Add a Laybrick profile for TAZ6

3 files changed, 320 insertions, 0 deletions

diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/Laybrick/material.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/Laybrick/material.ini
new file mode 100644
index 0000000000..3fb3f75c3d
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/Laybrick/material.ini
@@ -0,0 +1,5 @@
+[info]
+name = Laybrick (CC-Products)
+material_types = Intermediate
+order = 11
+url = lulzbot.com/store/filament/laybrick?pk_campaign=software-cura
diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/Laybrick/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/Laybrick/medium-quality/profile.ini
new file mode 100644
index 0000000000..76cf1ada03
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/Laybrick/medium-quality/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ6_single_extruder_v2.1/laybrick_medium-quality_TAZ6_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_extruder_v2.1/laybrick_medium-quality_TAZ6_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_extruder_v2.1/laybrick_medium-quality_TAZ6_single-extruder_0.5noz_cura.ini
new file mode 100644
index 0000000000..6fde3bd4fe
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_extruder_v2.1/laybrick_medium-quality_TAZ6_single-extruder_0.5noz_cura.ini
@@ -0,0 +1,311 @@
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.76
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 190
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 55
+solidarea_speed = 45
+inset0_speed = 45
+insetx_speed = 50
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 6
+fan_speed = 80
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 1.5
+support_z_distance = 0.2
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;This profile is designed specifically for LulzBot TAZ 6 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
+	M107                         ; disable fans
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	    G28 XY                       ; home X and Y
+	    G1 X-19 Y258 F1000           ; move to safe homing position
+	    M109 R150                    ; soften filament for z homing
+	    G28 Z                        ; home Z
+	M104 S140                    ; wipe temp
+	G1 E-30 F100                 ; suck up XXmm of filament
+	G1 X-15 Y100 F3000           ; move above wiper pad
+	G1 Z1                        ; push nozzle into wiper
+	G1 X-17 Y95 F1000            ; slow wipe
+	G1 X-17 Y90 F1000            ; slow wipe
+	G1 X-17 Y85 F1000            ; slow wipe
+	G1 X-15 Y90 F1000            ; slow wipe
+	G1 X-17 Y80 F1000            ; slow wipe
+	G1 X-15 Y95 F1000            ; slow wipe
+	G1 X-17 Y75 F2000            ; fast wipe
+	G1 X-15 Y65 F2000            ; fast wipe
+	G1 X-17 Y70 F2000            ; fast wipe
+	G1 X-15 Y60 F2000            ; fast wipe
+	G1 X-17 Y55 F2000            ; fast wipe
+	G1 X-15 Y50 F2000            ; fast wipe
+	G1 X-17 Y40 F2000            ; fast wipe
+	G1 X-15 Y45 F2000            ; fast wipe
+	G1 X-17 Y35 F2000            ; fast wipe
+	G1 X-15 Y40 F2000            ; fast wipe
+	G1 X-17 Y70 F2000            ; fast wipe
+	G1 X-15 Y30 Z2 F2000         ; fast wipe
+	G1 X-17 Y35 F2000            ; fast wipe
+	G1 X-15 Y25 F2000            ; fast wipe
+	G1 X-17 Y30 F2000            ; fast wipe
+	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
+	G1 X-17 Y23 F1000            ; slow wipe
+	G1 Z10                       ; raise extruder
+	M109 R140                    ; heat to probe temp
+	G1 X-9 Y-9                   ; move above probe
+	M204 S100                    ; set accel for probing
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
+	G1 X0 Y0 Z15 F5000           ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
+	M109 R{print_temperature}    ; set extruder temp and wait
+	M190 R{print_bed_temperature}; get bed temping up during first layer
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
+	M104 S0                        ; hotend off
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
+	G90                            ; absolute positioning
+	G1 Y0 F3000                    ; move to cooling position
+	M190 R50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+