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 40 +speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_travel = 200 -speed_wall_0 = 40 +speed_wall_0 = =math.ceil(speed_print * 40 / 50) speed_wall_x = =speed_print support_angle = 70 support_type = buildplate diff --git a/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg b/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg index 9853831b12..9636906707 100644 --- a/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg @@ -43,11 +43,11 @@ skirt_brim_minimal_length = 75 skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 40 +speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_travel = 200 -speed_wall_0 = 40 +speed_wall_0 = =math.ceil(speed_print * 40 / 50) speed_wall_x = =speed_print support_angle = 70 support_type = buildplate diff --git a/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg b/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg index 88985a7918..010ce182e6 100644 --- a/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg @@ -43,11 +43,11 @@ skirt_brim_minimal_length = 75 skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 30) speed_print = 30 -speed_topbottom = 40 +speed_topbottom = =math.ceil(speed_print * 40 / 30) speed_travel = 200 -speed_wall_0 = 40 +speed_wall_0 = =math.ceil(speed_print * 40 / 30) speed_wall_x = =speed_print support_angle = 70 support_type = buildplate diff --git a/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg b/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg index cef9b6023a..2b7e7d7c24 100644 --- a/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg @@ -43,11 +43,11 @@ skirt_brim_minimal_length = 75 skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 30) speed_print = 30 -speed_topbottom = 40 +speed_topbottom = =math.ceil(speed_print * 40 / 30) speed_travel = 200 -speed_wall_0 = 40 +speed_wall_0 = =math.ceil(speed_print * 40 / 30) speed_wall_x = =speed_print support_angle = 70 support_type = buildplate diff --git a/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg b/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg index 63b2baf019..4a34c7e369 100644 --- a/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg @@ -43,11 +43,11 @@ skirt_brim_minimal_length = 75 skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 30) speed_print = 30 -speed_topbottom = 40 +speed_topbottom = =math.ceil(speed_print * 40 / 30) speed_travel = 200 -speed_wall_0 = 40 +speed_wall_0 = =math.ceil(speed_print * 40 / 30) speed_wall_x = =speed_print support_angle = 70 support_type = buildplate diff --git a/resources/quality/fast.inst.cfg b/resources/quality/fast.inst.cfg index a725947eba..b77932eb9b 100644 --- a/resources/quality/fast.inst.cfg +++ b/resources/quality/fast.inst.cfg @@ -14,8 +14,8 @@ global_quality = True infill_sparse_density = 10 layer_height = 0.15 cool_min_layer_time = 3 -speed_wall_0 = 40 -speed_wall_x = 80 -speed_infill = 100 +speed_wall_0 = =math.ceil(speed_print * 40 / 60) +speed_wall_x = =math.ceil(speed_print * 80 / 60) +speed_infill = =math.ceil(speed_print * 100 / 60) wall_thickness = 1 -speed_topbottom = 30 +speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/high.inst.cfg b/resources/quality/high.inst.cfg index 673ce56f04..ca621a2b9d 100644 --- a/resources/quality/high.inst.cfg +++ b/resources/quality/high.inst.cfg @@ -12,5 +12,5 @@ global_quality = True [values] layer_height = 0.06 -speed_topbottom = 15 -speed_infill = 80 +speed_topbottom = =math.ceil(speed_print * 15 / 60) +speed_infill = =math.ceil(speed_print * 80 / 60) diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg index 25b6f1155a..4d12c193c0 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg @@ -43,13 +43,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 25 skirt_line_count = 2 -speed_layer_0 = 14 +speed_layer_0 = =math.ceil(speed_print * 14 / 40) speed_print = 40 speed_slowdown_layers = 1 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 40) +speed_wall_x = =math.ceil(speed_print * 35 / 40) top_thickness = =top_bottom_thickness wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg index 2d975b1240..f59bee301a 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg @@ -43,13 +43,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 25 skirt_line_count = 2 -speed_layer_0 = 14 +speed_layer_0 = =math.ceil(speed_print * 14 / 40) speed_print = 40 speed_slowdown_layers = 1 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 40) +speed_wall_x = =math.ceil(speed_print * 35 / 40) top_thickness = =top_bottom_thickness wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg index c510473c3d..f2abdd22a4 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg @@ -43,13 +43,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 25 skirt_line_count = 2 -speed_layer_0 = 14 +speed_layer_0 = =math.ceil(speed_print * 14 / 40) speed_print = 40 speed_slowdown_layers = 1 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 40) +speed_wall_x = =math.ceil(speed_print * 35 / 40) top_thickness = =top_bottom_thickness wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg index 682f850c83..c592252f54 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg @@ -43,13 +43,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 25 skirt_line_count = 2 -speed_layer_0 = 14 +speed_layer_0 = =math.ceil(speed_print * 14 / 40) speed_print = 40 speed_slowdown_layers = 1 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 40) +speed_wall_x = =math.ceil(speed_print * 35 / 40) top_thickness = =top_bottom_thickness wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg index 264878f9d9..98f9a8cf1b 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg @@ -41,13 +41,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg index 8427144478..fd26acc671 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg @@ -41,13 +41,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg index 335e62c698..d233e1cd4a 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg @@ -42,13 +42,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg index bb4f9f0570..4fd76f6b8d 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg @@ -42,13 +42,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg index 8bb391bdaa..1fa7db1c7a 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg @@ -41,13 +41,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg index 9e4d8efddc..402d4dda1d 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg @@ -41,13 +41,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg index aac761463d..de4302e853 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg @@ -43,13 +43,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg index 8df712f8ee..28425681fd 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg @@ -43,13 +43,13 @@ skin_no_small_gaps_heuristic = False skirt_brim_minimal_length = 100 skirt_brim_speed = 20 skirt_line_count = 3 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_slowdown_layers = 1 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 45) speed_travel = 120 speed_travel_layer_0 = 60 -speed_wall = 25 -speed_wall_x = 35 +speed_wall = =math.ceil(speed_print * 25 / 45) +speed_wall_x = =math.ceil(speed_print * 35 / 45) top_thickness = 0.8 wall_thickness = 0.8 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg index 38a5208905..c9f38786f8 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.35 layer_height_0 = 0.3 speed_print = 70 -speed_infill = 60 -speed_layer_0 = 20 -speed_wall_0 = 30 -speed_wall_x = 50 -speed_topbottom = 30 +speed_infill = =math.ceil(speed_print * 60 / 70) +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_wall_0 = =math.ceil(speed_print * 30 / 70) +speed_wall_x = =math.ceil(speed_print * 50 / 70) +speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_travel = 120 material_print_temperature = 246 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg index 9438ecbfa7..a402bb0990 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.06 layer_height_0 = 0.3 speed_print = 40 -speed_infill = 50 -speed_layer_0 = 15 -speed_wall_0 = 20 -speed_wall_x = 40 -speed_topbottom = 20 +speed_infill = =math.ceil(speed_print * 50 / 40) +speed_layer_0 = =math.ceil(speed_print * 15 / 40) +speed_wall_0 = =math.ceil(speed_print * 20 / 40) +speed_wall_x = =speed_print +speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_travel = 120 material_print_temperature = 246 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg index 16d3367472..0aa0c8ace0 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.1 layer_height_0 = 0.3 speed_print = 50 -speed_infill = 60 -speed_layer_0 = 20 -speed_wall_0 = 25 -speed_wall_x = 45 -speed_topbottom = 30 +speed_infill = =math.ceil(speed_print * 60 / 50) +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_wall_0 = =math.ceil(speed_print * 25 / 50) +speed_wall_x = =math.ceil(speed_print * 45 / 50) +speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_travel = 120 material_print_temperature = 246 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg index d0b15cf47b..8c3d118315 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.2 layer_height_0 = 0.3 speed_print = 70 -speed_infill = 60 -speed_layer_0 = 20 -speed_wall_0 = 30 -speed_wall_x = 50 -speed_topbottom = 30 +speed_infill = =math.ceil(speed_print * 60 / 70) +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_wall_0 = =math.ceil(speed_print * 30 / 70) +speed_wall_x = =math.ceil(speed_print * 50 / 70) +speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_travel = 120 material_print_temperature = 246 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg index 2d32a0cc87..a889f34610 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.15 layer_height_0 = 0.3 speed_print = 60 -speed_infill = 50 -speed_layer_0 = 15 -speed_wall_0 = 20 -speed_wall_x = 40 -speed_topbottom = 20 +speed_infill = =math.ceil(speed_print * 50 / 60) +speed_layer_0 = =math.ceil(speed_print * 15 / 60) +speed_wall_0 = =math.ceil(speed_print * 20 / 60) +speed_wall_x = =math.ceil(speed_print * 40 / 60) +speed_topbottom = =math.ceil(speed_print * 20 / 60) speed_travel = 120 material_print_temperature = 246 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg index 8c0d1cf9ca..78a59d00c2 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.06 adhesion_type = skirt speed_print = 40 -speed_infill = 50 -speed_layer_0 = 15 -speed_wall_0 = 20 -speed_wall_x = 40 -speed_topbottom = 20 +speed_infill = =math.ceil(speed_print * 50 / 40) +speed_layer_0 = =math.ceil(speed_print * 15 / 40) +speed_wall_0 = =math.ceil(speed_print * 20 / 40) +speed_wall_x = =speed_print +speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_travel = 120 material_print_temperature = 214 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg index b1e576f162..5ce23ce0d3 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.1 adhesion_type = skirt speed_print = 50 -speed_infill = 60 -speed_layer_0 = 20 -speed_wall_0 = 25 -speed_wall_x = 45 -speed_topbottom = 30 +speed_infill = =math.ceil(speed_print * 60 / 50) +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_wall_0 = =math.ceil(speed_print * 25 / 50) +speed_wall_x = =math.ceil(speed_print * 45 / 50) +speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_travel = 120 material_print_temperature = 214 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg index da6d2d89ae..75b7407449 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg @@ -15,11 +15,11 @@ layer_height = 0.15 adhesion_type = skirt speed_print = 60 -speed_infill = 50 -speed_layer_0 = 15 -speed_wall_0 = 20 -speed_wall_x = 40 -speed_topbottom = 20 +speed_infill = =math.ceil(speed_print * 50 / 60) +speed_layer_0 = =math.ceil(speed_print * 15 / 60) +speed_wall_0 = =math.ceil(speed_print * 20 / 60) +speed_wall_x = =math.ceil(speed_print * 40 / 60) +speed_topbottom = =math.ceil(speed_print * 20 / 60) speed_travel = 120 material_print_temperature = 214 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg index 91153f57f7..257f5a9e81 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg index 6b29fc3649..c7d789e4cf 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg index c32814152f..f474170e69 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg index eb29cfa8a5..b887c3a1f9 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg index 47bd154d90..0182bb2ad9 