WIP: Remove UMOCheckup MachineAction

Not used any more.

2 files changed, 0 insertions, 481 deletions

diff --git a/plugins/UltimakerMachineActions/UMOCheckupMachineAction.py b/plugins/UltimakerMachineActions/UMOCheckupMachineAction.py
deleted file mode 100644
index f9ad4789e5..0000000000
--- a/plugins/UltimakerMachineActions/UMOCheckupMachineAction.py
+++ /dev/null
@@ -1,193 +0,0 @@
-from cura.MachineAction import MachineAction
-from cura.PrinterOutputDevice import PrinterOutputDevice
-from UM.Application import Application
-from PyQt5.QtCore import pyqtSlot, pyqtSignal, pyqtProperty
-
-from UM.Logger import Logger
-from UM.i18n import i18nCatalog
-catalog = i18nCatalog("cura")
-
-
-##  Action to check up if the self-built UMO was done correctly.
-class UMOCheckupMachineAction(MachineAction):
-    def __init__(self):
-        super().__init__("UMOCheckup", catalog.i18nc("@action", "Checkup"))
-        self._qml_url = "UMOCheckupMachineAction.qml"
-        self._hotend_target_temp = 180
-        self._bed_target_temp = 60
-        self._output_device = None
-        self._bed_test_completed = False
-        self._hotend_test_completed = False
-
-        # Endstop tests
-        self._x_min_endstop_test_completed = False
-        self._y_min_endstop_test_completed = False
-        self._z_min_endstop_test_completed = False
-
-        self._check_started = False
-
-        Application.getInstance().getOutputDeviceManager().outputDevicesChanged.connect(self._onOutputDevicesChanged)
-
-    onBedTestCompleted = pyqtSignal()
-    onHotendTestCompleted = pyqtSignal()
-
-    onXMinEndstopTestCompleted = pyqtSignal()
-    onYMinEndstopTestCompleted = pyqtSignal()
-    onZMinEndstopTestCompleted = pyqtSignal()
-
-    bedTemperatureChanged = pyqtSignal()
-    hotendTemperatureChanged = pyqtSignal()
-
-    def _onOutputDevicesChanged(self):
-        # Check if this action was started, but no output device was found the first time.
-        # If so, re-try now that an output device has been added/removed.
-        if self._output_device is None and self._check_started:
-            self.startCheck()
-
-    def _getPrinterOutputDevices(self):
-        return [printer_output_device for printer_output_device in
-                Application.getInstance().getOutputDeviceManager().getOutputDevices() if
-                isinstance(printer_output_device, PrinterOutputDevice)]
-
-    def _reset(self):
-        if self._output_device:
-            self._output_device.bedTemperatureChanged.disconnect(self.bedTemperatureChanged)
-            self._output_device.hotendTemperaturesChanged.disconnect(self.hotendTemperatureChanged)
-            self._output_device.bedTemperatureChanged.disconnect(self._onBedTemperatureChanged)
-            self._output_device.hotendTemperaturesChanged.disconnect(self._onHotendTemperatureChanged)
-            self._output_device.endstopStateChanged.disconnect(self._onEndstopStateChanged)
-            try:
-                self._output_device.stopPollEndstop()
-            except AttributeError as e:  # Connection is probably not a USB connection. Something went pretty wrong if this happens.
