diff options
author | p.kuiper <p.kuiper@ultimaker.com> | 2022-06-13 22:41:46 +0300 |
---|---|---|
committer | p.kuiper <p.kuiper@ultimaker.com> | 2022-06-13 22:41:46 +0300 |
commit | bfc25b8350e005f3710d63d55c16a1b234aed208 (patch) | |
tree | a33ff8122a2f86ed8c41643c029af707a92ee7bb | |
parent | 55f1b9efca45f0229c08854e7b68b2a98ca9e908 (diff) |
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
Relates to PP-108
91 files changed, 42 insertions, 125 deletions
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 7df65f8b83..1484935191 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -214,20 +214,14 @@ "jerk_skirt_brim": { "minimum_value_warning": 20 }, - "support_pattern": { - "value": "'zigzag'" - }, "support_wall_count": { "value": "1 if support_structure == 'tree' else 0" }, "zig_zaggify_support": { "value": true }, - "support_connect_zigzags": { - "value": true - }, "support_infill_rate": { - "value": "80 if support_interface_enable else 15" + "value": "80 if gradual_support_infill_steps != 0 else 15" }, "gradual_support_infill_steps": { "value": "2 if support_interface_enable else 0" @@ -248,13 +242,13 @@ "value": "wall_line_width_0" }, "minimum_support_area": { - "value": "pow((2 + support_offset), 2)" + "value": "(2 + support_offset)**2" }, "support_interface_skip_height": { "value": "layer_height" }, "support_interface_pattern": { - "value": "'zigzag'" + "value": "'concentric'" }, "support_interface_offset": { "value": "support_offset" diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index 29ca032a8f..cd5a66151d 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -36,9 +36,7 @@ speed_travel = 150 speed_wall_0 = =math.ceil(speed_print * 15 / 55) speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 -support_bottom_distance = 0.55 support_enable = True -support_top_distance = 0.55 -support_z_distance = =layer_height * 2 +support_z_distance = 0.55 top_bottom_thickness = 1.2 speed_infill = =math.ceil(speed_print * 55 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index bba4afe562..9f4c534c86 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -35,8 +35,7 @@ speed_travel = 150 speed_wall_0 = =math.ceil(speed_print * 15 / 55) speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 -support_bottom_distance = 0.65 support_enable = True -support_top_distance = 0.5 -support_z_distance = =layer_height * 2 +support_z_distance = 0.5 +support_bottom_distance = 0.65 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 85b90363e0..ec0abd5a9e 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -56,10 +56,9 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 +support_z_distance = =layer_height * 2 support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 travel_avoid_distance = 3 wall_0_inset = 0 speed_wall_x = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index 1321320f7c..855f5c2288 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -47,8 +47,7 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 506c3447e5..aa17d74a70 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -46,9 +46,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index cd497b6cb6..f3a1ea0e98 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -55,9 +55,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 789b607efc..8a1fbc5a07 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -46,9 +46,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index 92bfc15b0b..b902d16032 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -55,9 +55,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 top_bottom_thickness = 1.5 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg index 5d2bd1ff90..59834b551d 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg @@ -36,9 +36,7 @@ speed_travel = 150 speed_wall_0 = =math.ceil(speed_print * 15 / 55) speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 -support_bottom_distance = 0.55 support_enable = True -support_top_distance = 0.55 -support_z_distance = =layer_height * 2 +support_z_distance = 0.55 top_bottom_thickness = 1.2 speed_infill = =math.ceil(speed_print * 55 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg index 3e0c8530f3..ee0a2bd2a5 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg @@ -34,8 +34,7 @@ speed_travel = 150 speed_wall_0 = =math.ceil(speed_print * 15 / 55) speed_wall_x = =math.ceil(speed_print * 40 / 55) support_angle = 45 -support_bottom_distance = 0.65 support_enable = True -support_top_distance = 0.5 -support_z_distance = =layer_height * 2 +support_z_distance = 0.5 +support_bottom_distance = 0.65 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index ee9fe2140f..fc24da0222 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -46,9 +46,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 travel_avoid_distance = 3 wall_0_inset = 0 speed_wall_x = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index 7dee4b485e..dde91c441c 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -46,8 +46,7 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index 4a78f43359..1b3024f709 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -45,9 +45,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index f888b22fd6..6784ae2adb 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -45,9 +45,8 @@ speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 +support_bottom_distance = =support_z_distance / 2 top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 30d20139e1..7a69d14931 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 50 / 50) speed_wall_0 = =math.ceil(speed_wall * 40 / 50) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index e213684360..e7b6c725dd 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_travel = 250 speed_wall = =math.ceil(speed_print * 45 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 70c1b4afaa..fb2e0330ef 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -40,6 +40,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_travel = 250 speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index bd452fc538..074270e0ec 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_travel = 250 speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index fd195c841d..df4ea5ffab 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -49,7 +49,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index cada630bb9..5d01ce5f28 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -47,7 +47,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 1e7f439fac..dd6b9063b9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -49,7 +49,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 2e7057947e..7bed5ac6d2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -46,7 +46,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index ac2429595d..4a92c4e0ef 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -30,6 +30,5 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index cfe6b1bf0a..58a7da1b9d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -32,6 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_infill = =math.ceil(speed_print * 40 / 50) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 45125d5893..901db7e3ab 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -32,6 +32,5 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 0ae86ae243..5ac58234fd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -33,7 +33,6 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 8112cd6fb0..0975a2dcaa 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -34,7 +34,6 @@ retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) speed_infill = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 76ad9235ba..a18414cf7e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -33,7 +33,6 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index b1c73cd9cb..9d5a364a53 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -42,7 +42,6 @@ speed_travel = 300 speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 2585eb3ebf..07c6aa807e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -44,7 +44,6 @@ speed_wall = =speed_print speed_wall_x = =speed_print speed_infill = =speed_print support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index c020e5a80a..bc8a252e97 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -42,7 +42,6 @@ speed_travel = 300 speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index c5d46f2118..5ac88c13bc 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -22,4 +22,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index a581965c9b..bc3928bab4 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -22,4 +22,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index 4d390412d1..9dd15079c7 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index 5c7e0a89a0..7e22a08939 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg index d3a3b5594f..d7003ca582 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg index 4768e692d5..3fb4c5ea46 