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg index c7b6a0b44d..22fa4e8ada 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg index f3917e23f7..31edd74bfe 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg index 281374a7f1..f6d3119ada 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg index 002784bf21..ca03cca9a6 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg index 31965ff4ef..32cf802c6f 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg index a828a3466f..4913e1c415 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg index 560a98eedd..1d14d2d9cf 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg index 32aab452b9..9b6fc58109 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg index d591899d58..c8494b4600 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg index 2d1cb39569..25d453a7a1 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg index 41e6553b52..8e583a463d 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg @@ -18,6 +18,6 @@ top_bottom_thickness = 0.72 infill_sparse_density = 22 speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) cool_min_layer_time = 5 cool_min_speed = 10 diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg index 29de7591bf..b85fc8c95c 100644 --- a/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg +++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg @@ -14,13 +14,13 @@ brim_width = 4.0 infill_pattern = zigzag layer_height = 0.3 material_diameter = 1.75 -speed_infill = 50 +speed_infill = =speed_print speed_print = 50 speed_support = 30 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) speed_travel = 100 -speed_wall = 50 -speed_wall_x = 50 +speed_wall = =speed_print +speed_wall_x = =speed_print support_angle = 60 support_enable = True support_interface_enable = True diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg index e495d2d74b..9b52da8c0b 100644 --- a/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg +++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg @@ -14,13 +14,13 @@ brim_width = 4.0 infill_pattern = zigzag layer_height = 0.1 material_diameter = 1.75 -speed_infill = 50 +speed_infill = =speed_print speed_print = 50 speed_support = 30 -speed_topbottom = 15 +speed_topbottom = =math.ceil(speed_print * 15 / 50) speed_travel = 100 -speed_wall = 50 -speed_wall_x = 50 +speed_wall = =speed_print +speed_wall_x = =speed_print support_angle = 60 support_enable = True support_interface_enable = True diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg index 4df87784ef..a171463fde 100644 --- a/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg +++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg @@ -14,13 +14,13 @@ brim_width = 4.0 infill_pattern = zigzag layer_height = 0.2 material_diameter = 1.75 -speed_infill = 60 +speed_infill = =math.ceil(speed_print * 60 / 50) speed_print = 50 speed_support = 30 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) speed_travel = 100 -speed_wall = 50 -speed_wall_x = 50 +speed_wall = =speed_print +speed_wall_x = =speed_print support_angle = 60 support_enable = True support_interface_enable = True diff --git a/resources/quality/ultimaker2/um2_fast.inst.cfg b/resources/quality/ultimaker2/um2_fast.inst.cfg index 99ddb540cc..0534f821e1 100644 --- a/resources/quality/ultimaker2/um2_fast.inst.cfg +++ b/resources/quality/ultimaker2/um2_fast.inst.cfg @@ -14,8 +14,8 @@ global_quality = True infill_sparse_density = 10 layer_height = 0.15 cool_min_layer_time = 3 -speed_wall_0 = 40 -speed_wall_x = 80 -speed_infill = 100 +speed_wall_0 = =math.ceil(speed_print * 40 / 60) +speed_wall_x = =math.ceil(speed_print * 80 / 60) +speed_infill = =math.ceil(speed_print * 100 / 60) wall_thickness = 1 -speed_topbottom = 30 +speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker2/um2_high.inst.cfg b/resources/quality/ultimaker2/um2_high.inst.cfg index f54700bf70..74e1f2f528 100644 --- a/resources/quality/ultimaker2/um2_high.inst.cfg +++ b/resources/quality/ultimaker2/um2_high.inst.cfg @@ -12,5 +12,5 @@ global_quality = True [values] layer_height = 0.06 -speed_topbottom = 15 -speed_infill = 80 +speed_topbottom = =math.ceil(speed_print * 15 / 60) +speed_infill = =math.ceil(speed_print * 80 / 60) diff --git a/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg index b50de37b47..02396f6820 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg @@ -18,8 +18,8 @@ infill_sparse_density = 18 layer_height = 0.15 speed_layer_0 = =round(speed_print * 30 / 60) speed_print = 60 -speed_topbottom = 30 +speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 150 -speed_wall = 50 +speed_wall = =math.ceil(speed_print * 50 / 60) top_bottom_thickness = 0.75 wall_thickness = 0.7 diff --git a/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg index 9481e3427a..62816d0ab0 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg @@ -18,6 +18,6 @@ infill_sparse_density = 22 layer_height = 0.06 speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.72 wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg index 875db4959f..51aa06dc14 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg @@ -18,6 +18,6 @@ infill_sparse_density = 20 layer_height = 0.1 speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.8 wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg index b07b4931ca..f6384421b2 100644 --- a/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg @@ -18,8 +18,8 @@ infill_sparse_density = 20 layer_height = 0.15 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 -speed_topbottom = 20 -speed_wall = 40 -speed_wall_0 = 25 +speed_topbottom = =math.ceil(speed_print * 20 / 55) +speed_wall = =math.ceil(speed_print * 40 / 55) +speed_wall_0 = =math.ceil(speed_print * 25 / 55) top_bottom_thickness = 1.2 wall_thickness = 1.59 diff --git a/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg index 0e76e53316..314ef8ec68 100644 --- a/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg @@ -18,6 +18,6 @@ infill_sparse_density = 20 layer_height = 0.2 speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 -speed_wall_0 = 25 +speed_wall_0 = =math.ceil(speed_print * 25 / 40) top_bottom_thickness = 1.2 wall_thickness = 2.1 