diff options
| author | Walt Sorensen <photodude@users.noreply.github.com> | 2019-09-27 04:26:10 +0300 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2019-09-27 04:26:10 +0300 |
| commit | 827f84bd6a34de7d052bbbccaa18391e750a3bcd (patch) | |
| tree | 809a4fed0fb9ff277a6b5603aa5a519a28360260 /resources/definitions/bibo2_dual.def.json | |
| parent | 648f167911134ce15ac7b9e44619bfa47589817f (diff) | |
Set BIBO print speed to 40mm/s
BIBO and members from the BIBO group on Facebook say this printer should be run at 40-45mm/s and not the FDMprinter default of 60mm/s. BIBO provided test gcode files also show that they are setting 40mm/s in the slicer to create their test files.
This change sets the print speed override so the printer profile does not start at the FDMPrinter print speed default of 60mm/s but at the reccommended value of 40mm/s
Diffstat (limited to 'resources/definitions/bibo2_dual.def.json')
| -rw-r--r-- | resources/definitions/bibo2_dual.def.json | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/resources/definitions/bibo2_dual.def.json b/resources/definitions/bibo2_dual.def.json index e86c979260..dbfb03a0c9 100644 --- a/resources/definitions/bibo2_dual.def.json +++ b/resources/definitions/bibo2_dual.def.json @@ -78,6 +78,9 @@ "machine_end_gcode": {
"default_value": ";End GCode\nM104 T0 S0 ;extruder heater off\nM104 T1 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91\nG1 Z1 F100 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-2 X-20 Y-20 F300 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
},
+ "speed_print": {
+ "default_value": 40
+ },
"machine_extruder_count": {
"default_value": 2
},
|