Update existing profiles

The Tronxy community has requested the removal of "max feedrate" settings in the slicer profile. The machines are usually run on one of three firmwares and these limitations really hinder slicer performance.

7 files changed, 32 insertions, 73 deletions

diff --git a/resources/definitions/tronxy_d01.def.json b/resources/definitions/tronxy_d01.def.json
index ff8badd355..141414f85f 100644
--- a/resources/definitions/tronxy_d01.def.json
+++ b/resources/definitions/tronxy_d01.def.json
@@ -5,7 +5,6 @@
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -23,15 +22,8 @@
         "gantry_height": { "value": 30 },
 
         "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y220.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y220.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish" },
+        "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
 
-        "machine_max_feedrate_x": { "value": 150 },
-        "machine_max_feedrate_y": { "value": 150 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 120 },
-        "machine_max_acceleration_x": { "value": 150 },
-        "machine_max_acceleration_y": { "value": 150 },
-        "machine_max_acceleration_z": { "value": 150 },
-        "machine_max_acceleration_e": { "value": 150 },
         "machine_acceleration": { "value": 120 }
     }
 }
diff --git a/resources/definitions/tronxy_x5sa.def.json b/resources/definitions/tronxy_x5sa.def.json
index 0e70dd72b4..a4ca9a510a 100644
--- a/resources/definitions/tronxy_x5sa.def.json
+++ b/resources/definitions/tronxy_x5sa.def.json
@@ -1,11 +1,10 @@
 {
-    "name": "Tronxy X5SA/X5ST/Pro",
+    "name": "Tronxy X5SA/X5ST/Pro/2E/D01 Plus",
     "version": 2,
     "inherits": "tronxy_x",
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -21,8 +20,11 @@
             ]
         },
         "gantry_height": { "value": 40 },
+        "retraction_amount": { "value": 4.5 },
 
-        "machine_start_gcode": { "default_value": "; X5SA Pro Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
-        "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y0\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" }
+        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+        "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" },
+
+        "machine_acceleration": { "value": 150 }
     }
 }
diff --git a/resources/definitions/tronxy_x5sa_400.def.json b/resources/definitions/tronxy_x5sa_400.def.json
index 5604b17619..d1448a3287 100644
--- a/resources/definitions/tronxy_x5sa_400.def.json
+++ b/resources/definitions/tronxy_x5sa_400.def.json
@@ -1,11 +1,10 @@
 {
-    "name": "Tronxy X5SA/X5ST/Pro 400",
+    "name": "Tronxy X5SA/X5ST/Pro/2E 400mm",
     "version": 2,
     "inherits": "tronxy_x",
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -21,13 +20,11 @@
             ]
         },
         "gantry_height": { "value": 40 },
+        "retraction_amount": { "value": 6.5 },
 
-        "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\nG1 Z2.0 F3000 ; Move Z Axis up little to preventscratching of Heat Bed\nG1 X1 Y20 Z0.3 F3600.0 ; Move to start position\nG1 X1 Y370.0 Z0.3 F1500.0 E25 ; Draw the first line\nG1 X1.6 Y370.0 Z0.3 F3600.0 ; Move to side a little\nG1 X1.6 Y20 Z0.3 F1500.0 E50 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F3600.0 ; Move over to prevent blob squish"},
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" },
+        "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y290 F1500.0 E15 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E30 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+        "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" },
 
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 120 }
+        "machine_acceleration": { "value": 150 }
     }
-}
+}
\ No newline at end of file
diff --git a/resources/definitions/tronxy_x5sa_500.def.json b/resources/definitions/tronxy_x5sa_500.def.json
index b68a954115..44f8d1ba1a 100644
--- a/resources/definitions/tronxy_x5sa_500.def.json
+++ b/resources/definitions/tronxy_x5sa_500.def.json
@@ -1,11 +1,10 @@
 {
-    "name": "Tronxy X5SA/X5ST/Pro 500",
+    "name": "Tronxy X5SA/X5ST/Pro/2E 500mm",
     "version": 2,
     "inherits": "tronxy_x",
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -21,13 +20,11 @@
             ]
         },
         "gantry_height": { "value": 40 },
+        "retraction_amount": { "value": 6.5 },
 
-        "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n "},
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 \nG1 E-2 Z0.2 F2400 \nG1 X5 Y5 F3000\nG1 Z10\nG90\n\nG1 X0 Y0 \nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E \n" },
+        "machine_start_gcode": { "default_value": "; X5SA Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y290 F1500.0 E15 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E30 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+        "machine_end_gcode": { "default_value": "G91 ; Set Positioning to Relative\nM83 ; Set Extruder to Relative\nG92 E0 ; Reset Extruder\nG1 E-4 F3000 ; Retract 4mm of filament\nG1 Z0.2 ; Raise nozzle .2mm\nG90 ; Set positioning to absolute\nG1 X{machine_width} Y{machine_depth} ; Park print head\nG91 ; Set Positioning to RelativeG1 Z10 ; Raise nozzle 10mm\nM106 S0 ; Turn off part fan\nM104 S0 ; Set nozzle temp to zero\nM140 S0 ; set bed temp to zero\nM84 X Y Z E ; Disable X Y Z and E steppers\n" },
 
-        "machine_max_feedrate_x": { "value": 150 },
-        "machine_max_feedrate_y": { "value": 150 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 120 }
+        "machine_acceleration": { "value": 150 }
     }
 }
diff --git a/resources/definitions/tronxy_xy2.def.json b/resources/definitions/tronxy_xy2.def.json
index eaae1dbb08..ce7966fc3b 100644
--- a/resources/definitions/tronxy_xy2.def.json
+++ b/resources/definitions/tronxy_xy2.def.json
@@ -5,7 +5,6 @@
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -21,18 +20,11 @@
             ]
         },
         "gantry_height": { "value": 40 },
+        "retraction_amount": { "value": 4.5 },
 
