Cleaned up of the support settings for the S3 quality modes.

Relates to PP-108

30 files changed, 0 insertions, 54 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 071db69a43..6c7119b683 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -41,7 +41,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
index af2a491912..b9fb0ce221 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
@@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
index b836a5ac75..1aef0a2e54 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
@@ -26,13 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
index a4ac385d1c..748cde5bf7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -24,14 +24,8 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
index 76a16f87df..fe3cecf254 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
@@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = 0.3
 support_bottom_distance = 0.3
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 5190288662..01a67d5e0c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -49,7 +49,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index 5467595bd3..dd9e932c32 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -47,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index c694b5db79..87e4c43f76 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -50,7 +50,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index 5287ce24c4..93196d462c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -48,7 +48,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
index 6af1fe5ae6..d6887f655d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 30cd2da9b0..c333d0e4b1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
index 8d54246f13..1491af9743 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
@@ -25,7 +25,6 @@ material_shrinkage_percentage_xy = 100.2
 material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
index f650f796bc..fdad9fc5df 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -26,7 +26,6 @@ material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
index a9a14307f1..9f12894816 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -25,7 +25,6 @@ material_shrinkage_percentage_xy = 100.2
 material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index 14a7451bcc..1727dd8711 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -33,7 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index c466b76c1c..c71f536f40 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index 804149a584..70583773b1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -32,7 +32,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
index 7551e2e39f..622bc635c7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -32,5 +32,4 @@ speed_topbottom = =round(speed_print * 35 / 45)
 speed_wall = =round(speed_print * 40 / 45)
 speed_wall_0 = =round(speed_print * 35 / 45)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
index bc1b444d93..f20bde1f59 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -34,5 +34,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25/ 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index 4b6aa5629a..d4a02e65e8 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -35,5 +35,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35)
 speed_wall = =math.ceil(speed_print * 25/ 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index ab71a4c37e..92930eae98 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index ac2181d373..229b010d6a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -42,7 +42,6 @@ speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index e4bb128599..3ec91f0f9a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
index 8bd0e5d375..6bbccd8acb 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -18,4 +18,3 @@ material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
-support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
index c1cbac87a0..b1ffea8db0 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -16,4 +16,3 @@ brim_replaces_support = False
 material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
-support_interface_height = 0.9
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
index b5e22bef62..96a9b73ea5 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -17,4 +17,3 @@ material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
-support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
index f015b749d2..10d8666ade 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
index 88b079b388..5a9f03349a 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
index 8f6492f82d..237eda83e3 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
index b8e45c49fb..c561977e5b 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4