remove setting, follow the default

PP-170

60 files changed, 1 insertions, 91 deletions

diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index fd21ab5271..000f114122 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -136,8 +136,6 @@
         "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
-        "retraction_count_max": { "value": "10" },
-        "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
         "retraction_hop_only_when_collides": { "value": "True" },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 640a062c6d..c4f2de9a60 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -128,8 +128,6 @@
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
-        "retraction_count_max": { "value": "10" },
-        "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
         "retraction_hop_only_when_collides": { "value": "True" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index 0d5d7499cc..2cef93fcaf 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -130,8 +130,6 @@
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
         "retraction_combing": { "value": "'no_outer_surfaces'"},
-        "retraction_count_max": { "value": "10" },
-        "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
         "retraction_hop_only_when_collides": { "value": "True" },
diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
index c63858f825..a24b18563d 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cpe
 variant = AA 0.25
 
 [values]
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
index c17554a0cc..8ccde4e1b5 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg
index 36a3e23c27..ce7087bf3a 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_petg
 variant = AA 0.25
 
 [values]
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index f2b4caf168..82286bb5ab 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -29,7 +29,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index addd4790db..42a0354547 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -29,7 +29,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index 3c1baa8640..5f5d7c937b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -31,7 +31,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index e0c239c536..6004eeb842 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index f33132ee5b..3567b809ec 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -39,8 +39,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 8c02c9c816..b21915617b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index 4ff801f4fa..07ce23faa9 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -39,8 +39,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index 180d96011d..7bdee75d36 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
index d875b9c8f3..5ced8748b1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index a3a0073bba..071db69a43 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
index 516f24dec5..6c3a7e7a81 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 8
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index 0b8555734e..8a060fd258 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
index f3dce95478..526e12bfe0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
index f895647971..28f01d544b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -30,7 +30,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
index bba0f354c9..abb7689a38 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 85d31733e6..5190288662 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -38,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index a9cdf6336d..0d88afb30a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index ff5d6f4f7c..c694b5db79 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -38,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index a61e50f280..5287ce24c4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
index 52499d000c..f895450c0a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index e77d2a2dd9..0d6cc0cd78 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
index 7a3b50c550..76c8372166 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 8
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index 1d12f8f8d9..83833939fc 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 12db110133..9b2e84614b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index eb4db520bd..d6a0d6306d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -30,7 +30,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index 71102926d8..f087010c9e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -29,7 +29,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index d9bc39705b..997bdfcd88 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 03999c27e1..8b8a21911b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index de05aa5cac..73e151926c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -38,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 658e118686..5343242e32 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg
index 2d59246c4a..1763fa9dfd 100644
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@@ -26,8 +26,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg
index ead9c3b87a..9b0fba58e7 100644
--- a/resources/variants/ultimaker3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.8.inst.cfg
@@ -34,8 +34,6 @@ prime_tower_enable = False
 prime_tower_wipe_enabled = True
 retract_at_layer_change = =not magic_spiralize
 retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg
index d82cca6b01..bf9e8592d6 100644
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@@ -23,7 +23,6 @@ raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index 09706598ab..191af44f7f 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -50,8 +50,6 @@ raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_amount = 4.5
-retraction_count_max = 15
-retraction_extrusion_window = =retraction_amount
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 3
diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg
index 60dfc44e8c..ff6f20a533 100644
--- a/resources/variants/ultimaker3_bb04.inst.cfg
+++ b/resources/variants/ultimaker3_bb04.inst.cfg
@@ -25,8 +25,6 @@ raft_base_speed = 20
 raft_interface_speed = 20
 raft_speed = 25
 retraction_amount = 4.5
-retraction_count_max = 20
-retraction_extrusion_window = =retraction_amount
 retraction_min_travel = =3 * line_width
 speed_layer_0 = 20
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
index d6f375932e..ac7aa996c7 100644
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -26,8 +26,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
index df7e9486a2..639ff82eba 100644
--- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
@@ -34,8 +34,6 @@ prime_tower_enable = False
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
 retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg
index f95c820780..777f5a3a19 100644
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@@ -23,7 +23,6 @@ raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index b50c9cc81b..9c73bd7bb2 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -50,8 +50,6 @@ raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_amount = 4.5
-retraction_count_max = 15
-retraction_extrusion_window = =retraction_amount
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 3
diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg
index 798685946f..dd644a2c07 100644
--- a/resources/variants/ultimaker3_extended_bb04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg
@@ -25,8 +25,6 @@ raft_base_speed = 20
 raft_interface_speed = 20
 raft_speed = 25
 retraction_amount = 4.5
-retraction_count_max = 20
-retraction_extrusion_window = =retraction_amount
 retraction_min_travel = =3 * line_width
 speed_layer_0 = 20
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
index fdbd9f6d3b..14d1e3a7b8 100644
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@@ -26,8 +26,7 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
-retraction_extrusion_window = 1
+
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
index 237b38fa11..4f27cd008a 100644
--- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
@@ -34,8 +34,6 @@ prime_tower_enable = False
 prime_tower_wipe_enabled = True
 retract_at_layer_change = =not magic_spiralize
 retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index 181a237405..f6049f3c6d 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -23,7 +23,6 @@ raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
 speed_print = 70
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 56b2d3a5c3..a2d6ede0ea 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -49,8 +49,6 @@ raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_amount = 4.5
-retraction_count_max = 15
-retraction_extrusion_window = =retraction_amount
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 3
diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg
index 2fad997372..230e525ee9 100644
--- a/resources/variants/ultimaker_s3_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb04.inst.cfg
@@ -25,8 +25,6 @@ raft_base_speed = 20
 raft_interface_speed = 20
 raft_speed = 25
 retraction_amount = 4.5
-retraction_count_max = 20
-retraction_extrusion_window = =retraction_amount
 retraction_min_travel = =3 * line_width
 speed_layer_0 = 20
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index f83e60119b..9a5194ad15 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -22,7 +22,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index 2563ca2c11..8a839f040e 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -22,7 +22,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
index c57414f18a..edd2141acc 100644
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@@ -26,8 +26,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
index 6eb4ac8e25..5e55770225 100644
--- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
@@ -34,8 +34,6 @@ prime_tower_enable = False
 prime_tower_wipe_enabled = True
 retract_at_layer_change = =not magic_spiralize
 retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index 8e4b7780f0..8453254625 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -23,7 +23,6 @@ raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
 speed_print = 70
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index 0c0e162745..9a6a3961e5 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -49,8 +49,6 @@ raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_amount = 4.5
-retraction_count_max = 15
-retraction_extrusion_window = =retraction_amount
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 3
diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg
index 90c19685ba..113bfa7f3b 100644
--- a/resources/variants/ultimaker_s5_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb04.inst.cfg
@@ -25,8 +25,6 @@ raft_base_speed = 20
 raft_interface_speed = 20
 raft_speed = 25
 retraction_amount = 4.5
-retraction_count_max = 20
-retraction_extrusion_window = =retraction_amount
 retraction_min_travel = =3 * line_width
 speed_layer_0 = 20
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index 356df76f2e..ac5420f127 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -22,7 +22,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index 027274bca5..0d27f9cdce 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -22,7 +22,6 @@ raft_interface_thickness = =layer_height * 1.5
 raft_jerk = =jerk_print
 raft_margin = 15
 raft_surface_layers = 2
-retraction_count_max = 25
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print