Updates to Mini quick print settings

Added changes from the print profiles repo. It was also found that the nozzle setting in the machine profile was not being used. This means all of the previous gcode was using 0.4mm nozzle size for the Mini. The profiles need further testing but we could see problems with the nozzle size change.

1 files changed, 25 insertions, 21 deletions

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index ff0e939a20..409d2e7d22 100644
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -94,10 +94,9 @@ class simpleModePanel(wx.Panel):
 
 # LulzBot Mini slice settings for use with the simple slice selection.
 		if profile.getMachineSetting('machine_type') == 'lulzbot_mini':
+			put('nozzle_size', '0.5')
 			put('wall_thickness', '1')
 			put('fill_density', '20')
-			put('print_temperature', '0')
-			put('print_bed_temperature', '0')
 			put('retraction_amount', '1.5')
 			put('retraction_hop', '0.1')
 			put('bottom_thickness', '0.425')
@@ -118,12 +117,12 @@ class simpleModePanel(wx.Panel):
 			if self.printBrim.GetValue():
 				put('platform_adhesion', 'Brim')
 			if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
+				put('print_temperature', '230')
 				put('solid_layer_thickness', '0.8')
 				put('retraction_speed', '25')
 				put('cool_min_layer_time', '15')
 				put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-;Print time: {print_time}
 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
 G21                          ; metric values
@@ -131,7 +130,7 @@ G90                          ; absolute positioning
 M82                          ; set extruder to absolute mode
 M107                         ; start with the fan off
 G92 E0                       ; set extruder position to 0
-M140 S110                    ; get bed heating up
+M140 S{print_bed_temperature}; get bed heating up
 G28                          ; home all
 M109 S150                    ; set to cleaning temp and wait
 G1 Z150 E-30 F75             ; suck up XXmm of filament
@@ -173,12 +172,13 @@ M204 S2000                   ; set accel back to normal
 G1 X5 Y15 Z10 F5000          ; get out the way
 M400                         ; clear buffer
 G4 S1                        ; pause
-M109 S230                    ; set extruder temp and wait
+M109 S{print_temperature}    ; set extruder temp and wait
 G4 S25                       ; wait for bed to temp up
 G1 Z2 E0 F75                 ; extrude filament back into nozzle
-M140 S110                    ; get bed temping up during first layer
+M140 S{print_bed_temperature}; get bed temping up during first layer
 """)
-				put('end.gcode', """M400
+				put('end.gcode', """
+M400
 M104 S0                         ; Hotend off
 M140 S0                         ; heated bed heater off (if you have it)
 M107                            ; fans off
@@ -193,6 +193,7 @@ G90                             ; absolute positioning
 ;{profile_string}
 """)
 				if self.printMaterialHIPS.GetValue():
+					put('print_bed_temperature', '100')
 					put('fan_full_height', '2')
 					put('fan_speed', '60')
 					put('fan_speed_max', '80')
@@ -256,21 +257,22 @@ G90                             ; absolute positioning
 						put('inset0_speed', '20')
 						put('insetx_speed', '25')
 				if self.printMaterialABS.GetValue():
-					put('fan_full_height', '5')
+					put('print_bed_temperature', '110')
+					put('fan_full_height', '3')
 					put('fan_speed', '40')
-					put('fan_speed_max', '60')
+					put('fan_speed_max', '50')
 					if self.printTypeLow.GetValue():
 						put('layer_height', '0.38')
 						put('print_speed', '85')
-						put('infill_speed', '110')
-						put('inset0_speed', '70')
-						put('insetx_speed', '80')
+						put('infill_speed', '70')
+						put('inset0_speed', '40')
+						put('insetx_speed', '45')
 					if self.printTypeNormal.GetValue():
 						put('layer_height', '0.25')
 						put('print_speed', '50')
-						put('infill_speed', '55')
-						put('inset0_speed', '45')
-						put('insetx_speed', '50')
+						put('infill_speed', '70')
+						put('inset0_speed', '40')
+						put('insetx_speed', '45')
 					if self.printTypeHigh.GetValue():
 						put('layer_height', '0.14')
 						put('print_speed', '50')
@@ -278,6 +280,8 @@ G90                             ; absolute positioning
 						put('inset0_speed', '45')
 						put('insetx_speed', '50')
 			elif self.printMaterialPLA.GetValue():
+				put('print_temperature', '200')
+				put('print_bed_temperature', '65')
 				put('solid_layer_thickness', '1')
 				put('retraction_speed', '10')
 				put('infill_speed', '55')
@@ -289,7 +293,6 @@ G90                             ; absolute positioning
 				put('fan_speed_max', '100')
 				put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-;Print time: {print_time}
 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
 G21                          ; metric values
@@ -297,7 +300,7 @@ G90                          ; absolute positioning
 M82                          ; set extruder to absolute mode
 M107                         ; start with the fan off
 G92 E0                       ; set extruder position to 0
-M140 S75                     ; get bed heating up
+M140 S{print_bed_temperature}; get bed heating up
 G28                          ; home all
 M109 S140                    ; set to cleaning temp and wait
 G1 Z150 E-30 F75             ; suck up XXmm of filament
@@ -339,10 +342,11 @@ M204 S2000                   ; Restore standard acceleration
 G1 X5 Y15 Z10 F5000          ; get out the way
 G4 S1                        ; pause
 M400                         ; clear buffer
-M109 S195                    ; set extruder temp and wait
+M109 S{print_temperature}    ; set extruder temp and wait
 G4 S15                       ; wait for bed to temp up
 G1 Z2 E0 F75                 ; extrude filament back into nozzle
-M140 S65                     ; get bed temping up during first layer
+M140 S{print_bed_temperature}; get bed temping up during first layer
+
 """)
 				put('end.gcode', """
 M400
@@ -356,14 +360,14 @@ M104 S0                                      ;
 G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
 M84                                          ; steppers off
 G90                                          ; absolute positioning
-;{profile_string}""")
+;{profile_string}
+""")
 				if self.printTypeLow.GetValue():
 					put('layer_height', '0.38')
 				if self.printTypeNormal.GetValue():
 					put('layer_height', '0.25')
 				if self.printTypeHigh.GetValue():
 					put('layer_height', '0.14')				
-			nozzle_size = float(get('nozzle_size'))
 			put('filament_diameter', self.printMaterialDiameter.GetValue())
 			put('plugin_config', '')
 ### LulzBot TAZ slice settings for use with the simple slice selection.