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg index ded9319b3e..1a1cd78cb1 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg @@ -20,8 +20,8 @@ infill_sparse_density = 18 layer_height = 0.15 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 -speed_topbottom = 30 +speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_travel = 150 -speed_wall = 40 +speed_wall = =math.ceil(speed_print * 40 / 55) top_bottom_thickness = 0.75 wall_thickness = 0.7 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg index c94333555c..e955186e37 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg @@ -20,6 +20,6 @@ infill_sparse_density = 22 layer_height = 0.06 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 -speed_wall = 30 +speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg index 6adb9c9caf..da79e75346 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg @@ -20,6 +20,6 @@ infill_sparse_density = 20 layer_height = 0.1 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 -speed_wall = 30 +speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg index 332608a2f9..0cb3118bfc 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg @@ -18,7 +18,7 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 20 infill_sparse_density = 20 layer_height = 0.15 -speed_infill = 55 +speed_infill = =math.ceil(speed_print * 55 / 40) speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg index b9ec279e07..7a92009ea1 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg @@ -21,6 +21,6 @@ layer_height = 0.15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 -speed_wall = 40 +speed_wall = =math.ceil(speed_print * 40 / 45) top_bottom_thickness = 0.75 wall_thickness = 0.7 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg index e929d9f545..176bd4c3b9 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg @@ -20,6 +20,6 @@ infill_sparse_density = 22 layer_height = 0.06 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 -speed_wall = 30 +speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg index 7637f6440a..e7d78d68c3 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg @@ -20,6 +20,6 @@ infill_sparse_density = 20 layer_height = 0.1 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 -speed_wall = 30 +speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 wall_thickness = 1.05 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index fe975128a0..0e366a78fb 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -29,11 +29,11 @@ raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.38 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 -speed_topbottom = 20 -speed_wall_0 = 20 -speed_wall_x = 25 +speed_topbottom = =math.ceil(speed_print * 20 / 25) +speed_wall_0 = =math.ceil(speed_print * 20 / 25) +speed_wall_x = =speed_print support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index e7bb7b3449..4e97629fb2 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -29,11 +29,11 @@ raft_interface_line_spacing = 1 raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.38 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 35) speed_print = 35 -speed_topbottom = 20 -speed_wall_0 = 20 -speed_wall_x = 30 +speed_topbottom = =math.ceil(speed_print * 20 / 35) +speed_wall_0 = =math.ceil(speed_print * 20 / 35) +speed_wall_x = =math.ceil(speed_print * 30 / 35) support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index 9751bef5fe..7002367337 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -32,10 +32,10 @@ raft_surface_line_width = 0.57 raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 25 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_travel = 150 -speed_wall_0 = 20 -speed_wall_x = 25 +speed_wall_0 = =math.ceil(speed_print * 20 / 25) +speed_wall_x = =speed_print support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index 203d122de5..b79829e3e3 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -30,12 +30,12 @@ raft_interface_line_width = 1.2 raft_margin = 15 raft_surface_line_width = 0.57 raft_surface_thickness = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 35) speed_print = 35 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_travel = 150 -speed_wall_0 = 30 -speed_wall_x = 35 +speed_wall_0 = =math.ceil(speed_print * 30 / 35) +speed_wall_x = =speed_print support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg index b80949a627..32b79e62cc 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg @@ -30,9 +30,9 @@ raft_surface_line_width = 0.7 raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 -speed_topbottom = 20 -speed_wall_0 = 20 -speed_wall_x = 25 +speed_topbottom = =math.ceil(speed_print * 20 / 25) +speed_wall_0 = =math.ceil(speed_print * 20 / 25) +speed_wall_x = =speed_print support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg index 4f96db3c3b..5ec9db4a02 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg @@ -30,9 +30,9 @@ raft_surface_line_width = 0.7 raft_surface_thickness = 0.2 speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 -speed_topbottom = 20 -speed_wall_0 = 20 -speed_wall_x = 30 +speed_topbottom = =math.ceil(speed_print * 20 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) +speed_wall_x = =speed_print support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg index d31c23a5c0..a84f8853d1 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg @@ -28,13 +28,13 @@ raft_interface_line_width = 0.5 raft_margin = 15 raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 40) speed_travel = 150 -speed_wall_0 = 20 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 20 / 40) +speed_wall_x = =speed_print support_enable = True support_infill_rate = 20 support_pattern = lines diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg index 0f9fd57197..6f1eae09c6 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg @@ -28,13 +28,13 @@ raft_interface_line_width = 0.5 raft_margin = 15 raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 40) speed_travel = 150 -speed_wall_0 = 20 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 20 / 40) +speed_wall_x = =speed_print support_enable = True support_infill_rate = 20 support_pattern = lines diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg index 0d8371760f..6527c98990 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg @@ -28,11 +28,11 @@ raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.5 raft_surface_thickness = 0.15 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 -speed_wall = 40 +speed_wall = =math.ceil(speed_print * 40 / 45) support_angle = 45 support_enable = True support_infill_rate = 25 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg index 3ac77b3642..7c9c13ad9d 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg @@ -28,10 +28,10 @@ raft_interface_line_width = 0.8 raft_margin = 15 raft_surface_line_width = 0.5 raft_surface_thickness = 0.15 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 -speed_wall = 40 +speed_wall = =math.ceil(speed_print * 40 / 45) support_angle = 45 support_enable = True support_infill_rate = 25 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index d6332e5688..f0a141bfa6 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -29,13 +29,13 @@ raft_margin = 15 raft_surface_line_width = 0.6 raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 55) speed_travel = 150 -speed_wall_0 = 15 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 15 / 55) +speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 support_bottom_distance = 0.55 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg index 22250e1147..adaf07c272 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg @@ -29,13 +29,13 @@ raft_margin = 15 raft_surface_line_width = 0.6 raft_surface_thickness = 0.15 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 55) speed_travel = 150 -speed_wall_0 = 15 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 15 / 55) +speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 support_enable = True support_infill_rate = 25 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index 0ba3a33812..cd292e6a2b 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -28,13 +28,13 @@ raft_margin = 15 raft_surface_line_width = 0.7 raft_surface_thickness = 0.2 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 55) speed_travel = 150 -speed_wall_0 = 15 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 15 / 55) +speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 support_bottom_distance = 0.65 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg index 5e0d64ec12..a93243dca5 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg @@ -31,10 +31,10 @@ retraction_hop_enabled = 0.2 speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 55) speed_travel = 150 -speed_wall_0 = 15 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 15 / 55) +speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 support_bottom_distance = 0.65 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg index aaf4812786..23ace92112 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg @@ -29,8 +29,8 @@ raft_interface_line_width = 0.8 raft_margin = 15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 -speed_wall_0 = 20 -speed_wall_x = 30 +speed_wall_0 = =math.ceil(speed_print * 20 / 45) +speed_wall_x = =math.ceil(speed_print * 30 / 45) support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg index a54ce9d946..32b0c37636 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg @@ -29,8 +29,8 @@ raft_interface_line_width = 0.8 raft_margin = 15 speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 -speed_wall_0 = 20 -speed_wall_x = 30 +speed_wall_0 = =math.ceil(speed_print * 20 / 45) +speed_wall_x = =math.ceil(speed_print * 30 / 45) support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg index 2d50f96661..a038e6d2b8 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg @@ -29,12 +29,12 @@ raft_interface_line_width = 1.2 raft_margin = 15 raft_surface_line_width = 0.6 raft_surface_thickness = 0.15 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 -speed_wall_0 = 30 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 30 / 45) +speed_wall_x = =math.ceil(speed_print * 40 / 45) support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg index a19483c39a..b4b556a720 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg @@ -29,12 +29,12 @@ raft_interface_line_width = 1.2 raft_margin = 15 raft_surface_line_width = 0.6 raft_surface_thickness = 0.15 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 -speed_topbottom = 20 +speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 -speed_wall_0 = 30 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 30 / 45) +speed_wall_x = =math.ceil(speed_print * 40 / 45) support_angle = 45 support_enable = True support_infill_rate = 20 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 16c4a47340..cf4de8bb39 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -50,7 +50,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = 25 +speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index d318275700..8ceed3cd94 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -49,7 +49,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = 25 +speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index dd150d903a..d22984afa1 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -50,7 +50,7 @@ retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.6 -speed_layer_0 = 25 +speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index 8cb602b7eb..4421aba1ac 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -50,7 +50,7 @@ retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.6 -speed_layer_0 = 25 +speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 3e38caa1ec..aa7f5c27ee 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -50,7 +50,7 @@ retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.8 -speed_layer_0 = 25 +speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index 39408477af..177e86c60d 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -50,7 +50,7 @@ retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.8 -speed_layer_0 = 25 +speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg index 3e5f8f8180..384a96b2e1 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg @@ -27,13 +27,13 @@ raft_interface_line_spacing = 1 raft_interface_line_width = 0.2 