-                Logger.log("e", "An exception occurred while stopping end stop polling: %s" % str(e))
-
-        self._output_device = None
-
-        self._check_started = False
-        self.checkStartedChanged.emit()
-
-        # Ensure everything is reset (and right signals are emitted again)
-        self._bed_test_completed = False
-        self.onBedTestCompleted.emit()
-        self._hotend_test_completed = False
-        self.onHotendTestCompleted.emit()
-
-        self._x_min_endstop_test_completed = False
-        self.onXMinEndstopTestCompleted.emit()
-        self._y_min_endstop_test_completed = False
-        self.onYMinEndstopTestCompleted.emit()
-        self._z_min_endstop_test_completed = False
-        self.onZMinEndstopTestCompleted.emit()
-
-        self.heatedBedChanged.emit()
-
-    @pyqtProperty(bool, notify = onBedTestCompleted)
-    def bedTestCompleted(self):
-        return self._bed_test_completed
-
-    @pyqtProperty(bool, notify = onHotendTestCompleted)
-    def hotendTestCompleted(self):
-        return self._hotend_test_completed
-
-    @pyqtProperty(bool, notify = onXMinEndstopTestCompleted)
-    def xMinEndstopTestCompleted(self):
-        return self._x_min_endstop_test_completed
-
-    @pyqtProperty(bool, notify=onYMinEndstopTestCompleted)
-    def yMinEndstopTestCompleted(self):
-        return self._y_min_endstop_test_completed
-
-    @pyqtProperty(bool, notify=onZMinEndstopTestCompleted)
-    def zMinEndstopTestCompleted(self):
-        return self._z_min_endstop_test_completed
-
-    @pyqtProperty(float, notify = bedTemperatureChanged)
-    def bedTemperature(self):
-        if not self._output_device:
-            return 0
-        return self._output_device.bedTemperature
-
-    @pyqtProperty(float, notify=hotendTemperatureChanged)
-    def hotendTemperature(self):
-        if not self._output_device:
-            return 0
-        return self._output_device.hotendTemperatures[0]
-
-    def _onHotendTemperatureChanged(self):
-        if not self._output_device:
-            return
-        if not self._hotend_test_completed:
-            if self._output_device.hotendTemperatures[0] + 10 > self._hotend_target_temp and self._output_device.hotendTemperatures[0] - 10 < self._hotend_target_temp:
-                self._hotend_test_completed = True
-                self.onHotendTestCompleted.emit()
-
-    def _onBedTemperatureChanged(self):
-        if not self._output_device:
-            return
-        if not self._bed_test_completed:
-            if self._output_device.bedTemperature + 5 > self._bed_target_temp and self._output_device.bedTemperature - 5 < self._bed_target_temp:
-                self._bed_test_completed = True
-                self.onBedTestCompleted.emit()
-
-    def _onEndstopStateChanged(self, switch_type, state):
-        if state:
-            if switch_type == "x_min":
-                self._x_min_endstop_test_completed = True
-                self.onXMinEndstopTestCompleted.emit()
-            elif switch_type == "y_min":
-                self._y_min_endstop_test_completed = True
-                self.onYMinEndstopTestCompleted.emit()
-            elif switch_type == "z_min":
-                self._z_min_endstop_test_completed = True
-                self.onZMinEndstopTestCompleted.emit()
-
-    checkStartedChanged = pyqtSignal()
-
-    @pyqtProperty(bool, notify = checkStartedChanged)
-    def checkStarted(self):
-        return self._check_started
-
-    @pyqtSlot()
-    def startCheck(self):
-        self._check_started = True
-        self.checkStartedChanged.emit()
-        output_devices = self._getPrinterOutputDevices()
-        if output_devices:
-            self._output_device = output_devices[0]
-            try:
-                self._output_device.sendCommand("M18") # Turn off all motors so the user can move the axes
-                self._output_device.startPollEndstop()
-                self._output_device.bedTemperatureChanged.connect(self.bedTemperatureChanged)
-                self._output_device.hotendTemperaturesChanged.connect(self.hotendTemperatureChanged)
-                self._output_device.bedTemperatureChanged.connect(self._onBedTemperatureChanged)
-                self._output_device.hotendTemperaturesChanged.connect(self._onHotendTemperatureChanged)
-                self._output_device.endstopStateChanged.connect(self._onEndstopStateChanged)
-            except AttributeError as e:  # Connection is probably not a USB connection. Something went pretty wrong if this happens.
