Fix BQ Hephestos 2 definition

The settings were in the wrong category. They were defined by value instead of default value, and the metadata was in there double.

Contributes to issue CURA-1278.

1 files changed, 32 insertions, 33 deletions

diff --git a/resources/definitions/bq_hephestos_2.def.json b/resources/definitions/bq_hephestos_2.def.json
index dba849ac7e..578f166bcb 100644
--- a/resources/definitions/bq_hephestos_2.def.json
+++ b/resources/definitions/bq_hephestos_2.def.json
@@ -17,10 +17,6 @@
         },
         "file_formats": "text/x-gcode"
     },
-    "manufacturer": "BQ",
-    "author": "BQ",
-    "platform": "bq_hephestos_2_platform.stl",
-    "file_formats": "text/x-gcode",
 
     "overrides": {
         "machine_start_gcode": {
@@ -30,91 +26,94 @@
             "default_value": "; -- END GCODE --\nM801        ; Custom GCODE to fire end print procedure\n; -- end of END GCODE --"
         },
         "machine_width": {
-            "value": 210
+            "default_value": 210
         },
         "machine_depth": {
-            "value": 297
+            "default_value": 297
         },
         "machine_height": {
-            "value": 220
+            "default_value": 220
         },
         "machine_heated_bed": {
-            "value": false
+            "default_value": false
         },
         "machine_center_is_zero": {
-            "value": false
+            "default_value": false
         },
         "machine_gcode_flavor": {
-            "value": "RepRap"
+            "default_value": "RepRap"
+        },
+        "machine_platform_offset": {
+            "default_value": [6, 1320, 0]
         },
         "material_print_temperature": {
-            "value": 210.0
+            "default_value": 210
         },
         "material_bed_temperature": {
-            "value": 0
+            "default_value": 0
         },
         "material_diameter": {
-            "value": 1.75
+            "default_value": 1.75
         },
         "layer_height": {
-            "value": 0.2
+            "default_value": 0.2
         },
         "layer_height_0": {
-            "value": 0.2
+            "default_value": 0.2
         },
         "wall_line_count": {
-            "value": 3
+            "default_value": 3
         },
         "wall_thickness": {
-            "value": 1.2
+            "default_value": 1.2
         },
         "top_bottom_thickness": {
-            "value": 1.2
+            "default_value": 1.2
         },
         "infill_sparse_density": {
-            "value": 20.0
+            "default_value": 20
         },
         "infill_overlap": {
-            "value": 15.0
+            "default_value": 15
         },
         "speed_print": {
-            "value": 60.0
+            "default_value": 60
         },
         "speed_travel": {
-            "value": 160.0
+            "default_value": 160
         },
         "speed_layer_0": {
-            "value": 30.0
+            "default_value": 30
         },
         "speed_wall_x": {
-            "value": 35.0
+            "default_value": 35
         },
         "speed_wall_0": {
-            "value": 30.0
+            "default_value": 30
         },
         "speed_infill": {
-            "value": 80.0
+            "default_value": 80
         },
         "speed_topbottom": {
-            "value": 35.0
+            "default_value": 35
         },
         "skirt_speed": {
-            "value": 35.0
+            "default_value": 35
         },
         "skirt_line_count": {
-            "value": 4
+            "default_value": 4
         },
         "skirt_minimal_length": {
-            "value": 30.0
+            "default_value": 30
         },
         "skirt_gap": {
-            "value": 6.0
+            "default_value": 6
         },
         "cool_fan_full_at_height": {
-            "value": 0.4
+            "default_value": 0.4
         },
         "support_enable": {
-            "value": false
+            "default_value": false
         }
     }
 }