Merge pull request #4501 from stelgenhof/master

Ender-3 machine definition update

1 files changed, 5 insertions, 5 deletions

diff --git a/resources/definitions/creality_ender3.def.json b/resources/definitions/creality_ender3.def.json
index f3010ee20b..0fd4b64455 100755
--- a/resources/definitions/creality_ender3.def.json
+++ b/resources/definitions/creality_ender3.def.json
@@ -19,13 +19,13 @@
             "default_value": "Creality Ender-3"
         },
         "machine_width": {
-            "default_value": 220
+            "default_value": 235
         },
         "machine_height": {
             "default_value": 250
         },
         "machine_depth": {
-            "default_value": 220
+            "default_value": 235
         },
         "machine_heated_bed": {
             "default_value": true
@@ -64,7 +64,7 @@
         },
         "layer_height_0": {
             "default_value": 0.2
-        },
+        },        
         "adhesion_type": {
             "default_value": "skirt"
         },
@@ -87,10 +87,10 @@
             "default_value": 5
         },
         "machine_start_gcode": {
-            "default_value": "; Ender 3 Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nG1 Z5.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z5.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed"
+            "default_value": "; Ender 3 Custom Start G-code\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n; End of custom start GCode"
         },
         "machine_end_gcode": {
-            "default_value": "; Ender 3 Custom End G-code\nG4 ; Wait\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F1800 E-3 ; Retract filament 3 mm to prevent oozing\nG1 F3000 Z10 ; Move Z Axis up 10 mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal\nM104 S0 ; Turn off Extruder temperature\nM140 S0 ; Turn off Heat Bed\nM106 S0 ; Turn off Cooling Fan\nM107 ; Turn off Fan\nM84 ; Disable stepper motors"
+            "default_value": "; Ender 3 Custom End G-code\nG4 ; Wait\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F1800 E-3 ; Retract filament 3 mm to prevent oozing\nG1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal\nM84 ; Disable stepper motors\n; End of custom end GCode"
         }
     }
 }