diff options
| author | Ghostkeeper <rubend@tutanota.com> | 2019-10-18 19:38:16 +0300 |
|---|---|---|
| committer | Ghostkeeper <rubend@tutanota.com> | 2019-10-18 19:38:16 +0300 |
| commit | 4a5673746c5e53bbc9cd4265f5c5a0dd3cf1c2c1 (patch) | |
| tree | 5971ce93fcc8f6ab45ec0b3fedf758a592955b51 | |
| parent | 15ea29924a856e4073c41c0665a3c4e6cc5ee092 (diff) | |
Remove unused default_value overrides
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all.
Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data.
In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors.
Done during Turbo Testing & Tooling. I want to go home for the weekend now...
77 files changed, 24 insertions, 874 deletions
diff --git a/resources/definitions/101Hero.def.json b/resources/definitions/101Hero.def.json index a77ea5ed97..d356d15da9 100644 --- a/resources/definitions/101Hero.def.json +++ b/resources/definitions/101Hero.def.json @@ -34,7 +34,6 @@ }, "speed_print": { "default_value": 14 }, "speed_travel": { "value": "speed_print" }, - "speed_infill": { "default_value": 14 }, "speed_wall": { "value": "speed_print * 0.7" }, "speed_topbottom": { "value": "speed_print * 0.7" }, "speed_layer_0": { "value": "speed_print * 0.7" }, diff --git a/resources/definitions/3dator.def.json b/resources/definitions/3dator.def.json index 901ea87510..ac37523379 100644 --- a/resources/definitions/3dator.def.json +++ b/resources/definitions/3dator.def.json @@ -17,15 +17,10 @@ "overrides": { "machine_name": { "default_value": "3Dator" }, - "speed_travel": { "default_value": 120 }, "prime_tower_size": { "default_value": 8.660254037844387 }, "infill_sparse_density": { "default_value": 20 }, - "speed_wall_x": { "default_value": 45 }, - "speed_wall_0": { "default_value": 40 }, - "speed_topbottom": { "default_value": 35 }, "layer_height": { "default_value": 0.2 }, "speed_print": { "default_value": 50 }, - "speed_infill": { "default_value": 60 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, "machine_height": { "default_value": 260 }, @@ -33,8 +28,6 @@ "machine_depth": { "default_value": 170 }, "machine_width": { "default_value": 180 }, "retraction_speed": {"default_value":100}, - "cool_fan_speed_min": {"default_value": 20}, - "cool_fan_speed_max": {"default_value": 70}, "adhesion_type": { "default_value": "none" }, "machine_head_with_fans_polygon": { "default_value": [ diff --git a/resources/definitions/Mark2_for_Ultimaker2.def.json b/resources/definitions/Mark2_for_Ultimaker2.def.json index b02dc78adf..1aca2a3844 100644 --- a/resources/definitions/Mark2_for_Ultimaker2.def.json +++ b/resources/definitions/Mark2_for_Ultimaker2.def.json @@ -79,9 +79,6 @@ "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" }, - "speed_layer_0": { - "default_value": 20 - }, "speed_support": { "value": "speed_wall_0" }, @@ -107,22 +104,18 @@ "default_value": 25 }, "switch_extruder_retraction_amount": { - "default_value": 0, "value": "retraction_amount", "enabled": false }, "switch_extruder_retraction_speeds": { - "default_value": 25, "value": "retraction_speed", "enabled": false }, "switch_extruder_retraction_speed": { - "default_value": 25, "value": "retraction_retract_speed", "enabled": false }, "switch_extruder_prime_speed": { - "default_value": 25, "value": "retraction_prime_speed", "enabled": false }, @@ -142,11 +135,9 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode" : { - "default_value": "", "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 Z0; home all\\nG28 X0 Y0\\nG0 Z20 F2400 ;move the platform to 20mm\\nG92 E0\\nM190 S{material_bed_temperature_layer_0}\\nM109 T0 S{material_standby_temperature, 0}\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nT1 ; move to the 2th head\\nG0 Z20 F2400\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-5.1 F1500 ; retract\\nG1 X90 Z0.01 F5000 ; move away from the prime poop\\nG1 X50 F9000\\nG0 Z20 F2400\\nT0 ; move to the first head\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM104 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 X60 Z0.01 F5000 ; move away from the prime poop\\nG1 X20 F9000\\nM400 ;finish all moves\\nG92 E0\\n;end of startup sequence\\n\"" }, "machine_end_gcode" : { - "default_value": "", "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\"" }, "machine_extruder_count": { @@ -158,12 +149,10 @@ }, "acceleration_print": { - "default_value": 2000, "value": "2000" }, "acceleration_travel": { - "default_value": 3000, "value": "acceleration_print if magic_spiralize else 3000" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, @@ -183,7 +172,6 @@ }, "jerk_travel": { - "default_value": 20, "value": "jerk_print if magic_spiralize else 20" }, "jerk_layer_0": { "value": "jerk_topbottom" }, diff --git a/resources/definitions/abax_pri3.def.json b/resources/definitions/abax_pri3.def.json index 1ab48b865a..529636be90 100644 --- a/resources/definitions/abax_pri3.def.json +++ b/resources/definitions/abax_pri3.def.json @@ -49,33 +49,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, - "material_print_temperature": { - "default_value": 200 - }, - "material_bed_temperature": { - "default_value": 0 - }, "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 70 - }, - "speed_wall": { - "default_value": 25 - }, - "speed_topbottom": { - "default_value": 15 - }, - "speed_travel": { - "default_value": 150 - }, - "speed_layer_0": { - "default_value": 30 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/abax_pri5.def.json b/resources/definitions/abax_pri5.def.json index 46229ce756..9e4e7e3b20 100644 --- a/resources/definitions/abax_pri5.def.json +++ b/resources/definitions/abax_pri5.def.json @@ -49,33 +49,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, - "material_print_temperature": { - "default_value": 200 - }, - "material_bed_temperature": { - "default_value": 0 - }, "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 70 - }, - "speed_wall": { - "default_value": 25 - }, - "speed_topbottom": { - "default_value": 15 - }, - "speed_travel": { - "default_value": 150 - }, - "speed_layer_0": { - "default_value": 30 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/abax_titan.def.json b/resources/definitions/abax_titan.def.json index 9f67117d6c..98643df22b 100644 --- a/resources/definitions/abax_titan.def.json +++ b/resources/definitions/abax_titan.def.json @@ -49,33 +49,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, - "material_print_temperature": { - "default_value": 200 - }, - "material_bed_temperature": { - "default_value": 0 - }, "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 70 - }, - "speed_wall": { - "default_value": 25 - }, - "speed_topbottom": { - "default_value": 15 - }, - "speed_travel": { - "default_value": 150 - }, - "speed_layer_0": { - "default_value": 30 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/alfawise_u20.def.json b/resources/definitions/alfawise_u20.def.json index 748bf8797a..4da42fdb1d 100644 --- a/resources/definitions/alfawise_u20.def.json +++ b/resources/definitions/alfawise_u20.def.json @@ -47,12 +47,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 210 - }, - "material_bed_temperature": { - "default_value": 50 - }, "layer_height_0": { "default_value": 0.2 }, @@ -62,21 +56,6 @@ "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 20 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/alfawise_u30.def.json b/resources/definitions/alfawise_u30.def.json index 44caf61d1a..e05536f66c 100644 --- a/resources/definitions/alfawise_u30.def.json +++ b/resources/definitions/alfawise_u30.def.json @@ -22,16 +22,9 @@ "default_value": "; -- END GCODE --\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F80 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ;turn the fan off; -- end of END GCODE --" }, "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { "default_value": 210 }, - "material_bed_temperature": { "default_value": 50 }, "layer_height_0": { "default_value": 0.2 }, "wall_thickness": { "default_value": 1.2 }, "speed_print": { "default_value": 40 }, - "speed_infill": { "default_value": 50 }, - "speed_wall": { "default_value": 35 }, - "speed_topbottom": { "default_value": 35 }, - "speed_travel": { "default_value": 120 }, - "speed_layer_0": { "default_value": 20 }, "support_enable": { "default_value": true }, "retraction_enable": { "default_value": true }, "retraction_amount": { "default_value": 5 }, diff --git a/resources/definitions/bfb.def.json b/resources/definitions/bfb.def.json index d1dfa9ef1b..e88c8c792b 100644 --- a/resources/definitions/bfb.def.json +++ b/resources/definitions/bfb.def.json @@ -15,26 +15,19 @@ }, "overrides": { - "speed_topbottom": { "default_value": 40 }, "speed_print": { "default_value": 40 }, "machine_extruder_count": { "default_value": 1 }, "prime_tower_size": { "default_value": 7.745966692414834 }, "machine_name": { "default_value": "BFB_Test" }, "machine_heated_bed": { "default_value": false }, - "speed_layer_0": { "default_value": 25 }, "machine_width": { "default_value": 275 }, "machine_gcode_flavor": { "default_value": "BFB" }, "machine_depth": { "default_value": 265 }, - "speed_infill": { "default_value": 30 }, "machine_center_is_zero": { "default_value": true }, "machine_height": { "default_value": 240 }, "layer_height": { "default_value": 0.25 }, - "material_print_temperature": { "default_value": 200 }, "retraction_amount": { "default_value": 0.05 }, - "speed_wall_0": { "default_value": 25 }, - "speed_travel": { "default_value": 50 }, "infill_sparse_density": { "default_value": 10 }, - "layer_height_0": { "default_value": 0.5 }, - "speed_wall_x": { "default_value": 20 } + "layer_height_0": { "default_value": 0.5 } } } diff --git a/resources/definitions/bq_hephestos.def.json b/resources/definitions/bq_hephestos.def.json index be024cd6fa..d9e84dae87 100644 --- a/resources/definitions/bq_hephestos.def.json +++ b/resources/definitions/bq_hephestos.def.json @@ -54,33 +54,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, - "material_print_temperature": { - "default_value": 220 - }, - "material_bed_temperature": { - "default_value": 0 - }, "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 20 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/bq_hephestos_2.def.json b/resources/definitions/bq_hephestos_2.def.json index 90a86433fb..5c122eb9a4 100644 --- a/resources/definitions/bq_hephestos_2.def.json +++ b/resources/definitions/bq_hephestos_2.def.json @@ -24,26 +24,14 @@ "machine_height": { "default_value": 220 }, "machine_heated_bed": { "default_value": false }, "machine_center_is_zero": { "default_value": false }, - "material_print_temperature": { "default_value": 210 }, - "material_bed_temperature": { "default_value": 0 }, "layer_height": { "default_value": 0.2 }, "layer_height_0": { "default_value": 0.2 }, - "wall_line_count": { "default_value": 3 }, "wall_thickness": { "default_value": 1.2 }, "top_bottom_thickness": { "default_value": 1.2 }, "infill_sparse_density": { "default_value": 20 }, - "infill_overlap": { "default_value": 15 }, "speed_print": { "default_value": 60 }, - "speed_travel": { "default_value": 160 }, - "speed_layer_0": { "default_value": 30 }, - "speed_wall_x": { "default_value": 35 }, - "speed_wall_0": { "default_value": 30 }, - "speed_infill": { "default_value": 80 }, - "speed_topbottom": { "default_value": 35 }, - "skirt_brim_speed": { "default_value": 35 }, "skirt_line_count": { "default_value": 4 }, "skirt_brim_minimal_length": { "default_value": 30 }, - "skirt_gap": { "default_value": 6 }, - "cool_fan_full_at_height": { "default_value": 0.4 } + "skirt_gap": { "default_value": 6 } } } diff --git a/resources/definitions/bq_hephestos_xl.def.json b/resources/definitions/bq_hephestos_xl.def.json index a8d63cbb41..16d0953bf1 100644 --- a/resources/definitions/bq_hephestos_xl.def.json +++ b/resources/definitions/bq_hephestos_xl.def.json @@ -53,33 +53,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, - "material_print_temperature": { - "default_value": 220 - }, - "material_bed_temperature": { - "default_value": 0 - }, "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 20 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/bq_witbox.def.json b/resources/definitions/bq_witbox.def.json index b96da6179c..fce2af9f97 100644 --- a/resources/definitions/bq_witbox.def.json +++ b/resources/definitions/bq_witbox.def.json @@ -54,33 +54,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, - "material_print_temperature": { - "default_value": 220 - }, - "material_bed_temperature": { - "default_value": 0 - }, "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 20 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/bq_witbox_2.def.json b/resources/definitions/bq_witbox_2.def.json index 7412647852..d1114aafd6 100644 --- a/resources/definitions/bq_witbox_2.def.json +++ b/resources/definitions/bq_witbox_2.def.json @@ -41,21 +41,12 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, - "material_print_temperature": { - "default_value": 210 - }, - "material_bed_temperature": { - "default_value": 0 - }, "layer_height": { "default_value": 0.2 }, "layer_height_0": { "default_value": 0.2 }, - "wall_line_count": { - "default_value": 3 - }, "wall_thickness": { "default_value": 1.2 }, @@ -65,33 +56,9 @@ "infill_sparse_density": { "default_value": 20 }, - "infill_overlap": { - "default_value": 15 - }, "speed_print": { "default_value": 60 }, - "speed_travel": { - "default_value": 160 - }, - "speed_layer_0": { - "default_value": 30 - }, - "speed_wall_x": { - "default_value": 35 - }, - "speed_wall_0": { - "default_value": 30 - }, - "speed_infill": { - "default_value": 80 - }, - "speed_topbottom": { - "default_value": 35 - }, - "skirt_brim_speed": { - "default_value": 35 - }, "skirt_line_count": { "default_value": 4 }, @@ -101,9 +68,6 @@ "skirt_gap": { "default_value": 6 }, - "cool_fan_full_at_height": { - "default_value": 0.4 - }, "support_enable": { "default_value": false } diff --git a/resources/definitions/builder_premium_large.def.json b/resources/definitions/builder_premium_large.def.json index d100cd1ba9..e5411027e3 100644 --- a/resources/definitions/builder_premium_large.def.json +++ b/resources/definitions/builder_premium_large.def.json @@ -35,8 +35,6 @@ "material_standby_temperature": { "value": "material_print_temperature" }, "switch_extruder_retraction_speeds": {"default_value": 15 }, - "switch_extruder_retraction_speed": {"default_value": 15 }, - "switch_extruder_prime_speed": {"default_value": 15 }, "switch_extruder_retraction_amount": {"value": 1 }, "speed_travel": { "value": "100" }, @@ -85,8 +83,6 @@ "retraction_amount": { "default_value": 3 }, "retraction_speed": { "default_value": 15 }, - "retraction_retract_speed": { "default_value": 15 }, - "retraction_prime_speed": { "default_value": 15 }, "travel_retract_before_outer_wall": { "default_value": true }, "skin_overlap": { "value": "15" }, "adhesion_type": { "default_value": "skirt" }, diff --git a/resources/definitions/builder_premium_medium.def.json b/resources/definitions/builder_premium_medium.def.json index 16aeeffdae..1817dfe7db 100644 --- a/resources/definitions/builder_premium_medium.def.json +++ b/resources/definitions/builder_premium_medium.def.json @@ -35,8 +35,6 @@ "material_standby_temperature": { "value": "material_print_temperature" }, "switch_extruder_retraction_speeds": {"default_value": 15 }, - "switch_extruder_retraction_speed": {"default_value": 15 }, - "switch_extruder_prime_speed": {"default_value": 15 }, "switch_extruder_retraction_amount": {"value": 1 }, "speed_travel": { "value": "100" }, @@ -85,8 +83,6 @@ "retraction_amount": { "default_value": 3 }, "retraction_speed": { "default_value": 15 }, - "retraction_retract_speed": { "default_value": 15 }, - "retraction_prime_speed": { "default_value": 15 }, "travel_retract_before_outer_wall": { "default_value": true }, "skin_overlap": { "value": "15" }, "adhesion_type": { "default_value": "skirt" }, diff --git a/resources/definitions/builder_premium_small.def.json b/resources/definitions/builder_premium_small.def.json index 290e79660f..f126da7752 100644 --- a/resources/definitions/builder_premium_small.def.json +++ b/resources/definitions/builder_premium_small.def.json @@ -34,8 +34,6 @@ "material_standby_temperature": { "value": "material_print_temperature" }, "switch_extruder_retraction_speeds": {"default_value": 15 }, - "switch_extruder_retraction_speed": {"default_value": 15 }, - "switch_extruder_prime_speed": {"default_value": 15 }, "switch_extruder_retraction_amount": {"value": 1 }, "speed_travel": { "value": "100" }, @@ -84,8 +82,6 @@ "retraction_amount": { "default_value": 3 }, "retraction_speed": { "default_value": 15 }, - "retraction_retract_speed": { "default_value": 15 }, - "retraction_prime_speed": { "default_value": 15 }, "travel_retract_before_outer_wall": { "default_value": true }, "skin_overlap": { "value": "15" }, "adhesion_type": { "default_value": "skirt" }, diff --git a/resources/definitions/cocoon_create_modelmaker.def.json b/resources/definitions/cocoon_create_modelmaker.def.json index 83d1f41a99..b738dc64ff 100644 --- a/resources/definitions/cocoon_create_modelmaker.def.json +++ b/resources/definitions/cocoon_create_modelmaker.def.json @@ -47,9 +47,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 220 - }, "layer_height": { "default_value": 0.10 }, @@ -65,21 +62,6 @@ "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 70 - }, - "speed_layer_0": { - "default_value": 20 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/creality_cr-x.def.json b/resources/definitions/creality_cr-x.def.json index 0117c4fffe..15bea1edf1 100644 --- a/resources/definitions/creality_cr-x.def.json +++ b/resources/definitions/creality_cr-x.def.json @@ -32,7 +32,6 @@ "adhesion_type": { "default_value": "skirt" }, "gantry_height": { "value": "30" }, "speed_print": { "default_value": 60 }, - "speed_travel": { "default_value": 120 }, "machine_max_acceleration_x": { "default_value": 500 }, "machine_max_acceleration_y": { "default_value": 500 }, "machine_max_acceleration_z": { "default_value": 100 }, @@ -43,9 +42,7 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG28 ;home all\nG90 ;absolute positioning\nM107 ;start with the fan off\nG1 F2400 Z15.0 ;raise the nozzle 15mm\nM109 S{material_print_temperature} ;Set Extruder Temperature and Wait\nM190 S{material_bed_temperature}; Wait for bed temperature to reach target temp\nT0 ;Switch to Extruder 1\nG1 F3000 X5 Y10 Z0.2 ;move to prime start position\nG92 E0 ;reset extrusion distance\nG1 F600 X160 E15 ;prime nozzle in a line\nG1 F5000 X180 ;quick wipe\nG92 E0 ;reset extrusion distance" }, "machine_end_gcode": { "default_value": "M104 S0 ;hotend off\nM140 S0 ;bed off\nG92 E0\nG1 F2000 E-100 ;retract filament 100mm\nG92 E0\nG1 F3000 X0 Y270 ;move bed for easy part removal\nM84 ;disable steppers" }, - "material_print_temperature": { "default_value": 200 }, "wall_thickness": { "default_value": 1 }, - "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { "default_value": 1 } + "top_bottom_thickness": { "default_value": 1 } } } diff --git a/resources/definitions/creatable_d3.def.json b/resources/definitions/creatable_d3.def.json index 1491089e24..f621bcbe97 100644 --- a/resources/definitions/creatable_d3.def.json +++ b/resources/definitions/creatable_d3.def.json @@ -27,14 +27,12 @@ "machine_max_feedrate_z": { "default_value": 300 }, "gantry_height": {"value": "43"}, "layer_height": { "default_value": 0.1 }, - "relative_extrusion": { "default_value": false }, + "relative_extrusion": { "value": "False" }, "retraction_combing": { "default_value": "off" }, - "retraction_hop_enabled": { "default_value": true }, + "retraction_hop_enabled": { "default_value": true }, "retraction_hop_only_when_collides": { "default_value": false }, - "retraction_retract_speed": { "default_value": 100 }, "retraction_speed": { "default_value": 100 }, "retraction_amount": { "default_value": 4.5 }, - "retraction_prime_speed": { "default_value": 45 }, "machine_start_gcode": { "default_value": "G21\nG90\nM82\nM106 S255\nG28\nG92 E0\nG1 Z100 F5000\nM190 S50\nM109 S200\nG1 X-135\nG1 Z0.3\nG92 E-32\nG1 E0 F1000\nG1 E50 F200\nG1 F1000\nG1 X-125\nG92 E0" }, diff --git a/resources/definitions/cubicon_common.def.json b/resources/definitions/cubicon_common.def.json index ae085c7552..6b1e3d953e 100644 --- a/resources/definitions/cubicon_common.def.json +++ b/resources/definitions/cubicon_common.def.json @@ -23,77 +23,34 @@ "travel_compensate_overlapping_walls_enabled": { "default_value": false }, - "travel_compensate_overlapping_walls_0_enabled": { - "default_value": false - }, - "travel_compensate_overlapping_walls_x_enabled": { - "default_value": false - }, "layer_height": { "default_value": 0.2 }, "layer_height_0": { "default_value": 0.2 }, - "infill_line_width": { - "default_value": 0.6 - }, "adhesion_type": { "default_value": "raft" }, - "roofing_pattern": { "default_value": "lines" }, "top_bottom_pattern": { "default_value": "lines" }, - "top_bottom_pattern_0": { - "default_value": "zigzag" - }, "fill_perimeter_gaps": { "default_value": "everywhere" }, - "infill_pattern": { - "default_value": "zigzag" - }, "infill_sparse_density": { "default_value": 20 }, - "infill_overlap": { - "default_value": 15 - }, "infill_before_walls": { "default_value": false }, - "infill_sparse_thickness": { "default_value": 0.2 }, "top_bottom_thickness": { "default_value": 1.0 }, - "top_thickness": { - "default_value": 1.0 - }, "bottom_thickness": { - "default_value": 0.6, "value": "top_bottom_thickness * 0.6" }, - "roofing_layer_count": { - "default_value": 1 - }, - "skin_preshrink": { "default_value": true }, "material_flow_layer_0": { "default_value": 100 }, - "top_skin_preshrink": { "default_value": 1.2 }, - "bottom_skin_preshrink": { "default_value": 1.2 }, "max_skin_angle_for_expansion": { "default_value": 90 }, - "min_skin_width_for_expansion": { "default_value": 2.7475 }, "skin_angles": { "default_value": "[135,45]" }, - "roofing_angles": { "default_value": "[135,45]" }, "coasting_volume": { "default_value": 0.032 }, "wall_thickness": { "default_value": 1.2 }, - "wall_line_count": { "default_value": 3 }, - "speed_wall_0": { "default_value": 25 }, - "skin_overlap": { "default_value": 5 }, "cool_min_layer_time_fan_speed_max": { "default_value": 15 }, "cool_min_layer_time": { "default_value": 15 }, - "support_roof_pattern": { "default_value": "zigzag" }, - "support_bottom_pattern": { "default_value": "zigzag" }, "support_interface_pattern": { "default_value": "zigzag" }, "support_pattern": { "default_value": "zigzag" }, - "retraction_amount": { "default_value": 1.5 }, - "top_layers": { - "default_value": 5 - }, - "bottom_layers": { - "default_value": 3 - } + "retraction_amount": { "default_value": 1.5 } } }
\ No newline at end of file diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json index 17e285a422..30c0abdab2 100644 --- a/resources/definitions/dagoma_discoeasy200.def.json +++ b/resources/definitions/dagoma_discoeasy200.def.json @@ -52,9 +52,6 @@ "speed_print": { "default_value": 60 }, - "speed_travel": { - "default_value": 100 - }, "retraction_amount": { "default_value": 3.5 }, diff --git a/resources/definitions/dagoma_magis.def.json b/resources/definitions/dagoma_magis.def.json index 9d2f7170c6..dc5a0f86d2 100644 --- a/resources/definitions/dagoma_magis.def.json +++ b/resources/definitions/dagoma_magis.def.json @@ -55,9 +55,6 @@ "speed_print": { "default_value": 40 }, - "speed_travel": { - "default_value": 120 - }, "retraction_amount": { "default_value": 3.8 }, diff --git a/resources/definitions/dagoma_neva.def.json b/resources/definitions/dagoma_neva.def.json index ea6046b613..43a3e0c4f1 100644 --- a/resources/definitions/dagoma_neva.def.json +++ b/resources/definitions/dagoma_neva.def.json @@ -55,9 +55,6 @@ "speed_print": { "default_value": 40 }, - "speed_travel": { - "default_value": 120 - }, "retraction_amount": { "default_value": 3.8 }, diff --git a/resources/definitions/delta_go.def.json b/resources/definitions/delta_go.def.json index cd1fb180c2..04f0580898 100644 --- a/resources/definitions/delta_go.def.json +++ b/resources/definitions/delta_go.def.json @@ -16,12 +16,8 @@ "overrides": { "machine_name": { "default_value": "Delta Go" }, "default_material_print_temperature": { "default_value": 210 }, - "speed_travel": { "default_value": 150 }, "prime_tower_size": { "default_value": 8.66 }, "infill_sparse_density": { "default_value": 10 }, - "speed_wall_x": { "default_value": 30 }, - "speed_wall_0": { "default_value": 30 }, - "speed_topbottom": { "default_value": 20 }, "layer_height": { "default_value": 0.15 }, "speed_print": { "default_value": 30 }, "machine_heated_bed": { "default_value": false }, diff --git a/resources/definitions/deltabot.def.json b/resources/definitions/deltabot.def.json index 613b61d32c..ad6a207bb2 100644 --- a/resources/definitions/deltabot.def.json +++ b/resources/definitions/deltabot.def.json @@ -15,15 +15,10 @@ }, "overrides": { - "speed_travel": { "default_value": 150 }, "prime_tower_size": { "default_value": 8.660254037844387 }, "infill_sparse_density": { "default_value": 10 }, - "speed_wall_x": { "default_value": 30 }, - "speed_wall_0": { "default_value": 30 }, - "speed_topbottom": { "default_value": 30 }, "layer_height": { "default_value": 0.2 }, "speed_print": { "default_value": 30 }, - "speed_infill": { "default_value": 30 }, "machine_extruder_count": { "default_value": 1 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": true }, diff --git a/resources/definitions/deltacomb.def.json b/resources/definitions/deltacomb.def.json index c46beeec2d..ac2ea5abe1 100755 --- a/resources/definitions/deltacomb.def.json +++ b/resources/definitions/deltacomb.def.json @@ -37,7 +37,7 @@ "retraction_amount" : { "default_value": 3.5 }, "retraction_speed" : { "default_value": 30 }, "retraction_combing" : { "default_value": "noskin" }, - "travel_avoid_distance": { "default_value": 1, "value": "1" }, + "travel_avoid_distance": { "value": "1" }, "speed_print" : { "default_value": 80 }, "speed_infill": { "value": "round(speed_print * 1.05, 0)" }, "speed_topbottom": { "value": "round(speed_print * 0.95, 0)" }, @@ -45,7 +45,7 @@ "speed_wall_0": { "value": "30" }, "speed_wall_x": { "value": "speed_wall" }, "speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" }, - "speed_travel": { "default_value": 150, "value": 150 }, + "speed_travel": { "value": 150 }, "speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" }, "skirt_brim_speed": { "value": "speed_layer_0" }, "skirt_line_count": { "default_value": 3 }, @@ -57,10 +57,10 @@ "support_z_distance": { "value": "layer_height * 2" }, "support_bottom_distance": { "value": "layer_height" }, "support_use_towers" : { "default_value": false }, - "jerk_enabled": { "default_value": 1, "value": "1" }, - "jerk_infill" : { "default_value": 5, "value": "5" }, - "jerk_support" : { "default_value": 5, "value": "5" }, - "acceleration_enabled": { "default_value": 1, "value": "1" }, + "jerk_enabled": { "value": "True" }, + "jerk_infill" : { "value": "5" }, + "jerk_support" : { "value": "5" }, + "acceleration_enabled": { "value": "1" }, "acceleration_travel" : { "value": 5000 }, "machine_max_feedrate_z" : { "default_value": 300 } } diff --git a/resources/definitions/easyarts_ares.def.json b/resources/definitions/easyarts_ares.def.json index 0e2742f484..18d73a3531 100644 --- a/resources/definitions/easyarts_ares.def.json +++ b/resources/definitions/easyarts_ares.def.json @@ -49,27 +49,9 @@ "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { - "default_value": 1 - }, "speed_print": { "default_value": 75 }, - "speed_infill": { - "default_value": 100 - }, - "speed_wall": { - "default_value": 25 - }, - "speed_topbottom": { - "default_value": 15 - }, - "speed_travel": { - "default_value": 150 - }, - "speed_layer_0": { - "default_value": 30 - }, "support_enable": { "default_value": true } diff --git a/resources/definitions/erzay3d.def.json b/resources/definitions/erzay3d.def.json index 0a6d676bea..875aea708e 100644 --- a/resources/definitions/erzay3d.def.json +++ b/resources/definitions/erzay3d.def.json @@ -56,57 +56,17 @@ "ironing_pattern": { "default_value": "concentric" }, "ironing_flow": { "default_value": 7.0 }, - "roofing_pattern": { "default_value": "concentric" }, "infill_sparse_density": { "default_value": 20 }, - "infill_line_distance": { "default_value": 4 }, "default_material_print_temperature": { "default_value": 220 }, - "material_print_temperature": { "default_value": 220 }, - "material_print_temperature_layer_0": { "default_value": 220 }, - "material_initial_print_temperature": { "default_value": 220 }, - "material_final_print_temperature": { "default_value": 220 }, "retraction_amount": { "default_value": 6.5 }, "speed_print": { "default_value": 40 }, - "speed_infill": { "default_value": 60 }, - "speed_wall": { "default_value": 20 }, - "speed_wall_0": { "default_value": 20 }, - "speed_wall_x": { "default_value": 40 }, - "speed_roofing": { "default_value": 20 }, - "speed_topbottom": { "default_value": 20 }, - "speed_support": { "default_value": 40 }, - "speed_support_infill": { "default_value": 40 }, - "speed_support_interface": { "default_value": 25 }, - "speed_support_roof": { "default_value": 25 }, - "speed_support_bottom": { "default_value": 25 }, - "speed_prime_tower": { "default_value": 40 }, - "speed_travel": { "default_value": 100 }, - "speed_layer_0": { "default_value": 20 }, - "speed_print_layer_0": { "default_value": 20 }, - "speed_travel_layer_0": { "default_value": 80 }, - "skirt_brim_speed": { "default_value": 20 }, "speed_equalize_flow_enabled": { "default_value": true }, "speed_equalize_flow_max": { "default_value": 100 }, "acceleration_print": { "default_value": 1000 }, - "acceleration_infill": { "default_value": 3000 }, - "acceleration_wall": { "default_value": 1000 }, - "acceleration_wall_0": { "default_value": 1000 }, - "acceleration_wall_x": { "default_value": 1000 }, - "acceleration_roofing": { "default_value": 1000 }, - "acceleration_topbottom": { "default_value": 1000 }, - "acceleration_support": { "default_value": 1000 }, - "acceleration_support_infill": { "default_value": 1000 }, - "acceleration_support_interface": { "default_value": 1000 }, - "acceleration_support_roof": { "default_value": 1000 }, - "acceleration_support_bottom": { "default_value": 1000 }, - "acceleration_prime_tower": { "default_value": 1000 }, - "acceleration_travel": { "default_value": 1500 }, - "acceleration_layer_0": { "default_value": 1000 }, - "acceleration_print_layer_0": { "default_value": 1000 }, - "acceleration_travel_layer_0": { "default_value": 1000 }, - "acceleration_skirt_brim": { "default_value": 1000 }, "jerk_print": { "default_value": 10 }, diff --git a/resources/definitions/fabtotum.def.json b/resources/definitions/fabtotum.def.json index 959a5bdaec..355f6a1434 100644 --- a/resources/definitions/fabtotum.def.json +++ b/resources/definitions/fabtotum.def.json @@ -50,8 +50,8 @@ "retraction_hop_enabled": { "default_value": false }, "material_final_print_temperature": { "value": "material_print_temperature - 5" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, - "travel_avoid_distance": { "default_value": 1, "value": 1 }, - "speed_travel": { "default_value": 200, "value": 200 }, + "travel_avoid_distance": { "value": 1 }, + "speed_travel": { "value": 200 }, "speed_infill": { "value": "round(speed_print * 1.05, 0)" }, "speed_topbottom": { "value": "round(speed_print * 0.95, 0)" }, "speed_wall": { "value": "speed_print" }, diff --git a/resources/definitions/felixpro2dual.def.json b/resources/definitions/felixpro2dual.def.json index 0c978cdb71..fdd8a1b694 100644 --- a/resources/definitions/felixpro2dual.def.json +++ b/resources/definitions/felixpro2dual.def.json @@ -24,7 +24,6 @@ "layer_height": { "default_value": 0.15 }, "layer_height_0": { "default_value": 0.2 }, - "speed_layer_0": { "default_value": 20}, "infill_sparse_density": { "default_value": 20 }, "wall_thickness": { "default_value": 1 }, @@ -53,7 +52,6 @@ "machine_center_is_zero": { "default_value": false }, "speed_print": { "default_value": 80 }, - "speed_travel": { "default_value": 200 }, "retraction_amount": { "default_value": 1 }, "retraction_speed": { "default_value": 50}, diff --git a/resources/definitions/felixtec4dual.def.json b/resources/definitions/felixtec4dual.def.json index ba5bcfa112..efc13c1759 100644 --- a/resources/definitions/felixtec4dual.def.json +++ b/resources/definitions/felixtec4dual.def.json @@ -39,7 +39,6 @@ "machine_center_is_zero": { "default_value": false }, "speed_print": { "default_value": 60 }, - "speed_travel": { "default_value": 200 }, "retraction_amount": { "default_value": 1 }, "retraction_speed": { "default_value": 50}, diff --git a/resources/definitions/flsun_qq_s.def.json b/resources/definitions/flsun_qq_s.def.json index 5a739e9ae1..6b10a7f0cc 100644 --- a/resources/definitions/flsun_qq_s.def.json +++ b/resources/definitions/flsun_qq_s.def.json @@ -33,14 +33,8 @@ "z_seam_type": { "default_value": "back" }, - "top_thickness": { - "default_value": 5 - }, - "bottom_layers": { - "default_value": 4 - }, "gantry_height": { - "default_value": 0 + "value": "0" }, "machine_nozzle_size": { "default_value": 0.4 diff --git a/resources/definitions/geeetech_a30.def.json b/resources/definitions/geeetech_a30.def.json index 3d8823f438..52b6ad8f7f 100644 --- a/resources/definitions/geeetech_a30.def.json +++ b/resources/definitions/geeetech_a30.def.json @@ -42,9 +42,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_bed_temperature": { - "default_value": 60 - }, "machine_nozzle_size": { "default_value": 0.4 }, @@ -60,12 +57,6 @@ "retraction_speed": { "default_value": 25 }, - "retraction_retract_speed": { - "default_value": 25 - }, - "retraction_prime_speed": { - "default_value": 25 - }, "adhesion_type": { "default_value": "skirt" }, @@ -86,7 +77,7 @@ ] }, "gantry_height": { - "default_value": 55 + "value": "55" }, "machine_max_feedrate_x": { "default_value": 300 diff --git a/resources/definitions/gmax15plus.def.json b/resources/definitions/gmax15plus.def.json index eb576f0e19..b5e0efe27c 100644 --- a/resources/definitions/gmax15plus.def.json +++ b/resources/definitions/gmax15plus.def.json @@ -39,7 +39,6 @@ "adhesion_type": { "default_value": "skirt" }, "gantry_height": { "value": "50" }, "speed_print": { "default_value": 50 }, - "speed_travel": { "default_value": 70 }, "machine_max_acceleration_x": { "default_value": 600 }, "machine_max_acceleration_y": { "default_value": 600 }, "machine_max_acceleration_z": { "default_value": 30 }, @@ -50,9 +49,7 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} ; Preheat\nM109 S{material_print_temperature} ; Preheat\nG91 ;relative positioning\nG90 ;absolute positioning\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" }, - "material_print_temperature": { "default_value": 202 }, "wall_thickness": { "default_value": 1 }, - "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { "default_value": 1 } + "top_bottom_thickness": { "default_value": 1 } } } diff --git a/resources/definitions/gmax15plus_dual.def.json b/resources/definitions/gmax15plus_dual.def.json index 40a3dde303..89ffda490a 100644 --- a/resources/definitions/gmax15plus_dual.def.json +++ b/resources/definitions/gmax15plus_dual.def.json @@ -37,7 +37,6 @@ "adhesion_type": { "default_value": "skirt" }, "gantry_height": { "value": "50" }, "speed_print": { "default_value": 50 }, - "speed_travel": { "default_value": 70 }, "machine_max_acceleration_x": { "default_value": 600 }, "machine_max_acceleration_y": { "default_value": 600 }, "machine_max_acceleration_z": { "default_value": 30 }, @@ -48,9 +47,7 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" }, - "material_print_temperature": { "default_value": 202 }, "wall_thickness": { "default_value": 1 }, - "top_bottom_thickness": { "default_value": 1 }, - "bottom_thickness": { "default_value": 1 } + "top_bottom_thickness": { "default_value": 1 } } } diff --git a/resources/definitions/helloBEEprusa.def.json b/resources/definitions/helloBEEprusa.def.json index 65716ac175..2c8c4839d0 100644 --- a/resources/definitions/helloBEEprusa.def.json +++ b/resources/definitions/helloBEEprusa.def.json @@ -26,28 +26,15 @@ "machine_height": { "default_value": 190 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, - "material_print_temperature": { "default_value": 200 }, - "material_bed_temperature": { "default_value": 60 }, - "line_width": { "default_value": 0.48 }, "layer_height": { "default_value": 0.2 }, "layer_height_0": { "default_value": 0.2 }, - "wall_line_count": { "default_value": 3 }, "wall_thickness": { "default_value": 1.2 }, "top_bottom_thickness": { "default_value": 1.2 }, "infill_sparse_density": { "default_value": 20 }, - "infill_overlap": { "default_value": 15 }, "speed_print": { "default_value": 60 }, - "speed_travel": { "default_value": 160 }, - "speed_layer_0": { "default_value": 30 }, - "speed_wall_x": { "default_value": 35 }, - "speed_wall_0": { "default_value": 30 }, - "speed_infill": { "default_value": 60 }, - "speed_topbottom": { "default_value": 20 }, - "skirt_brim_speed": { "default_value": 35 }, "skirt_line_count": { "default_value": 4 }, "skirt_brim_minimal_length": { "default_value": 30 }, "skirt_gap": { "default_value": 6 }, - "cool_fan_full_at_height": { "default_value": 0.4 }, "retraction_speed": { "default_value": 15.0}, "retraction_amount": { "default_value": 1.5} } diff --git a/resources/definitions/innovo_inventor.def.json b/resources/definitions/innovo_inventor.def.json index 72a9ec3edb..13a8a7c59b 100644 --- a/resources/definitions/innovo_inventor.def.json +++ b/resources/definitions/innovo_inventor.def.json @@ -61,36 +61,10 @@ "top_bottom_thickness": { "default_value": 1.2 }, - "material_print_temperature": { - "default_value": 205 - }, - "material_bed_temperature": { - "default_value": 60 - }, "speed_print": { "default_value": 50 }, - "speed_wall_0": { - "default_value": 25 - }, - "speed_wall_x": { - "default_value": 40 - }, - "speed_infill": { - "default_value": 80 - }, - "speed_topbottom": { - "default_value": 30 - }, - "speed_support_interface": - { - "default_value": 20 - }, - "speed_travel": { - "default_value": 150 - }, "speed_layer_0": { - "default_value": 30.0, "minimum_value": 0.1 } } diff --git a/resources/definitions/jgaurora_a1.def.json b/resources/definitions/jgaurora_a1.def.json index 3c9f9c61e9..1c910f0d95 100644 --- a/resources/definitions/jgaurora_a1.def.json +++ b/resources/definitions/jgaurora_a1.def.json @@ -47,12 +47,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 215 - }, - "material_bed_temperature": { - "default_value": 67 - }, "layer_height_0": { "default_value": 0.12 }, @@ -62,21 +56,6 @@ "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 12 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/jgaurora_a3s.def.json b/resources/definitions/jgaurora_a3s.def.json index bd8d0bd0e3..ead0a5f9e7 100644 --- a/resources/definitions/jgaurora_a3s.def.json +++ b/resources/definitions/jgaurora_a3s.def.json @@ -47,12 +47,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 210 - }, - "material_bed_temperature": { - "default_value": 65 - }, "layer_height_0": { "default_value": 0.12 }, @@ -62,21 +56,6 @@ "speed_print": { "default_value": 35 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 30 - }, - "speed_topbottom": { - "default_value": 20 - }, - "speed_travel": { - "default_value": 100 - }, - "speed_layer_0": { - "default_value": 12 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/jgaurora_a5.def.json b/resources/definitions/jgaurora_a5.def.json index e02fca881b..b9f179d38e 100644 --- a/resources/definitions/jgaurora_a5.def.json +++ b/resources/definitions/jgaurora_a5.def.json @@ -49,12 +49,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 215 - }, - "material_bed_temperature": { - "default_value": 67 - }, "layer_height_0": { "default_value": 0.12 }, @@ -64,21 +58,6 @@ "speed_print": { "default_value": 40 }, - "speed_infill": { - "default_value": 40 - }, - "speed_wall": { - "default_value": 35 - }, - "speed_topbottom": { - "default_value": 35 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 12 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/jgaurora_jgmaker_magic.def.json b/resources/definitions/jgaurora_jgmaker_magic.def.json index 703305151a..8d0349a48c 100644 --- a/resources/definitions/jgaurora_jgmaker_magic.def.json +++ b/resources/definitions/jgaurora_jgmaker_magic.def.json @@ -47,12 +47,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 200 - }, - "material_bed_temperature": { - "default_value": 60 - }, "layer_height_0": { "default_value": 0.2 }, @@ -62,21 +56,6 @@ "speed_print": { "default_value": 60 }, - "speed_infill": { - "default_value": 60 - }, - "speed_wall": { - "default_value": 30 - }, - "speed_topbottom": { - "default_value": 45 - }, - "speed_travel": { - "default_value": 125 - }, - "speed_layer_0": { - "default_value": 30 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/jgaurora_z_603s.def.json b/resources/definitions/jgaurora_z_603s.def.json index ceade3243a..8dbf5a82bb 100644 --- a/resources/definitions/jgaurora_z_603s.def.json +++ b/resources/definitions/jgaurora_z_603s.def.json @@ -22,7 +22,7 @@ }, "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 Y0 F600 ;move to the X/Y-axis origin (Home)\nM84 ;turn off stepper motors\n; -- end of END GCODE --" - }, + }, "machine_width": { "default_value": 280 }, @@ -47,12 +47,6 @@ "material_diameter": { "default_value": 1.75 }, - "material_print_temperature": { - "default_value": 210 - }, - "material_bed_temperature": { - "default_value": 55 - }, "layer_height_0": { "default_value": 0.2 }, @@ -62,21 +56,6 @@ "speed_print": { "default_value": 60 }, - "speed_infill": { - "default_value": 60 - }, - "speed_wall": { - "default_value": 30 - }, - "speed_topbottom": { - "default_value": 45 - }, - "speed_travel": { - "default_value": 125 - }, - "speed_layer_0": { - "default_value": 20 - }, "support_enable": { "default_value": true }, diff --git a/resources/definitions/julia.def.json b/resources/definitions/julia.def.json index 62e4170c1f..15e5057a55 100644 --- a/resources/definitions/julia.def.json +++ b/resources/definitions/julia.def.json @@ -21,25 +21,14 @@ "machine_end_gcode": { "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n" }, - "material_bed_temperature": { "default_value": 100 }, "layer_height": { "default_value": 0.2 }, "support_angle": { "default_value": 30 }, - "infill_overlap": { "default_value": 30 }, "layer_height_0": { "default_value": 0.2 }, "speed_print": { "default_value": 80 }, - "speed_wall_0": { "default_value": 30 }, - "speed_travel": { "default_value": 150 }, - "brim_line_count": { "default_value": 15 }, - "skin_overlap": { "default_value": 30 }, "prime_tower_size": { "default_value": 8.660254037844387 }, - "bottom_thickness": { "default_value": 0.8 }, "retraction_amount": { "default_value": 3 }, - "speed_topbottom": { "default_value": 80 }, - "material_print_temperature": { "default_value": 230 }, "support_pattern": { "default_value": "grid" }, - "speed_infill": { "default_value": 80 }, "infill_sparse_density": { "default_value": 10 }, - "top_thickness": { "default_value": 0.8 }, "machine_extruder_count": { "default_value": 1 }, "retraction_combing": { "default_value": "off" }, "machine_heated_bed": { "default_value": true }, diff --git a/resources/definitions/makeit_pro_l.def.json b/resources/definitions/makeit_pro_l.def.json index 5d09189de8..d601a5c309 100644 --- a/resources/definitions/makeit_pro_l.def.json +++ b/resources/definitions/makeit_pro_l.def.json @@ -77,27 +77,12 @@ "retraction_amount": { "default_value": 6 }, - "retraction_min_travel": { - "default_value": 1.5 - }, - "speed_travel": { - "default_value": 150 - }, "speed_print": { "default_value": 60 }, "wall_thickness": { "default_value": 1.2 }, - "bottom_thickness": { - "default_value": 0.2 - }, - "speed_layer_0": { - "default_value": 20 - }, - "speed_print_layer_0": { - "default_value": 