-                Logger.log("e", "An exception occurred while starting end stop polling: %s" % str(e))
-
-    @pyqtSlot()
-    def cooldownHotend(self):
-        if self._output_device is not None:
-            self._output_device.setTargetHotendTemperature(0, 0)
-
-    @pyqtSlot()
-    def cooldownBed(self):
-        if self._output_device is not None:
-            self._output_device.setTargetBedTemperature(0)
-
-    @pyqtSlot()
-    def heatupHotend(self):
-        if self._output_device is not None:
-            self._output_device.setTargetHotendTemperature(0, self._hotend_target_temp)
-
-    @pyqtSlot()
-    def heatupBed(self):
-        if self._output_device is not None:
-            self._output_device.setTargetBedTemperature(self._bed_target_temp)
-
-    heatedBedChanged = pyqtSignal()
-
-    @pyqtProperty(bool, notify = heatedBedChanged)
-    def hasHeatedBed(self):
-        global_container_stack = Application.getInstance().getGlobalContainerStack()
-        return global_container_stack.getProperty("machine_heated_bed", "value")
\ No newline at end of file
diff --git a/plugins/UltimakerMachineActions/UMOCheckupMachineAction.qml b/plugins/UltimakerMachineActions/UMOCheckupMachineAction.qml
deleted file mode 100644
index 2a01cfaa40..0000000000
--- a/plugins/UltimakerMachineActions/UMOCheckupMachineAction.qml
+++ /dev/null
@@ -1,288 +0,0 @@
-import UM 1.2 as UM
-import Cura 1.0 as Cura
-
-import QtQuick 2.2
-import QtQuick.Controls 1.1
-import QtQuick.Layouts 1.1
-import QtQuick.Window 2.1
-
-Cura.MachineAction
-{
-    anchors.fill: parent;
-    Item
-    {
-        id: checkupMachineAction
-        anchors.fill: parent;
-        property int leftRow: (checkupMachineAction.width * 0.40) | 0
-        property int rightRow: (checkupMachineAction.width * 0.60) | 0
-        property bool heatupHotendStarted: false
-        property bool heatupBedStarted: false
-        property bool printerConnected: Cura.MachineManager.printerConnected
-
-        UM.I18nCatalog { id: catalog; name: "cura"}
-        Label
-        {
-            id: pageTitle
-            width: parent.width
-            text: catalog.i18nc("@title", "Check Printer")
-            wrapMode: Text.WordWrap
-            font.pointSize: 18;
-        }
-
-        Label
-        {
-            id: pageDescription
-            anchors.top: pageTitle.bottom
-            anchors.topMargin: UM.Theme.getSize("default_margin").height
-            width: parent.width
-            wrapMode: Text.WordWrap
-            text: catalog.i18nc("@label", "It's a good idea to do a few sanity checks on your Ultimaker. You can skip this step if you know your machine is functional");
-        }
-
-        Row
-        {
-            id: startStopButtons
-            anchors.top: pageDescription.bottom
-            anchors.topMargin: UM.Theme.getSize("default_margin").height
-            anchors.horizontalCenter: parent.horizontalCenter
-            width: childrenRect.width
-            spacing: UM.Theme.getSize("default_margin").width
-            Button
-            {
-                id: startCheckButton
-                text: catalog.i18nc("@action:button","Start Printer Check");
-                onClicked:
-                {
-                    checkupMachineAction.heatupHotendStarted = false;
-                    checkupMachineAction.heatupBedStarted = false;
-                    manager.startCheck();
-                    startCheckButton.visible = false;
-                }
-            }
-        }
-
-        Item
-        {
-            id: checkupContent
-            anchors.top: startStopButtons.bottom
-            anchors.topMargin: UM.Theme.getSize("default_margin").height
-            visible: manager.checkStarted
-            width: parent.width
-            height: 250
-            //////////////////////////////////////////////////////////
-            Label
-            {
-                id: connectionLabel
-                width: checkupMachineAction.leftRow
-                anchors.left: parent.left
-                anchors.top: parent.top
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label","Connection: ")
-            }
-            Label
-            {
-                id: connectionStatus
-                width: checkupMachineAction.rightRow
-                anchors.left: connectionLabel.right
-                anchors.top: parent.top
-                wrapMode: Text.WordWrap
