diff options
author | Jaime van Kessel <nallath@gmail.com> | 2017-06-26 16:02:24 +0300 |
---|---|---|
committer | Jaime van Kessel <nallath@gmail.com> | 2017-06-26 16:02:24 +0300 |
commit | 568b0c2285b76a00ebc7f761469260957c03c527 (patch) | |
tree | 7e143720eafae7cf2f020ca8673a676ecfc9a4fb /resources/definitions/dagoma_discoeasy200.def.json | |
parent | 71c262040f814d501a373194f92dcdcfe9c9af3d (diff) |
Changed start code of Dagoma printer to indicate it's created by cura.
Originally it said it was created by Cura-by-dagoma, which is not the case. CURA-3966
Diffstat (limited to 'resources/definitions/dagoma_discoeasy200.def.json')
-rwxr-xr-x | resources/definitions/dagoma_discoeasy200.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json index cc0dca2918..3408c917a6 100755 --- a/resources/definitions/dagoma_discoeasy200.def.json +++ b/resources/definitions/dagoma_discoeasy200.def.json @@ -50,7 +50,7 @@ "default_value": "RepRap" }, "machine_start_gcode": { - "default_value": ";Gcode by Cura-by-dagoma for DiscoEASY200 V2.6\nG90 ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{print_temperature}\nM140 S{material_bed_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F3000\n" + "default_value": ";Gcode by Cura\nG90 ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{print_temperature}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{print_temperature}\nM140 S{material_bed_temperature}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F3000\n" }, "machine_end_gcode": { "default_value": "\nM104 S0\nM106 S255 ;start fan full power\nM140 S0 ;heated bed heater off (if you have it)\n;Home machine\nG91 ;relative positioning\nG1 E-1 F{retraction_speed} ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000 ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107 ;stop fan\n;Shut down motor\nM84 ;shut down motors\n" |