diff options
author | orel Windows <aurelien.gibaud@gmail.com> | 2017-11-15 13:39:54 +0300 |
---|---|---|
committer | orel Windows <aurelien.gibaud@gmail.com> | 2017-11-20 12:40:25 +0300 |
commit | 05b4689bd6e34a3c5eb792020eac94be1be260d4 (patch) | |
tree | 220a10fb491d8fbee7bd219105fadfe90ac0019e /resources/definitions/dagoma_discoeasy200.def.json | |
parent | 8522fbf6f52b2f052fd0f8525387ff6059e21fe3 (diff) |
Improve discoeasy200 profile, especially the machine gcode start as it uses 'print_temperature' which is an invalid Cura setting.
Diffstat (limited to 'resources/definitions/dagoma_discoeasy200.def.json')
-rw-r--r-- | resources/definitions/dagoma_discoeasy200.def.json | 23 |
1 files changed, 11 insertions, 12 deletions
diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json index 8f1a792bc0..ef9a6084c8 100644 --- a/resources/definitions/dagoma_discoeasy200.def.json +++ b/resources/definitions/dagoma_discoeasy200.def.json @@ -8,7 +8,7 @@ "author": "Dagoma", "manufacturer": "Dagoma", "file_formats": "text/x-gcode", - "icon": "icon_ultimaker2.png", + "icon": "icon_discoeasy200.png", "platform": "discoeasy200.stl", "platform_offset": [ 105, -59, 280] }, @@ -30,24 +30,23 @@ }, "machine_head_with_fans_polygon": { "default_value": [ - [16, 37], - [16, -65], - [-16, -65], - [16, 37] + [17, 70], + [17, -40], + [-17, -40], + [17, 70] ] }, "gantry_height": { - "default_value": 55 - }, - "machine_gcode_flavor": { - "default_value": "RepRap" + "default_value": 10 }, "machine_start_gcode": { - "default_value": ";Gcode by Cura\nG90 ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{print_temperature}\nM140 S{material_bed_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F3000\n" + "default_value": ";Gcode by Cura\nG90 ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{material_initial_print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{material_initial_print_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F6000" }, "machine_end_gcode": { - "default_value": "\nM104 S0\nM106 S255 ;start fan full power\nM140 S0 ;heated bed heater off (if you have it)\n;Home machine\nG91 ;relative positioning\nG1 E-1 F{retraction_speed} ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000 ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107 ;stop fan\n;Shut down motor\nM84 ;shut down motors\n" + "default_value": "M104 S0\nM106 S255 ;start fan full power\nM140 S0 ;heated bed heater off (if you have it)\n;Home machine\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000 ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107 ;stop fan\n;Shut down motor\nM84 ;shut down motors" + }, + "material_diameter": { + "default_value": 1.75 } } } - |