-                text: checkupMachineAction.printerConnected ? catalog.i18nc("@info:status","Connected"): catalog.i18nc("@info:status","Not connected")
-            }
-            //////////////////////////////////////////////////////////
-            Label
-            {
-                id: endstopXLabel
-                width: checkupMachineAction.leftRow
-                anchors.left: parent.left
-                anchors.top: connectionLabel.bottom
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label","Min endstop X: ")
-                visible: checkupMachineAction.printerConnected
-            }
-            Label
-            {
-                id: endstopXStatus
-                width: checkupMachineAction.rightRow
-                anchors.left: endstopXLabel.right
-                anchors.top: connectionLabel.bottom
-                wrapMode: Text.WordWrap
-                text: manager.xMinEndstopTestCompleted ? catalog.i18nc("@info:status","Works") : catalog.i18nc("@info:status","Not checked")
-                visible: checkupMachineAction.printerConnected
-            }
-            //////////////////////////////////////////////////////////////
-            Label
-            {
-                id: endstopYLabel
-                width: checkupMachineAction.leftRow
-                anchors.left: parent.left
-                anchors.top: endstopXLabel.bottom
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label","Min endstop Y: ")
-                visible: checkupMachineAction.printerConnected
-            }
-            Label
-            {
-                id: endstopYStatus
-                width: checkupMachineAction.rightRow
-                anchors.left: endstopYLabel.right
-                anchors.top: endstopXLabel.bottom
-                wrapMode: Text.WordWrap
-                text: manager.yMinEndstopTestCompleted ? catalog.i18nc("@info:status","Works") : catalog.i18nc("@info:status","Not checked")
-                visible: checkupMachineAction.printerConnected
-            }
-            /////////////////////////////////////////////////////////////////////
-            Label
-            {
-                id: endstopZLabel
-                width: checkupMachineAction.leftRow
-                anchors.left: parent.left
-                anchors.top: endstopYLabel.bottom
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label","Min endstop Z: ")
-                visible: checkupMachineAction.printerConnected
-            }
-            Label
-            {
-                id: endstopZStatus
-                width: checkupMachineAction.rightRow
-                anchors.left: endstopZLabel.right
-                anchors.top: endstopYLabel.bottom
-                wrapMode: Text.WordWrap
-                text: manager.zMinEndstopTestCompleted ? catalog.i18nc("@info:status","Works") : catalog.i18nc("@info:status","Not checked")
-                visible: checkupMachineAction.printerConnected
-            }
-            ////////////////////////////////////////////////////////////
-            Label
-            {
-                id: nozzleTempLabel
-                width: checkupMachineAction.leftRow
-                height: nozzleTempButton.height
-                anchors.left: parent.left
-                anchors.top: endstopZLabel.bottom
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label","Nozzle temperature check: ")
-                visible: checkupMachineAction.printerConnected
-            }
-            Label
-            {
-                id: nozzleTempStatus
-                width: (checkupMachineAction.rightRow * 0.4) | 0
-                anchors.top: nozzleTempLabel.top
-                anchors.left: nozzleTempLabel.right
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@info:status","Not checked")
-                visible: checkupMachineAction.printerConnected
-            }
-            Item
-            {
-                id: nozzleTempButton
-                width: (checkupMachineAction.rightRow * 0.3) | 0
-                height: childrenRect.height
-                anchors.top: nozzleTempLabel.top
-                anchors.left: bedTempStatus.right
-                anchors.leftMargin: Math.round(UM.Theme.getSize("default_margin").width/2)
-                visible: checkupMachineAction.printerConnected
-                Button
-                {
-                    text: checkupMachineAction.heatupHotendStarted ? catalog.i18nc("@action:button","Stop Heating") : catalog.i18nc("@action:button","Start Heating")
