diff options
author | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-09-13 12:18:38 +0300 |
---|---|---|
committer | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-09-13 12:18:38 +0300 |
commit | 179e6bdfb6de33aa3e0f5f0a5542efd5574c030c (patch) | |
tree | f4de23cb3bee074a1410b6385638511c93f1c882 | |
parent | d7dd7252dbe8f1159d7aad7c209aea1402fa5089 (diff) |
cleanup raft speeds
raft base speed is only 15mm/s to avoid extreme flows. The raft surface speed equals the top/bottom speed, so the raft surface has a flow equal to the top/bottom flow. The raft interface is again the average of the surface and the base. PP-243
20 files changed, 17 insertions, 45 deletions
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index e12d285ff2..bacaaa9fb8 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -239,15 +239,27 @@ "gradual_support_infill_step_height": { "value": "4*layer_height" }, + "raft_base_speed": { + "value": "raft_speed" + }, "raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" }, "raft_interface_line_width": { "value": "(raft_base_line_width + raft_surface_line_width) / 2" }, + "raft_interface_speed": { + "value": "(raft_surface_speed + raft_base_speed) /2" + }, "raft_interface_thickness": { "value": "(raft_base_thickness + raft_surface_thickness) / 2" }, + "raft_speed": { + "value": 15 + }, + "raft_surface_speed": { + "value": "speed_topbottom" + }, "support_interface_height": { "value": "2*layer_height" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index a49d9ecc35..6653ffddf4 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -101,9 +101,6 @@ "optimize_wall_printing_order": { "value": "True" }, "prime_tower_enable": { "value": "True" }, "raft_airgap": { "value": "0" }, - "raft_base_speed": { "value": "20" }, - "raft_interface_speed": { "value": "20" }, - "raft_speed": { "value": "25" }, "retraction_amount": { "value": "6.5" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 4808522393..1f5fa06ee7 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -102,9 +102,6 @@ "multiple_mesh_overlap": { "value": "0" }, "prime_tower_enable": { "value": "True" }, "raft_airgap": { "value": "0" }, - "raft_base_speed": { "value": "20" }, - "raft_interface_speed": { "value": "20" }, - "raft_speed": { "value": "25" }, "retraction_amount": { "value": "6.5" }, "retraction_combing": { "value": "'no_outer_surfaces'"}, "retraction_hop": { "value": "2" }, diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index b2c251acda..c720f91ec8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -27,6 +27,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - -raft_surface_speed = 45 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 3a23a2fe1a..28775a27a8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -25,5 +25,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index 828dbf8d68..56541021e4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -25,5 +25,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index afccb4b635..f96b871988 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -24,5 +24,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 0e3b1d91db..7dac76c1c2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -25,4 +25,3 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index aab6c7346f..98a5043573 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -26,4 +26,3 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index dc70f20064..3a1ec77384 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -26,4 +26,3 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index e39c055894..f49d212766 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -24,5 +24,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index d1af2ebce4..7ff428bed2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -24,5 +24,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -raft_surface_speed = 45 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index daabe534b3..ac3b3405ee 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -33,9 +33,6 @@ prime_tower_enable = False prime_tower_wipe_enabled = True raft_acceleration = =acceleration_layer_0 raft_airgap = 0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 49837e24ea..05e91d0752 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index e06785e07c..b33e959e8c 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -33,9 +33,6 @@ prime_tower_enable = False prime_tower_wipe_enabled = True raft_acceleration = =acceleration_layer_0 raft_airgap = 0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index 94a687c951..69968e721e 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 03109856cf..63be458a7e 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -32,9 +32,6 @@ prime_tower_enable = False prime_tower_wipe_enabled = True raft_acceleration = =acceleration_layer_0 raft_airgap = 0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 526f724eea..9c18713818 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 53f2b4ea6c..b8baddc5a7 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -32,9 +32,6 @@ prime_tower_enable = False prime_tower_wipe_enabled = True raft_acceleration = =acceleration_layer_0 raft_airgap = 0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 18770b1c4d..6e378bbb82 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -17,9 +17,6 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -raft_base_speed = 20 -raft_interface_speed = 20 -raft_speed = 25 retraction_min_travel = =3 * line_width speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) |