Add files via upload

1 files changed, 70 insertions, 0 deletions

diff --git a/resources/definitions/SV01.def.json b/resources/definitions/SV01.def.json
new file mode 100644
index 0000000000..fb410151a9
--- /dev/null
+++ b/resources/definitions/SV01.def.json
@@ -0,0 +1,70 @@
+{

+    "version": 2,

+    "name": "Sovol-SV01",

+    "inherits": "fdmprinter",

+    "metadata": {

+        "visible": true,

+        "author": "Sovol",

+        "manufacturer": "Sovol 3D",

+        "file_formats": "text/x-gcode",

+        "has_variants": false,

+        "has_machine_quality": false,

+        "preferred_quality_type": "draft",

+        "machine_extruder_trains": {

+            "0": "SV01_extruder_0"

+        }

+    },

+	

+    "overrides": {

+        "machine_name": { "default_value": "SV01" },

+        "machine_extruder_count": { "default_value": 1 },

+        "machine_width": { "default_value": 280 },

+        "machine_depth": { "default_value": 260 },

+        "machine_height": { "default_value": 300 },	

+        "machine_max_feedrate_x": { "value": 500 },

+        "machine_max_feedrate_y": { "value": 500 },

+        "machine_max_feedrate_z": { "value": 10 },

+        "machine_max_feedrate_e": { "value": 50 },

+        "machine_max_acceleration_x": { "value": 500 },

+        "machine_max_acceleration_y": { "value": 500 },

+        "machine_max_acceleration_z": { "value": 100 },

+        "machine_max_acceleration_e": { "value": 5000 },

+        "machine_acceleration": { "value": 500 },

+        "machine_max_jerk_xy": { "value": 10 },

+        "machine_max_jerk_z": { "value": 0.4 },

+        "machine_max_jerk_e": { "value": 5 },

+        "machine_heated_bed": { "default_value": true },

+        "material_diameter": { "default_value": 1.75 },

+        "acceleration_print": { "value": 500 },

+        "acceleration_travel": { "value": 500 },

+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },

+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },

+        "jerk_print": { "value": 8 },

+        "jerk_travel": { "value": "jerk_print" },

+        "jerk_travel_layer_0": { "value": "jerk_travel" },

+        "acceleration_enabled": { "value": false },

+        "jerk_enabled": { "value": false },

+        "speed_print": { "value": 50.0 } ,

+        "speed_infill": { "value": "speed_print" },

+        "skirt_brim_speed": { "value": "speed_layer_0" },

+        "line_width": { "value": "machine_nozzle_size" },

+        "optimize_wall_printing_order": { "value": "True" },

+        "material_initial_print_temperature": { "value": "material_print_temperature" },

+        "material_final_print_temperature": { "value": "material_print_temperature" },

+        "material_flow": { "value": 100 },

+        "z_seam_type": { "value": "'back'" },

+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },       

+        "infill_sparse_density": { "value": "20" },

+        "infill_pattern": { "value": "'lines'" },

+        "infill_before_walls": { "value": false },

+        "infill_overlap": { "value": 30.0 },

+        "skin_overlap": { "value": 10.0 },

+        "infill_wipe_dist": { "value": 0.0 },

+        "wall_0_wipe_dist": { "value": 0.0 },      

+        "retraction_amount": { "default_value": 3},

+        "retraction_speed": { "default_value": 50},

+        "adhesion_type": { "value": "'skirt'" },

+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },

+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }

+    }

+}
\ No newline at end of file