20 - }, "cool_min_layer_time_fan_speed_max": { "default_value": 5 }, diff --git a/resources/definitions/makeit_pro_m.def.json b/resources/definitions/makeit_pro_m.def.json index 57e2a7dbd4..267646b647 100644 --- a/resources/definitions/makeit_pro_m.def.json +++ b/resources/definitions/makeit_pro_m.def.json @@ -77,27 +77,12 @@ "retraction_amount": { "default_value": 6 }, - "retraction_min_travel": { - "default_value": 1.5 - }, - "speed_travel": { - "default_value": 150 - }, "speed_print": { "default_value": 60 }, "wall_thickness": { "default_value": 1.2 }, - "bottom_thickness": { - "default_value": 0.2 - }, - "speed_layer_0": { - "default_value": 20 - }, - "speed_print_layer_0": { - "default_value": 20 - }, "cool_min_layer_time_fan_speed_max": { "default_value": 5 }, diff --git a/resources/definitions/maker_starter.def.json b/resources/definitions/maker_starter.def.json index 560e53ccb9..96dca118af 100644 --- a/resources/definitions/maker_starter.def.json +++ b/resources/definitions/maker_starter.def.json @@ -53,57 +53,15 @@ "layer_height_0": { "default_value": 0.2 }, - "wall_line_count": { - "default_value": 2 - }, - "top_layers": { - "default_value": 4 - }, - "bottom_layers": { - "default_value": 4 - }, "speed_print": { "default_value": 50 }, - "speed_wall": { - "default_value": 30 - }, - "speed_wall_0": { - "default_value": 30 - }, - "speed_wall_x": { - "default_value": 30 - }, - "speed_topbottom": { - "default_value": 50 - }, - "speed_support": { - "default_value": 50 - }, - "speed_travel": { - "default_value": 120 - }, - "speed_layer_0": { - "default_value": 20 - }, - "skirt_brim_speed": { - "default_value": 15 - }, "speed_slowdown_layers": { "default_value": 4 }, "infill_sparse_density": { "default_value": 20 }, - "cool_fan_speed_min": { - "default_value": 50 - }, - "cool_fan_speed_max": { - "default_value": 100 - }, - "cool_fan_full_layer": { - "default_value": 4 - }, "cool_min_layer_time": { "default_value": 5 }, @@ -122,12 +80,6 @@ "support_z_distance": { "default_value": 0.2 }, - "support_top_distance": { - "default_value": 0.2 - }, - "support_bottom_distance": { - "default_value": 0.24 - }, "support_pattern": { "default_value": "ZigZag" }, @@ -140,24 +92,6 @@ "skirt_brim_minimal_length": { "default_value": 100 }, - "raft_base_line_spacing": { - "default_value": 2 - }, - "raft_base_thickness": { - "default_value": 0.3 - }, - "raft_base_line_width": { - "default_value": 2 - }, - "raft_base_speed": { - "default_value": 15 - }, - "raft_interface_thickness": { - "default_value": 0.24 - }, - "raft_interface_line_width": { - "default_value": 0.6 - }, "raft_airgap": { "default_value": 0.2 }, diff --git a/resources/definitions/makerbotreplicator.def.json b/resources/definitions/makerbotreplicator.def.json index 3b02215e74..24b556e1ee 100644 --- a/resources/definitions/makerbotreplicator.def.json +++ b/resources/definitions/makerbotreplicator.def.json @@ -18,9 +18,7 @@ "overrides": { "prime_tower_size": { "default_value": 10.0 }, "infill_sparse_density": { "default_value": 10 }, - "speed_travel": { "default_value": 150 }, "layer_height": { "default_value": 0.15 }, - "material_print_temperature": { "default_value": 220 }, "machine_extruder_count": { "default_value": 1 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, diff --git a/resources/definitions/malyan_m200.def.json b/resources/definitions/malyan_m200.def.json index 71c94184b2..13ad07ccae 100644 --- a/resources/definitions/malyan_m200.def.json +++ b/resources/definitions/malyan_m200.def.json @@ -30,8 +30,6 @@ "speed_wall_x": { "value": "speed_print" }, "speed_support": { "value": "speed_wall_0" }, "speed_layer_0": { "value": "round(speed_print / 2.0, 2)" }, - "speed_travel": { "default_value": 50 }, - "speed_travel_layer_0": { "default_value": 40 }, "speed_infill": { "value": "speed_print" }, "speed_topbottom": {"value": "speed_print / 2"}, diff --git a/resources/definitions/mankati_fullscale_xt_plus.def.json b/resources/definitions/mankati_fullscale_xt_plus.def.json index 104be7091b..b6fa040750 100644 --- a/resources/definitions/mankati_fullscale_xt_plus.def.json +++ b/resources/definitions/mankati_fullscale_xt_plus.def.json @@ -41,23 +41,15 @@ "layer_height": { "default_value": 0.2 }, "wall_thickness": { "default_value": 0.8 }, "top_bottom_thickness": { "default_value": 0.3 }, - "material_print_temperature": { "default_value": 195 }, - "material_bed_temperature": { "default_value": 60 }, "retraction_enable": { "default_value": true }, "retraction_speed": { "default_value": 50 }, "retraction_amount": { "default_value": 0.8 }, "retraction_hop": { "default_value": 0.075 }, "speed_print": { "default_value": 60 }, - "speed_infill": { "default_value": 100 }, - "speed_topbottom": { "default_value": 15 }, - "speed_travel": { "default_value": 150 }, "speed_layer_0": { - "minimum_value": "0.1", - "default_value": 15.0 + "minimum_value": "0.1" }, - "infill_overlap": { "default_value": 10 }, "cool_fan_enabled": { "default_value": false }, - "cool_fan_speed": { "default_value": 0 }, "skirt_line_count": { "default_value": 3 }, "skirt_gap": { "default_value": 4 }, "skirt_brim_minimal_length": { "default_value": 200 } diff --git a/resources/definitions/ord.def.json b/resources/definitions/ord.def.json index de410b0d58..4a550602f2 100644 --- a/resources/definitions/ord.def.json +++ b/resources/definitions/ord.def.json @@ -19,12 +19,9 @@ }, "overrides": { - "material_bed_temperature": { "default_value": 60 }, "prime_tower_size": { "default_value": 7.0710678118654755 }, "infill_sparse_density": { "default_value": 15 }, - "speed_travel": { "default_value": 150 }, "layer_height": { "default_value": 0.3 }, - "material_print_temperature": { "default_value": 240 }, "machine_extruder_count": { "default_value": 5 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, diff --git a/resources/definitions/printrbot_play.def.json b/resources/definitions/printrbot_play.def.json index b8879e825c..bf52363800 100644 --- a/resources/definitions/printrbot_play.def.json +++ b/resources/definitions/printrbot_play.def.json @@ -29,7 +29,6 @@ "machine_head_with_fans_polygon": { "default_value": [[-32,999],[37,999],[37,-32],[-32,-32]] }, "gantry_height": { "value": "55" }, "speed_print": { "default_value": 50 }, - "speed_travel": { "default_value": 55 }, "machine_max_feedrate_x": {"default_value": 125}, "machine_max_feedrate_y": {"default_value": 125}, "machine_max_feedrate_z": { "default_value": 5 }, diff --git a/resources/definitions/prusa_i3_mk2.def.json b/resources/definitions/prusa_i3_mk2.def.json index ff6f4469e7..5ae541049d 100644 --- a/resources/definitions/prusa_i3_mk2.def.json +++ b/resources/definitions/prusa_i3_mk2.def.json @@ -22,13 +22,10 @@ "machine_height": { "default_value": 200 }, "machine_depth": { "default_value": 210 }, "machine_center_is_zero": { "default_value": false }, - "material_bed_temperature": { "default_value": 55 }, "layer_height": { "default_value": 0.1 }, "layer_height_0": { "default_value": 0.15 }, "retraction_amount": { "default_value": 0.8 }, "retraction_speed": { "default_value": 35 }, - "retraction_retract_speed": { "default_value": 35 }, - "retraction_prime_speed": { "default_value": 35 }, "adhesion_type": { "default_value": "skirt" }, "machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] }, "gantry_height": { "value": "28" }, diff --git a/resources/definitions/punchtec_connect_xl.def.json b/resources/definitions/punchtec_connect_xl.def.json index 1efdd226fd..b262daa445 100644 --- a/resources/definitions/punchtec_connect_xl.def.json +++ b/resources/definitions/punchtec_connect_xl.def.json @@ -17,15 +17,9 @@ "overrides": { "machine_head_polygon": { "default_value": [[ 0, 0], [ 0, 0], [ 0, 0], [ 0, 0]] }, - "speed_travel": { "default_value": 150 }, "prime_tower_size": { "default_value": 8.660254037844387 }, - "speed_wall_x": { "default_value": 40 }, - "speed_wall_0": { "default_value": 40 }, - "speed_topbottom": { "default_value": 40 }, "layer_height": { "default_value": 0.2 }, - "material_print_temperature": { "default_value": 195 }, "speed_print": { "default_value": 40 }, - "speed_infill": { "default_value": 40 }, "machine_extruder_count": { "default_value": 2 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, diff --git a/resources/definitions/rigid3d.def.json b/resources/definitions/rigid3d.def.json index 43ffd6924a..a66559b393 100644 --- a/resources/definitions/rigid3d.def.json +++ b/resources/definitions/rigid3d.def.json @@ -25,23 +25,13 @@ "skirt_gap": { "default_value": 5.0 }, "cool_min_layer_time": { "default_value": 10 }, "prime_tower_size": { "default_value": 7.745966692414834 }, - "speed_wall_x": { "default_value": 40 }, - "speed_travel": { "default_value": 100 }, - "bottom_thickness": { "default_value": 0.75 }, "layer_height_0": { "default_value": 