diff options
| author | pinchies <pinchies@gmail.com> | 2019-01-01 18:58:19 +0300 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2019-01-01 18:58:19 +0300 |
| commit | 208811f383322c8b28dceeb6d2d13af567461636 (patch) | |
| tree | faf0aca9694aced19883fbd9d144c5f19882fc06 /resources/definitions/alfawise_u20.def.json | |
| parent | 47ed9e3f5db99114f30c884cea413dc4949544ec (diff) | |
fix start gcode on alfawise u20
small tweak to fixestart gcode to avoid default position of bed clamps
Diffstat (limited to 'resources/definitions/alfawise_u20.def.json')
| -rw-r--r-- | resources/definitions/alfawise_u20.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/alfawise_u20.def.json b/resources/definitions/alfawise_u20.def.json index abc206c4d2..e8ea283670 100644 --- a/resources/definitions/alfawise_u20.def.json +++ b/resources/definitions/alfawise_u20.def.json @@ -18,7 +18,7 @@ "default_value": "Alfawise U20" }, "machine_start_gcode": { - "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --" + "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 Y60.0 Z0 E9.0 F1000.0;intro line\nG1 Y100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --" }, "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --" |