diff options
| author | fieldOfView <aldo@fieldofview.com> | 2016-06-13 17:14:16 +0300 |
|---|---|---|
| committer | fieldOfView <aldo@fieldofview.com> | 2016-06-13 17:14:16 +0300 |
| commit | 33c4e861639e897dfab1af751f20ac6a7960f777 (patch) | |
| tree | 481b01587f4099154d78305d8c60c8ac1baafb25 /resources/definitions/bq_hephestos_xl.def.json | |
| parent | 18e69c75808a1c9bc9c382fa078752f09a708bb7 (diff) | |
Change abbreviation of "seconds" to IEEE-recommended "s" (instead of "sec")
Diffstat (limited to 'resources/definitions/bq_hephestos_xl.def.json')
| -rw-r--r-- | resources/definitions/bq_hephestos_xl.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/bq_hephestos_xl.def.json b/resources/definitions/bq_hephestos_xl.def.json index 19b6d3e1b5..2b451627a9 100644 --- a/resources/definitions/bq_hephestos_xl.def.json +++ b/resources/definitions/bq_hephestos_xl.def.json @@ -16,7 +16,7 @@ "overrides": { "machine_start_gcode": { - "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/sec\n; -- end of START GCODE --" + "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --" }, "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG1 Z10 ;move extruder up 10 mm\nG90 ;set to absolute positioning\nG1 X0 Y180 F1200 ;expose the platform\nM84 ;turn off steppers\n; -- end of END GCODE --" |