raft_surface_line_width = 0.2 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 40) speed_travel = 150 -speed_wall_0 = 15 -speed_wall_x = 38 +speed_wall_0 = =math.ceil(speed_print * 15 / 40) +speed_wall_x = =math.ceil(speed_print * 38 / 40) support_angle = 45 support_enable = True support_infill_rate = 25 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg index 84065dbfdf..3a2825685e 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg @@ -24,13 +24,13 @@ raft_base_line_width = 0.8 raft_interface_line_spacing = 1 raft_margin = 12 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 40) speed_travel = 150 -speed_wall_0 = 20 -speed_wall_x = 35 +speed_wall_0 = =math.ceil(speed_print * 20 / 40) +speed_wall_x = =math.ceil(speed_print * 35 / 40) support_angle = 45 support_enable = True support_infill_rate = 25 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index ec424a6f40..aff0d6d0d5 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -29,13 +29,13 @@ raft_interface_line_width = 0.57 raft_margin = 15 raft_surface_line_width = 0.5 retraction_hop_enabled = 0.2 -speed_layer_0 = 30 +speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_support = 40 -speed_topbottom = 35 +speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_travel = 150 -speed_wall_0 = 15 -speed_wall_x = 40 +speed_wall_0 = =math.ceil(speed_print * 15 / 45) +speed_wall_x = =math.ceil(speed_print * 40 / 45) support_angle = 45 support_enable = True support_infill_rate = 25 diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg index fabe67cc27..0292bfa6d1 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -16,7 +16,7 @@ prime_tower_purge_volume = 1 prime_tower_size = 12 prime_tower_wall_thickness = 0.9 retraction_extrusion_window = 0.5 -speed_infill = 40 +speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 8444d0faef..608bc837c7 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -38,9 +38,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg index 14345dc626..b4c557216e 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -24,11 +24,11 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = 190 retraction_hop = 0.2 skin_overlap = 5 -speed_layer_0 = 30 +speed_layer_0 = =speed_print speed_print = 30 speed_travel_layer_0 = 120 -speed_wall = 25 -speed_wall_0 = 20 +speed_wall = =math.ceil(speed_print * 25 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 travel_avoid_distance = 0.4 wall_0_inset = 0.015 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index dd8a906e4c..fefbf55b97 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -42,7 +42,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel = 300 speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index f7748e3903..d03f8f24c1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 10 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 50fb12eaa4..ca82990b13 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_enable = False speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 6215afc9df..35cd06e589 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -21,6 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 prime_tower_enable = False speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index a7683fb249..fdeafbc86b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,6 +19,6 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_enable = False speed_print = 55 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index f9a2bd88a4..d9a241742b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index d181e7e4c9..5d7d6bde25 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index 4a8bde54b3..d85bb0cbf6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 8f071b18d7..9a1dd89f9c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -38,7 +38,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index fc6eee65bc..e3c0e9d69a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -38,7 +38,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 3559ed5e67..e3c7dd7941 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -40,7 +40,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 02a807c7b8..1496ac3c05 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -39,7 +39,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index 7a54e34f6d..686073542f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -19,7 +19,7 @@ material_standby_temperature = 100 prime_tower_purge_volume = 1 skin_overlap = 20 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg index 94476b33d1..d35ada198c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_purge_volume = 1 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg index d8899f1bca..f33425f7c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg @@ -21,6 +21,6 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_purge_volume = 1 speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg index 4f144ca92e..650e5a4bef 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -19,6 +19,6 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_purge_volume = 1 speed_print = 55 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index 91600ed6fa..ab5f60feb5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -29,7 +29,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 7db3683333..64508a15ea 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -29,7 +29,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index fd9ffb53b4..85ac422729 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -28,7 +28,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index c8ed69342d..4f6ebbe993 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -28,7 +28,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 2f05384abd..dc72708d9f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -48,7 +48,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index ef6f5978ad..0a5990d00d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index cbba3ffddb..51596c0af1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -48,7 +48,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index ac78470b03..42055f214d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -45,7 +45,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 