-                    onClicked:
-                    {
-                        if (checkupMachineAction.heatupHotendStarted)
-                        {
-                            manager.cooldownHotend()
-                            checkupMachineAction.heatupHotendStarted = false
-                        } else
-                        {
-                            manager.heatupHotend()
-                            checkupMachineAction.heatupHotendStarted = true
-                        }
-                    }
-                }
-            }
-            Label
-            {
-                id: nozzleTemp
-                anchors.top: nozzleTempLabel.top
-                anchors.left: nozzleTempButton.right
-                anchors.leftMargin: UM.Theme.getSize("default_margin").width
-                width: (checkupMachineAction.rightRow * 0.2) | 0
-                wrapMode: Text.WordWrap
-                text: manager.hotendTemperature + "°C"
-                font.bold: true
-                visible: checkupMachineAction.printerConnected
-            }
-            /////////////////////////////////////////////////////////////////////////////
-            Label
-            {
-                id: bedTempLabel
-                width: checkupMachineAction.leftRow
-                height: bedTempButton.height
-                anchors.left: parent.left
-                anchors.top: nozzleTempLabel.bottom
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label","Build plate temperature check:")
-                visible: checkupMachineAction.printerConnected && manager.hasHeatedBed
-            }
-
-            Label
-            {
-                id: bedTempStatus
-                width: (checkupMachineAction.rightRow * 0.4) | 0
-                anchors.top: bedTempLabel.top
-                anchors.left: bedTempLabel.right
-                wrapMode: Text.WordWrap
-                text: manager.bedTestCompleted ? catalog.i18nc("@info:status","Not checked"): catalog.i18nc("@info:status","Checked")
-                visible: checkupMachineAction.printerConnected && manager.hasHeatedBed
-            }
-            Item
-            {
-                id: bedTempButton
-                width: (checkupMachineAction.rightRow * 0.3) | 0
-                height: childrenRect.height
-                anchors.top: bedTempLabel.top
-                anchors.left: bedTempStatus.right
-                anchors.leftMargin: Math.round(UM.Theme.getSize("default_margin").width/2)
-                visible: checkupMachineAction.printerConnected && manager.hasHeatedBed
-                Button
-                {
-                    text: checkupMachineAction.heatupBedStarted ?catalog.i18nc("@action:button","Stop Heating") : catalog.i18nc("@action:button","Start Heating")
-                    onClicked:
-                    {
-                        if (checkupMachineAction.heatupBedStarted)
-                        {
-                            manager.cooldownBed()
-                            checkupMachineAction.heatupBedStarted = false
-                        } else
-                        {
-                            manager.heatupBed()
-                            checkupMachineAction.heatupBedStarted = true
-                        }
-                    }
-                }
-            }
-            Label
-            {
-                id: bedTemp
-                width: (checkupMachineAction.rightRow * 0.2) | 0
-                anchors.top: bedTempLabel.top
-                anchors.left: bedTempButton.right
-                anchors.leftMargin: UM.Theme.getSize("default_margin").width
-                wrapMode: Text.WordWrap
-                text: manager.bedTemperature + "°C"
-                font.bold: true
-                visible: checkupMachineAction.printerConnected && manager.hasHeatedBed
-            }
-            Label
-            {
-                id: resultText
-                visible: false
-                anchors.top: bedTemp.bottom
-                anchors.topMargin: UM.Theme.getSize("default_margin").height
-                anchors.left: parent.left
-                width: parent.width
-                wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label", "Everything is in order! You're done with your CheckUp.")
-            }
-        }
-    }
-}
\ No newline at end of file