Merge pull request #11774 from Ultimaker/PP-54_decrease-resolution

Pp 54 decrease resolution

42 files changed, 15 insertions, 89 deletions

diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index 41593be8c2..5818c11a6f 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -82,6 +82,18 @@
         },
         "xy_offset": {
             "value": "-layer_height * 0.1"
+        },
+        "meshfix_maximum_resolution": {
+            "value": "max(speed_wall_0 / 75, 0.5)"
+        },
+        "meshfix_maximum_deviation": {
+            "value": "machine_nozzle_size / 10"
+        },
+        "jerk_travel": {
+            "value": "jerk_print"
+        },
+        "acceleration_travel": {
+            "value": "acceleration_wall"
         }
     }
 }
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index 48bb7b4362..fd21ab5271 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -111,7 +111,6 @@
         "jerk_support_infill": {"minimum_value_warning": 20 },
         "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
         "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_travel": {"minimum_value_warning": 20 },
         "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
         "jerk_print_layer_0": {"minimum_value_warning": 20 },
         "jerk_travel_layer_0": {"minimum_value_warning": 20 },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 83feb98eb2..640a062c6d 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -103,7 +103,6 @@
         "jerk_support_infill": {"minimum_value_warning": 20 },
         "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
         "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_travel": {"minimum_value_warning": 20 },
         "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
         "jerk_print_layer_0": {"minimum_value_warning": 20 },
         "jerk_travel_layer_0": {"minimum_value_warning": 20 },
@@ -159,8 +158,6 @@
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "initial_layer_line_width_factor": { "value": "120" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
     }
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index c4afee4e3a..0d5d7499cc 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -105,7 +105,6 @@
         "jerk_support_infill": {"minimum_value_warning": 20 },
         "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
         "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_travel": {"minimum_value_warning": 20 },
         "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
         "jerk_print_layer_0": {"minimum_value_warning": 20 },
         "jerk_travel_layer_0": {"minimum_value_warning": 20 },
@@ -161,8 +160,6 @@
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
-        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
-        "meshfix_maximum_deviation": { "value": "layer_height / 4" },
         "optimize_wall_printing_order": { "value": "True" },
         "initial_layer_line_width_factor": { "value": "120" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index 2b91c0c745..e5b88f2d77 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -34,8 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index ff3e3c3e51..1c0ac78324 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -34,8 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index 6f5aa0168d..1e133a2148 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -33,8 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index e0d6001f47..4256f134cc 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -33,8 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
-
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
index 1c2322a89a..c82fb9c68d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -28,8 +28,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-jerk_travel = 50
-
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
index 55d40e570c..f60adf89f3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -27,8 +27,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
index 57e6a36b1e..6f230a94cd 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@@ -29,8 +29,6 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
index 0c1f8fdde9..57fad8111c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -25,8 +25,6 @@ retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
index 894d71da08..0ce09d5812 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index 84262cfdb5..4bf6623cf6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
index 24845618c7..46f1985be1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
index 6718f911cc..b72c4565ad 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -22,5 +22,5 @@ speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50
\ No newline at end of file
+
+speed_infill = =math.ceil(speed_print * 33 / 45)
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
index f46afc8993..43d518be56 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
index 1cf749a436..ad9ef89a03 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
@@ -23,6 +23,5 @@ retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
index 4eb4c11298..1f131578a9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -25,6 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50
-cool_fan_speed = 20 
+cool_fan_speed = 20
 initial_layer_line_width_factor = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
index 157ec95d41..60c06b80ce 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -23,7 +23,6 @@ retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 layer_height_0 = 0.27
 initial_layer_line_width_factor = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index 46c7b4a45b..dc4858e463 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 6655f88e39..d2e23c81a9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -49,4 +49,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index c4444eb43d..3d4076c08c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 8afe7e841f..9271ecc864 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -32,5 +32,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index 29de3386d6..eb4ced65c1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -34,7 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index 053c129431..7ba60c0fd4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -33,7 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index 0eff2bcf3c..e991199658 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -33,7 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index d26fe8666b..a9e107d887 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -29,8 +29,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-jerk_travel = 50
-
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index e9b8596f9b..408c65da04 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -27,7 +27,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index 124bd93167..e803a92538 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -29,7 +29,5 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index 1d617734b4..4653d1bdbb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -25,7 +25,5 @@ retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
index bc74eeb4cf..5087857b86 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index 33e4f52acd..d3637ca861 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
index c66f64eae5..f79c57f967 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
index 577ae0e24b..3f9bec36ab 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -23,4 +23,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
index e3c995b644..d2ec9bdc00 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
index 6e181a16ff..6e6b0a09a4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
@@ -23,6 +23,5 @@ retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
index 058c5f2581..5de1db358f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -25,6 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 33 / 45)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
index 10c05f49f5..1f95f693e8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -23,7 +23,6 @@ retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index a672798bd0..f6d8169fe8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 5b8b097a57..561acf9fbc 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -48,4 +48,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index 77c9e91886..fa432061bb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50