735dac3b76..cb44ec8664 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index b69fa30a8b..c22c6b3a11 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 80 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index 325d22fe5a..6af3bb1e70 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -23,7 +23,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 30 / 60) top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 910f3cec4b..f0be5bf4ea 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -21,6 +21,6 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 4ea3552891..4870a547c6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -49,7 +49,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index bfb0085db4..77d5651cd9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -48,7 +48,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index f3b30b853b..019bf8abda 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index 850fbd247b..fbe9e70219 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -27,7 +27,7 @@ prime_tower_enable = False roofing_layer_count = 2 skin_outline_count = 0 skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index f61e356a8f..2575a01cdb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 0779260c76..5347df099f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 59c650ef0e..51e6c98306 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -48,7 +48,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index f0a889c12e..1e3cb508d7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -49,7 +49,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 1b6ac261cf..2f113beb47 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -46,7 +46,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index 961e127a57..ed6e35f700 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index b112bf8f4f..6ce17b25f2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -27,7 +27,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index c51ee3a90f..c4b0655e3d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -27,7 +27,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index fba7e2c824..c6258781e0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 5838a48fb7..6e272a3c9f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index 83a331e801..61ab7e29ea 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -23,7 +23,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg index a69053b8ab..f8305eda7c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ variant = AA 0.25 prime_tower_size = 12 prime_tower_wall_thickness = 0.9 retraction_extrusion_window = 0.5 -speed_infill = 40 +speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index c188f37d96..bd5e8d08ff 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -38,9 +38,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index f964bba440..6d7c46772c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -24,11 +24,11 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = 190 retraction_hop = 0.2 skin_overlap = 5 -speed_layer_0 = 30 +speed_layer_0 = =speed_print speed_print = 30 speed_travel_layer_0 = 120 -speed_wall = 25 -speed_wall_0 = 20 +speed_wall = =math.ceil(speed_print * 25 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 travel_avoid_distance = 0.4 wall_0_inset = 0.015 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 72c16ebc1d..d4b4691be4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -42,7 +42,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index b2c44dab01..2cf03fe4c9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index 0470956c6d..9b819ad56a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 497071e01a..3fce280901 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index f080adb06f..3e1836b3b6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 55 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg index b4652d23dd..f33b562820 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg index bebc993ca3..6ed4df3844 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg index 40f0c2ab70..764094b897 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ material_print_temperature = =default_material_print_temperature - 10 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index bb5cad456f..aa34425a46 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -35,7 +35,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index ef3e8d7f4e..5ae2a219ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -35,7 +35,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index 823a6e0fdf..77b2201627 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 05c960e443..3963e53991 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 744b49b03b..3f0ff31ce1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 skin_overlap = 20 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg index 58757c6dd1..7b4155c1e2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 60 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg index 010ad9114a..01cf298308 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg @@ -19,7 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg index 386350212d..bfec569199 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 55 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index ac23b19285..42c1e4c195 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -29,7 +29,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 977ba5c309..76a1773bf4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -29,7 +29,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 7e4ebed906..3d83a83d4e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -28,7 +28,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 941561499b..5ec5bed4c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -28,7 +28,7 @@ raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 04db39fc54..14562c3763 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -47,9 +47,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 65fd293954..e331f446f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -46,9 +46,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index