-        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
-        "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0 ;Turn-off fan\nM104 S0\nM140 S0\n\nM84 X Y E\n" },
+        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+        "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
 
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 120 },
-        "machine_max_acceleration_x": { "value": 150 },
-        "machine_max_acceleration_y": { "value": 150 },
-        "machine_max_acceleration_z": { "value": 150 },
-        "machine_max_acceleration_e": { "value": 150 },
-        "machine_acceleration": { "value": 80 }
+        "machine_acceleration": { "value": 150 }
     }
 }
diff --git a/resources/definitions/tronxy_xy2pro.def.json b/resources/definitions/tronxy_xy2pro.def.json
index 59e727bbb0..fb2bd70ea3 100644
--- a/resources/definitions/tronxy_xy2pro.def.json
+++ b/resources/definitions/tronxy_xy2pro.def.json
@@ -1,11 +1,10 @@
 {
-    "name": "Tronxy XY-2 Pro",
+    "name": "Tronxy XY-2 Pro/Pro 2E/XY3 SE",
     "version": 2,
     "inherits": "tronxy_x",
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -21,23 +20,11 @@
             ]
         },
         "gantry_height": { "value": 40 },
+        "retraction_amount": { "value": 4.5 },
 
-        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
-        "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" },
+        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+        "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
 
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 120 },
-
-        "machine_max_acceleration_x": { "value": 120 },
-        "machine_max_acceleration_y": { "value": 120 },
-        "machine_max_acceleration_z": { "value": 120 },
-        "machine_max_acceleration_e": { "value": 120 },
-        "machine_acceleration": { "value": 150 },
-
-        "machine_max_jerk_xy": { "value": 20 },
-        "machine_max_jerk_z": { "value": 0.4 },
-        "machine_max_jerk_e": { "value": 5 }
+        "machine_acceleration": { "value": 150 }
     }
 }
diff --git a/resources/definitions/tronxy_xy3.def.json b/resources/definitions/tronxy_xy3.def.json
index db03c344f5..941ca7142f 100644
--- a/resources/definitions/tronxy_xy3.def.json
+++ b/resources/definitions/tronxy_xy3.def.json
@@ -1,11 +1,10 @@
 {
-    "name": "Tronxy XY-3",
+    "name": "Tronxy XY-3/Pro",
     "version": 2,
     "inherits": "tronxy_x",
     "metadata": {
         "quality_definition": "tronxy_x",
         "visible": true,
-        "author": "AdderMk2",
         "platform": "tronxy.stl"
     },
     "overrides": {
@@ -21,18 +20,11 @@
             ]
         },
         "gantry_height": { "value": 30 },
+        "retraction_amount": { "value": 5 },
 
-        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21\nG90\nM82\nM107 T0\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T0\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0} T0\nG28\nG92 E0\n"},
-        "machine_end_gcode": { "default_value": "G91\nG1 E-2 F3000\nG1 E-2 Z0.2 F1200\nG1 X5 Y5 F3600\nG1 Z10\nG90\nG1 X0 Y{machine_depth}\nM106 S0\nM104 S0\nM140 S0\n\nM84 X Y E\n" },
+        "machine_start_gcode": { "default_value": "; XY-2 Start Code\nG21 ; Set units to millimeters\nG90 ; Set all axis to Absolute\nM82 ; Set extrusion to Absolute\nM107 ; Disable all fans\nM190 S{material_bed_temperature_layer_0} ; Set bed temperature and wait\nG28 ; Home all axis\n; Uncomment the line below to enable ABL Mesh probing\n;G29 ; Probe bed mesh for ABL\n; For best results do not run nozzle heater while performing ABL\nG1 Z5.0 ; Raise nozzle to prevent scratching of heat bed\nG1 X0 Y0 ; Move nozzle to Home before heating\nM109 S{material_print_temperature_layer_0} T0 ; Set nozzle temp and wait\nG92 E0 ; Set Extruder position to zero\n; Uncomment the following lines to enable nozzle purge line along left edge of bed\n;G1 Z2.0 F3000 ; Raise Z axis\n;G1 X1.1 Y20 Z0.2 F3600.0 ; Move to purge line start position\n;G1 Y220 F1500.0 E10 ; Draw first purge line\n;G1 X1.4 F3600.0 ; Move to side\n;G1 Y20 F1500.0 E20 ; Draw second purge line\n;G92 E0 ; Reset Extruder\n;G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n;G1 X5 Y20 Z0.2 F3600.0 ; Move over to finish nozzle wipe\n;G92 E0\n"},
+        "machine_end_gcode": { "default_value": "M83 ; Set extrder to Relative\nG1 E-5 F3000 ; Retract 5mm of filament at 50mm/s\nG90 ; Set all axis to Absolute \nG1 X0 Y{machine_depth} ; Park print head\nG1 Z10 ; Move up 10mm\nM106 S0 ; Set fan speed to 0\nM104 S0 ; Set bed temp to 0\nM140 S0 ; Set Nozzle temp to 0\nM84 ; Disable all stepper motors\n" },
 
-        "machine_max_feedrate_x": { "value": 100 },
-        "machine_max_feedrate_y": { "value": 100 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 120 },
-        "machine_max_acceleration_x": { "value": 150 },
-        "machine_max_acceleration_y": { "value": 150 },
-        "machine_max_acceleration_z": { "value": 150 },
-        "machine_max_acceleration_e": { "value": 150 },
-        "machine_acceleration": { "value": 80 }
+        "machine_acceleration": { "value": 150 }
     }
 }