0.25 }, "support_angle": { "default_value": 45 }, - "material_bed_temperature": { "default_value": 100 }, - "top_thickness": { "default_value": 0.75 }, - "material_print_temperature": { "default_value": 235 }, "retraction_speed": { "default_value": 60.0 }, "wall_thickness": { "default_value": 0.8 }, - "retraction_min_travel": { "default_value": 2 }, - "speed_wall_0": { "default_value": 30 }, "retraction_amount": { "default_value": 1 }, - "speed_topbottom": { "default_value": 30 }, "layer_height": { "default_value": 0.25 }, "speed_print": { "default_value": 40 }, - "speed_infill": { "default_value": 40 }, "machine_extruder_count": { "default_value": 1 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, diff --git a/resources/definitions/rigid3d_3rdgen.def.json b/resources/definitions/rigid3d_3rdgen.def.json index bb3414b75d..b4d0252075 100644 --- a/resources/definitions/rigid3d_3rdgen.def.json +++ b/resources/definitions/rigid3d_3rdgen.def.json @@ -25,20 +25,12 @@ "cool_min_layer_time": { "default_value": 10 }, "prime_tower_size": { "default_value": 7.745966692414834 }, "skirt_gap": { "default_value": 5.0 }, - "speed_travel": { "default_value": 120 }, - "bottom_thickness": { "default_value": 0.75 }, "layer_height_0": { "default_value": 0.25 }, "support_angle": { "default_value": 45 }, - "material_bed_temperature": { "default_value": 100 }, - "retraction_min_travel": { "default_value": 2 }, - "speed_wall_0": { "default_value": 30 }, "retraction_speed": { "default_value": 60.0 }, "wall_thickness": { "default_value": 0.8 }, - "material_print_temperature": { "default_value": 235 }, "retraction_amount": { "default_value": 1 }, - "speed_topbottom": { "default_value": 25 }, "layer_height": { "default_value": 0.25 }, - "top_thickness": { "default_value": 0.75 }, "machine_extruder_count": { "default_value": 1 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, diff --git a/resources/definitions/rigid3d_hobby.def.json b/resources/definitions/rigid3d_hobby.def.json index db48195fe0..f50df0c47d 100644 --- a/resources/definitions/rigid3d_hobby.def.json +++ b/resources/definitions/rigid3d_hobby.def.json @@ -17,25 +17,17 @@ "overrides": { "machine_head_polygon": { "default_value": [[ 16, 30], [ 16, 45], [ 16, 45], [ 16, 30]] }, "prime_tower_size": { "default_value": 8.660254037844387 }, - "speed_travel": { "default_value": 40 }, "skirt_gap": { "default_value": 5.0 }, "cool_min_layer_time": { "default_value": 15 }, "support_pattern": { "default_value": "grid" }, "layer_height_0": { "default_value": 0.25 }, - "speed_wall_x": { "default_value": 30 }, "skirt_line_count": { "default_value": 2 }, "support_angle": { "default_value": 45 }, - "speed_topbottom": { "default_value": 20 }, - "material_print_temperature": { "default_value": 205 }, "retraction_speed": { "default_value": 80 }, "wall_thickness": { "default_value": 0.8 }, - "retraction_min_travel": { "default_value": 2 }, - "speed_wall_0": { "default_value": 20 }, "retraction_amount": { "default_value": 2 }, - "speed_layer_0": { "default_value": 15 }, "layer_height": { "default_value": 0.2 }, "speed_print": { "default_value": 30 }, - "speed_infill": { "default_value": 30 }, "machine_extruder_count": { "default_value": 1 }, "machine_heated_bed": { "default_value": false }, "machine_center_is_zero": { "default_value": false }, diff --git a/resources/definitions/rigid3d_mucit.def.json b/resources/definitions/rigid3d_mucit.def.json index 42cd99a3bd..75853fab8b 100644 --- a/resources/definitions/rigid3d_mucit.def.json +++ b/resources/definitions/rigid3d_mucit.def.json @@ -76,14 +76,9 @@ "default_value": true }, "cool_fan_speed": { - "default_value": 100, "value": "100" }, - "cool_fan_speed_min": { - "default_value": 0 - }, "cool_fan_full_at_height": { - "default_value": 0.5, "value": "0.5" }, "support_z_distance": { diff --git a/resources/definitions/rigid3d_zero.def.json b/resources/definitions/rigid3d_zero.def.json index f55f913a56..64909630d2 100644 --- a/resources/definitions/rigid3d_zero.def.json +++ b/resources/definitions/rigid3d_zero.def.json @@ -24,21 +24,11 @@ "machine_head_polygon": { "default_value": [[ 40, 15], [ 40, 60], [ 30, 60], [ 30, 15]] }, "support_pattern": { "default_value": "grid" }, "cool_min_layer_time": { "default_value": 10 }, - "speed_travel": { "default_value": 80 }, "support_angle": { "default_value": 45 }, - "retraction_min_travel": { "default_value": 2 }, - "speed_wall_0": { "default_value": 20 }, - "speed_layer_0": { "default_value": 15 }, - "speed_infill": { "default_value": 30 }, - "speed_topbottom": { "default_value": 30 }, "prime_tower_size": { "default_value": 7.745966692414834 }, "skirt_line_count": { "default_value": 2 }, - "speed_wall_x": { "default_value": 30 }, - "bottom_thickness": { "default_value": 0.75 }, "layer_height_0": { "default_value": 0.25 }, - "top_thickness": { "default_value": 0.75 }, "wall_thickness": { "default_value": 0.8 }, - "material_print_temperature": { "default_value": 195 }, "retraction_amount": { "default_value": 1.5 }, "skirt_gap": { "default_value": 5.0 }, "layer_height": { "default_value": 0.25 }, diff --git a/resources/definitions/rigid3d_zero2.def.json b/resources/definitions/rigid3d_zero2.def.json index f24c869636..cc922769f7 100644 --- a/resources/definitions/rigid3d_zero2.def.json +++ b/resources/definitions/rigid3d_zero2.def.json @@ -44,9 +44,6 @@ "material_print_temperature": { "value": 235 }, - "material_bed_temperature": { - "default_value": 100 - }, "speed_print": { "default_value": 40 }, @@ -55,7 +52,7 @@ }, "speed_travel": { "value": 100 - }, + }, "support_enable": { "default_value": false }, @@ -90,14 +87,9 @@ "default_value": false }, "cool_fan_speed": { - "default_value": 50, "value": 50 }, - "cool_fan_speed_min": { - "default_value": 0 - }, "cool_fan_full_at_height": { - "default_value": 1.0, "value": 1.0 }, "support_z_distance": { diff --git a/resources/definitions/rigidbot.def.json b/resources/definitions/rigidbot.def.json index c04cd7c5e6..d6fb4f1651 100644 --- a/resources/definitions/rigidbot.def.json +++ b/resources/definitions/rigidbot.def.json @@ -49,37 +49,15 @@ "top_bottom_thickness": { "default_value": 0.3 }, - "material_print_temperature": { - "default_value": 195 - }, - "material_bed_temperature": { - "default_value": 60 - }, "speed_print": { "default_value": 60 }, - "speed_infill": { - "default_value": 100 - }, - "speed_topbottom": { - "default_value": 15 - }, - "speed_travel": { - "default_value": 150 - }, "speed_layer_0": { - "default_value": 15, "minimum_value": "0.1" }, - "infill_overlap": { - "default_value": 10 - }, "cool_fan_enabled": { "default_value": false }, - "cool_fan_speed": { - "default_value": 0 - }, "skirt_line_count": { "default_value": 3 }, diff --git a/resources/definitions/rigidbot_big.def.json b/resources/definitions/rigidbot_big.def.json index c97c6df9f3..9568417acc 100644 --- a/resources/definitions/rigidbot_big.def.json +++ b/resources/definitions/rigidbot_big.def.json @@ -49,37 +49,15 @@ "top_bottom_thickness": { "default_value": 0.3 }, - "material_print_temperature": { - "default_value": 195 - }, - "material_bed_temperature": { - "default_value": 60 - }, "speed_print": { "default_value": 60 }, - "speed_infill": { - "default_value": 100 - }, - "speed_topbottom": { - "default_value": 15 - }, - "speed_travel": { - "default_value": 150 - }, "speed_layer_0": { - "default_value": 15, "minimum_value": "0.1" }, - "infill_overlap": { - "default_value": 10 - }, "cool_fan_enabled": { "default_value": false }, - "cool_fan_speed": { - "default_value": 0 - }, "skirt_line_count": { "default_value": 3 }, diff --git a/resources/definitions/robo_3d_r1.def.json b/resources/definitions/robo_3d_r1.def.json index 8d7698e198..36b8addd27 100644 --- a/resources/definitions/robo_3d_r1.def.json +++ b/resources/definitions/robo_3d_r1.def.json @@ -22,28 +22,16 @@ "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n" }, "cool_min_layer_time": { "default_value": 7 }, - "speed_topbottom": { "default_value": 40 }, "retraction_speed": { "default_value": 50 }, - "layer_0_z_overlap": { "default_value": 0.2 }, "cool_min_speed": { "default_value": 19 }, - "material_bed_temperature": { "default_value": 60 }, "support_angle": { "default_value": 50 }, - "speed_layer_0": { "default_value": 30 }, - "line_width": { "default_value": 0.4 }, - "speed_infill": { "default_value": 60 }, "prime_tower_size": { "default_value": 8.660254037844387 }, "support_enable": { "default_value": true }, - "cool_fan_full_at_height": { "default_value": 0.1 }, - "bottom_thickness": { "default_value": 1.2 }, "raft_airgap": { "default_value": 0.2 }, "layer_height_0": { "default_value": 0.15 }, - "top_thickness": { "default_value": 1.2 }, - "speed_wall_0": { "default_value": 40 }, - "retraction_min_travel": { "default_value": 