d75b918479..afbb374fe2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -47,9 +47,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index ccffa0bc7c..969d7fc29c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -45,9 +45,9 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = 25 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 -speed_topbottom = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 8ea92a86d7..909af71245 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index 35a6c51ea4..fea7a76971 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 70 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index d739d132a9..d9ef5052e5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 50 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 7c86049fe1..a2eb547b08 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 wall_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index e53cd8f7a8..fb806d2a8e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index e9d08feaff..30fe9772ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 58d9e1639a..7be40498f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -47,7 +47,7 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 speed_equalize_flow_enabled = True -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index 8adebb167e..d13e6a8b68 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -27,7 +27,7 @@ prime_tower_enable = False roofing_layer_count = 2 skin_outline_count = 0 skin_overlap = 20 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index 780ad37ab4..b41f7851cf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 3bcb7142e9..1c3f1470a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 45 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index b1e7eee3bb..81a952d743 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 56249427bf..5009b8395f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -46,7 +46,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index e362ffd25d..64475d822e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -46,7 +46,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 8ffe0afae6..ac6a62ae5a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -45,7 +45,7 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True -speed_layer_0 = 18 +speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 4599155da4..3c1b47bfdb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 36654edf61..00ef557151 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 0588f2bf34..86535d5d77 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -26,7 +26,7 @@ retraction_combing = off retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index fddb41d4b5..2e90b0215f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 9f364651c4..cf1dcfe540 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -21,7 +21,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index d3ee0ed88c..7c77bf1d53 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 raft_airgap = 0.5 raft_margin = 15 skin_overlap = 0 -speed_layer_0 = 15 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg index fe1e98747d..cc538076d2 100644 --- a/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg +++ b/resources/quality/zyyx/zyyx_agile_pro_flex_fast.inst.cfg @@ -20,8 +20,8 @@ material_print_temperature_layer_0 = 235 retraction_amount = 1.0 retraction_speed = 15 speed_print = 20 -speed_wall = 20 -speed_wall_x = 20 +speed_wall = =speed_print +speed_wall_x = =speed_print adhesion_type = brim material_flow = 105 raft_airgap = 0.2 diff --git a/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg index e0b43cfd95..1791305b92 100644 --- a/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg +++ b/resources/quality/zyyx/zyyx_agile_pro_flex_fine.inst.cfg @@ -20,8 +20,8 @@ material_print_temperature_layer_0 = 235 retraction_amount = 0.2 retraction_speed = 15 speed_print = 15 -speed_wall = 15 -speed_wall_x = 15 +speed_wall = =speed_print +speed_wall_x = =speed_print adhesion_type = brim material_flow = 105 raft_airgap = 0.1 diff --git a/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg index 959f65469a..70020f5fde 100644 --- a/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg +++ b/resources/quality/zyyx/zyyx_agile_pro_flex_normal.inst.cfg @@ -20,8 +20,8 @@ material_print_temperature_layer_0 = 235 retraction_amount = 1.0 retraction_speed = 15 speed_print = 20 -speed_wall = 15 -speed_wall_x = 20 +speed_wall = =math.ceil(speed_print * 15 / 20) +speed_wall_x = =speed_print adhesion_type = brim material_flow = 105 raft_airgap = 0.2 diff --git a/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg index 14b9d50351..0f36b6cb67 100644 --- a/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg +++ b/resources/quality/zyyx/zyyx_agile_pro_pla_fast.inst.cfg @@ -20,8 +20,8 @@ material_print_temperature_layer_0 = 225 retraction_amount = 1.5 retraction_speed = 20 speed_print = 40 -speed_wall = 40 -speed_wall_x = 40 +speed_wall = =speed_print +speed_wall_x = =speed_print adhesion_type = brim material_flow = 95 raft_airgap = 0.15 diff --git a/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg index 25f3aa45de..80ad562b2a 100644 --- a/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg +++ b/resources/quality/zyyx/zyyx_agile_pro_pla_fine.inst.cfg @@ -20,8 +20,8 @@ material_print_temperature_layer_0 = 225 retraction_amount = 0.4 retraction_speed = 20 speed_print = 35 -speed_wall = 18 -speed_wall_x = 25 +speed_wall = =math.ceil(speed_print * 18 / 35) +speed_wall_x = =math.ceil(speed_print * 25 / 35) adhesion_type = brim material_flow = 95 raft_airgap = 0.08 diff --git a/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg b/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg index 3760781e54..e3b933bc1c 100644 --- a/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg +++ b/resources/quality/zyyx/zyyx_agile_pro_pla_normal.inst.cfg @@ -20,8 +20,8 @@ material_print_temperature_layer_0 = 225 retraction_amount = 1.2 retraction_speed = 20 speed_print = 50 -speed_wall = 22 -speed_wall_x = 33 +speed_wall = =math.ceil(speed_print * 22 / 50) +speed_wall_x = =math.ceil(speed_print * 33 / 50) adhesion_type = brim material_flow = 95 raft_airgap = 0.15 |