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -21,4 +21,4 @@ support_interface_height = 0.9 support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index b007c1cda4..f52206e9b3 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -21,4 +21,4 @@ support_infill_sparse_thickness = 0.3 support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 6c7119b683..886807a836 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -39,7 +39,6 @@ speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index b933ae005b..35c97346bb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_wall = =math.ceil(speed_print * 50 / 50) speed_wall_0 = =math.ceil(speed_wall * 40 / 50) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index 526e12bfe0..e6270bd4c5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 45 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index be5d77a69e..ef8cb6847a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -37,9 +37,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) - speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index bc16d73c04..4f99061468 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -37,9 +37,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) - speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 01a67d5e0c..c5c3570350 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -47,7 +47,6 @@ speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index dd9e932c32..2c9f109400 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -42,10 +42,8 @@ skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) - speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 87e4c43f76..02454a7203 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -45,10 +45,8 @@ skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) - speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 93196d462c..ce382e3dcf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -43,10 +43,8 @@ skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) - speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg index 5086d8eb32..806da07969 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -33,6 +33,5 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 2a2ea30d89..11b2706b28 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_infill = =math.ceil(speed_print * 40 / 50) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg index cef41e5cdc..5771c34f8d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -33,6 +33,5 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 1727dd8711..ad56f48c17 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -32,7 +32,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index c71f536f40..ee9576aed8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -33,7 +33,6 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) speed_infill = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 70583773b1..4f6c3fa1ed 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -31,7 +31,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index 92930eae98..2fba108a33 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 229b010d6a..2fbc3d7118 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -41,7 +41,6 @@ speed_wall = =speed_print speed_wall_x = =speed_print speed_infill = =speed_print support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 3ec91f0f9a..2e06b86620 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg index 8343bb99b9..852256ec7d 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg @@ -22,4 +22,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg index 4aa8e93a43..85e3e2530a 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg @@ -22,4 +22,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg index ed96d89bc0..5bcaf96f5f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg index 2fc9439071..7b31e48283 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg index 8d8b2a8e8a..da87e8211f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -21,4 +21,4 @@ support_infill_sparse_thickness = 0.3 support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg index 5937c5be67..7e2103043f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg index 537a0f2cac..9b1583ed51 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -19,4 +19,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg index d560e748d7..28f069a61a 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -20,4 +20,4 @@ support_infill_sparse_thickness = 0.3 support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 20d644b0ac..0ee0d7cbe9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -38,7 +38,6 @@ speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index fc2156acf5..267a36d681 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_wall = =math.ceil(speed_print * 50 / 50) speed_wall_0 = =math.ceil(speed_wall * 40 / 50) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 9a17e20047..c493b0d445 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 45 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index 1511dd698e..500f0a4428 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -40,6 +40,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 881e89d91b..ccedad12ec 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index 1137a88abf..26184e715b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -45,7 +45,6 @@ speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index d2887d38a9..f739e1c5ac 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -45,7 +45,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index deac4e0d75..aec7cc4293 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -44,10 +44,8 @@ skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) - speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 4cca702d7c..3346f39efe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -42,10 +42,8 @@ skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) - speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 4b126d98be..53f58530b9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -32,6 +32,5 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 7f3b35fa36..b5a7bf5de0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_infill = =math.ceil(speed_print * 40 / 50) -support_bottom_distance = =support_z_distance support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 072880b756..4dcbf91e6a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -33,7 +33,5 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) -support_bottom_distance = =support_z_distance - support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 6ac4b46773..e6f87c3442 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -32,7 +32,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 20b1255a88..324b121ca7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -33,7 +33,6 @@ retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) speed_infill = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index be840f56b1..67cd7d50ac 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -31,7 +31,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 0cdd20604a..e132129969 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 3e85f26972..410d07b902 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -40,7 +40,6 @@ speed_wall = =speed_print speed_wall_x = =speed_print speed_infill = =speed_print support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 9ea2343841..c4d48a2f6c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 23 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 -support_bottom_distance = =support_z_distance switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg index 95b2856700..cdb8384f68 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg @@ -22,4 +22,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg index 23db0e35cb..f69ecfbb94 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg @@ -22,4 +22,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg index c14da45c48..17b3dd2467 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg index fb8e3e065b..47dcbe57fa 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg index 49c15b95ee..5159a13173 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -23,4 +23,4 @@ support_interface_height = 1.2 support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg index 910aeb9b96..0259c3040f 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg @@ -20,4 +20,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg index 893f1674bc..c1768abc54 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -19,4 +19,4 @@ support_brim_enable = True support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg index d0df2dca43..315ee5748f 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -20,4 +20,4 @@ support_infill_sparse_thickness = 0.3 support_interface_enable = True skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -support_use_towers = True
\ No newline at end of file +support_use_towers = True |