5 }, "material_flow": { "default_value": 100 }, "infill_sparse_density": { "default_value": 10 }, "wall_thickness": { "default_value": 1.2 }, - "material_print_temperature": { "default_value": 190 }, "retraction_amount": { "default_value": 3 }, "layer_height": { "default_value": 0.2 }, "speed_print": { "default_value": 40 }, diff --git a/resources/definitions/seemecnc_artemis.def.json b/resources/definitions/seemecnc_artemis.def.json index ec92f528d7..88c1d84b3d 100644 --- a/resources/definitions/seemecnc_artemis.def.json +++ b/resources/definitions/seemecnc_artemis.def.json @@ -27,13 +27,11 @@ "machine_name": { "default_value": "Artemis" }, "machine_shape": { "default_value": "elliptic" }, "machine_width": { "default_value": 290 }, - "relative_extrusion": { "default_value": false }, + "relative_extrusion": { "value": "False" }, "retraction_amount": { "default_value": 3.2 }, "retraction_combing": { "default_value": "off" }, "retraction_hop_enabled": { "default_value": true }, "retraction_hop_only_when_collides": { "default_value": false }, - "retraction_prime_speed": { "default_value": 45 }, - "retraction_retract_speed": { "default_value": 45 }, "retraction_speed": { "default_value": 45 }, "machine_start_gcode": { "default_value": "G28\nG1 Z15.0 F10000\nG92 E0" diff --git a/resources/definitions/seemecnc_v32.def.json b/resources/definitions/seemecnc_v32.def.json index d4316c25d9..0f49410116 100644 --- a/resources/definitions/seemecnc_v32.def.json +++ b/resources/definitions/seemecnc_v32.def.json @@ -27,13 +27,11 @@ "machine_name": { "default_value": "Rostock Max V3.2" }, "machine_shape": { "default_value": "elliptic" }, "machine_width": { "default_value": 265 }, - "relative_extrusion": { "default_value": false }, + "relative_extrusion": { "value": "False" }, "retraction_amount": { "default_value": 3.2 }, "retraction_combing": { "default_value": "off" }, "retraction_hop_enabled": { "default_value": true }, "retraction_hop_only_when_collides": { "default_value": false }, - "retraction_prime_speed": { "default_value": 45 }, - "retraction_retract_speed": { "default_value": 45 }, "retraction_speed": { "default_value": 45 }, "machine_start_gcode": { "default_value": "G28\nG1 Z15.0 F10000\nG92 E0" diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json index a3710fb9af..4ae8473285 100644 --- a/resources/definitions/strateo3d.def.json +++ b/resources/definitions/strateo3d.def.json @@ -32,7 +32,7 @@ "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, - "gantry_height": { "default_value": 40 }, + "gantry_height": { "value": "40" }, "machine_extruder_count": { "default_value": 2 }, "machine_gcode_flavor": { "default_value": "Marlin" }, "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, diff --git a/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json b/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json index a7f4b7e549..e4893cacac 100644 --- a/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json +++ b/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json @@ -55,9 +55,6 @@ "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" }, - "speed_layer_0": { - "default_value": 10 - }, "speed_support": { "value": "speed_wall_0" }, diff --git a/resources/definitions/tam.def.json b/resources/definitions/tam.def.json index 67a4bb8eab..211049ca3d 100644 --- a/resources/definitions/tam.def.json +++ b/resources/definitions/tam.def.json @@ -37,7 +37,6 @@ "machine_center_is_zero": { "default_value": false }, "speed_print": { "default_value": 60 }, - "speed_travel": { "default_value": 200 }, "retraction_amount": { "default_value": 0.4 }, "retraction_speed": { "default_value": 35}, diff --git a/resources/definitions/tizyx_evy.def.json b/resources/definitions/tizyx_evy.def.json index f92f679677..57c7337196 100644 --- a/resources/definitions/tizyx_evy.def.json +++ b/resources/definitions/tizyx_evy.def.json @@ -50,13 +50,8 @@ "fill_outline_gaps": { "default_value": true}, "infill_sparse_density": { "default_value": 15}, "retraction_amount": { "default_value": 2.5}, - "retraction_min_travel": { "default_value": 2}, "retraction_speed": { "default_value": 30}, "speed_print": { "default_value": 60}, - "speed_topbottom": { "default_value": 50}, - "speed_wall_0": { "default_value": 40}, - "top_layers": { "default_value": 4}, - "wall_line_count": { "default_value": 2}, "cool_min_layer_time": { "default_value": 11}, "layer_height": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" }, "layer_height_0": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" }, diff --git a/resources/definitions/ubuild-3d_mr_bot_280.def.json b/resources/definitions/ubuild-3d_mr_bot_280.def.json index 060752387b..5157befc10 100644 --- a/resources/definitions/ubuild-3d_mr_bot_280.def.json +++ b/resources/definitions/ubuild-3d_mr_bot_280.def.json @@ -24,12 +24,9 @@ "machine_height": { "default_value": 275 }, "machine_depth": { "default_value": 275 }, "machine_center_is_zero": { "default_value": false }, - "material_bed_temperature": { "default_value": 70 }, "layer_height_0": { "default_value": 0.1 }, "retraction_amount": { "default_value": 2 }, "retraction_speed": { "default_value": 50 }, - "retraction_retract_speed": { "default_value": 50 }, - "retraction_prime_speed": { "default_value": 30 }, "adhesion_type": { "default_value": "skirt" }, "machine_nozzle_heat_up_speed": { "default_value": 2 }, "machine_nozzle_cool_down_speed": { "default_value": 2 }, diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index bb1ab13196..40fbdaf709 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -88,9 +88,6 @@ }, "machine_acceleration": { "default_value": 3000 - }, - "machine_nozzle_temp_enabled": { - "default_value": false } } } diff --git a/resources/definitions/ultimaker2_plus.def.json b/resources/definitions/ultimaker2_plus.def.json index 65ee8f063b..633e50bdba 100644 --- a/resources/definitions/ultimaker2_plus.def.json +++ b/resources/definitions/ultimaker2_plus.def.json @@ -37,9 +37,6 @@ "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" }, - "speed_layer_0": { - "default_value": 20 - }, "speed_support": { "value": "speed_wall_0" }, diff --git a/resources/definitions/vertex_k8400.def.json b/resources/definitions/vertex_k8400.def.json index 6bba095978..dad50cffe8 100644 --- a/resources/definitions/vertex_k8400.def.json +++ b/resources/definitions/vertex_k8400.def.json @@ -20,12 +20,6 @@ "machine_heated_bed": { "default_value": true }, - "material_bed_temperature": { - "default_value": 0 - }, - "material_bed_temperature_layer_0": { - "default_value": 0 - }, "machine_width": { "default_value": 200 }, diff --git a/resources/definitions/vertex_k8400_dual.def.json b/resources/definitions/vertex_k8400_dual.def.json index 9d014b9cf8..f5c4921cfc 100644 --- a/resources/definitions/vertex_k8400_dual.def.json +++ b/resources/definitions/vertex_k8400_dual.def.json @@ -18,12 +18,6 @@ "machine_heated_bed": { "default_value": true }, - "material_bed_temperature": { - "default_value": 0 - }, - "material_bed_temperature_layer_0": { - "default_value": 0 - }, "machine_width": { "default_value": 223.7 }, diff --git a/resources/definitions/vertex_nano_k8600.def.json b/resources/definitions/vertex_nano_k8600.def.json index 02697a1152..ef9552caf3 100644 --- a/resources/definitions/vertex_nano_k8600.def.json +++ b/resources/definitions/vertex_nano_k8600.def.json @@ -19,12 +19,6 @@ "machine_heated_bed": { "default_value": false }, - "material_bed_temperature": { - "default_value": 0 - }, - "material_bed_temperature_layer_0": { - "default_value": 0 - }, "machine_width": { "default_value": 80 }, diff --git a/resources/definitions/wanhao_d9.def.json b/resources/definitions/wanhao_d9.def.json index 39ad139ff8..ac4d41fa40 100644 --- a/resources/definitions/wanhao_d9.def.json +++ b/resources/definitions/wanhao_d9.def.json @@ -31,8 +31,6 @@ "support_angle": { "default_value": 60 },
"support_enable": { "default_value": true },
"layer_height_0": { "default_value": 0.15 },
- "top_thickness": { "default_value": 0.6 },
- "material_print_temperature": { "default_value": 190 },
"layer_height": { "default_value": 0.2 },
"speed_print": { "default_value": 30 },
"adhesion_type": { "default_value": "raft" },
diff --git a/resources/definitions/zone3d_printer.def.json b/resources/definitions/zone3d_printer.def.json index 5aa015cace..4c72422788 100644 --- a/resources/definitions/zone3d_printer.def.json +++ b/resources/definitions/zone3d_printer.def.json @@ -16,9 +16,7 @@ "overrides": { "prime_tower_size": { "default_value": 10.350983390135314 }, - "material_print_temperature": { "default_value": 260 }, "layer_height": { "default_value": 0.14 }, - "speed_travel": { "default_value": 150 }, "machine_extruder_count": { "default_value": 1 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, |