raft middle line width has new default

The raft middle line width is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243

67 files changed, 3 insertions, 66 deletions

diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index 6bf1fa2f12..872a7a6876 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -239,6 +239,9 @@
         "gradual_support_infill_step_height": {
             "value": "4*layer_height"
         },
+        "raft_interface_line_width": {
+            "value": "(raft_base_line_width + raft_surface_line_width) / 2"
+        },
         "raft_interface_thickness": {
             "value": "(raft_base_thickness + raft_surface_thickness) / 2"
         },
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index 3af6e4f794..fed2a698c2 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -114,7 +114,6 @@
         "raft_airgap": { "value": "0" },
         "raft_base_thickness": { "value": "0.3" },
         "raft_interface_line_spacing": { "value": "0.5" },
-        "raft_interface_line_width": { "value": "0.5" },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index e03e411c00..1fd21fa658 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -104,7 +104,6 @@
         "raft_base_speed": { "value": "20" },
         "raft_base_thickness": { "value": "0.3" },
         "raft_interface_line_spacing": { "value": "0.5" },
-        "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_speed": { "value": "25" },
         "retraction_amount": { "value": "6.5" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index 18012623fd..2693c81862 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -105,7 +105,6 @@
         "raft_base_speed": { "value": "20" },
         "raft_base_thickness": { "value": "0.3" },
         "raft_interface_line_spacing": { "value": "0.5" },
-        "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_speed": { "value": "25" },
         "retraction_amount": { "value": "6.5" },
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
index 408bbfbf70..768334075b 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
index 43b4a3c4de..61ef64c231 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
index d9d1a95732..06aa4d8996 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
@@ -25,7 +25,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
index 7fa30e5622..613a9c0974 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
@@ -25,7 +25,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
index ba6daf4f0f..44fa2e5a6b 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
index 638a5aec62..078bd7ad3d 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
index 28af91edec..888aa584d9 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
index 26f8c2dc2f..a9f2405a58 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
index 4a329ddd09..1d0f09aa61 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
index 1cafa4eb6c..646c8bcb36 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
index 5b66c96e1e..6800264142 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
index b97842eec2..c5bd35c41b 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
index 88de5d38ea..a0807b6901 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
index 956267e692..9b15d44b17 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
index d16c98ca51..15ff99f287 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
@@ -25,7 +25,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
index 357ac9951e..1ffc1f2401 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
@@ -25,7 +25,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
index f036ab0f87..55b4dcb902 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
index 52b20c016a..99d7cae43b 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
index 356ad682bc..1f140e2c96 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
index da9d4d3756..e381437043 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
index 576bb9a56c..5c6277b7ec 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
index 2802f98c6c..20ed9ce87a 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
index 15e42dbc25..e1017c2a1e 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
index c03984ae0c..618056a2a6 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
 raft_interface_line_spacing = 1.2
-raft_interface_line_width = 0.57
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
index c864534d6d..0835413f1c 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
index e231e14dcd..495c1fa968 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
index 3b12cf1a0c..f693e5646a 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
index ade879e733..159dfa0357 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
index c3737ae777..3fcedc20ae 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
index 3da16731c0..010cd2928d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
index d6db20113b..53384b766e 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
index 2fd0790122..44d4769992 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
index 6b3c8c6ec4..a484ba7906 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@@ -22,7 +22,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
index 081a7a5dcc..96efa8f9df 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@@ -22,7 +22,6 @@ raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
index 1819780c07..46df73097d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@@ -22,7 +22,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
index 4e5818388c..d3099dca96 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@@ -22,7 +22,6 @@ raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
index bbfe07ba91..a92540fb6b 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@@ -21,7 +21,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
index c1895f5ffa..463ce7ebe4 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@@ -21,7 +21,6 @@ layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
index b8567423a9..f1c20e86d3 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
index 16a8fffce6..2400aa58f1 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@@ -24,7 +24,6 @@ raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
-raft_interface_line_width = 0.5
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
index b2e80c7016..b7260de2bf 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
index 5f0d58ee2b..98ac52a3c9 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.8
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
index b0038f92d0..afb54f4ec5 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
index e23a4895bc..000118d151 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
-raft_interface_line_width = 1.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
index 8f8326347e..511654d090 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
-raft_interface_line_width = 1.6
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
index 8c6b2394e2..d4c41bde85 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
-raft_interface_line_width = 0.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
index 0100b05f5a..53f0c748ce 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@@ -23,7 +23,6 @@ raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
 raft_interface_line_spacing = 1.2
-raft_interface_line_width = 0.57
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg
index 0e4713d237..8feff83425 100644
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg
index 646cd2398a..17b57ddde8 100644
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index d0f068889f..8c382cba04 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -36,7 +36,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
index 1c477f6bfe..a4f49c4999 100644
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg
index 23717d8390..5b260fa44e 100644
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index a4b50368c6..9b3ec32374 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -36,7 +36,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
index f9c05bfc4b..d40d7cca64 100644
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index a63cdc0377..95b5108ff6 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 89a17cdccd..2f78121860 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -35,7 +35,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index 82ec944bde..bbb7f2fd58 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index 527d90810c..d389783b67 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
index 864e5d06bb..fc45000058 100644
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@@ -21,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index e7aed2bf94..318c1b40b4 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index d2fe5a408c..93ca449ac1 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -35,7 +35,6 @@ raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index 1c59e0377d..c67cad4cb6 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index a142a887c5..bccde4f56e 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -17,7 +17,6 @@ raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
-raft_interface_line_width = =line_width * 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print